Question about Epson TM-U220 Matrix Printer

2 Answers

TM-U220 printer is not printing anything.

I have installed Epson TM-U220 printers successfully.but it cann't print the test page and anything.Even if it is ready mode.

Posted by on

  • BizDales May 25, 2008

    I have just installed the Epson TM-U220 on a pc running Windows XP with service pack2, but it does not print anything. When I tried to print and look at the printer spool, the job seemed to have printed successfully, but nothing came out of the printer. HELP :-)

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers

@(JRGARING),You cannot perform a self test if it will not print! Duh! Please check to see if your knife, auto cut , has fully retracted. I just had this problem myself, and found this to be the issue.
My TM-U220B would not do anything. It wasn't till I tried pulling paper through that I noticed it was VERY difficult if not possible to pull paper through I removed the cover and exposed the cog that manually retracts the knife. Now it will self test and feed, but lol, will not complete the second half of the self test and the little red light flashes....oh me oh my. I will connect the cable to rule out this being the problem of the unit completing the self test....stay tuned.

Posted on Jan 01, 2015

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Do a self-test first. Perform by holding down the feed button then powering on the printer. if it prints then it is not a printer issue, but a driver or cable issue.

Posted on Aug 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson UB-U03II not working


I had huge issues with my TM-U220. It does not play well with a Centronix-to-USB cable or with Windows 64-bit. I played for AGES to try and get it all to work.

I installed the USB device driver[1] I was able to print the Test Page proving that the connection between Windows and the printer sort of worked, but when I tried printing anything from Unicenta POS, it always failed.

I finally bought a new Centronix-to-USB and a new parallel port card, used Windows 32-bit, and problem solved.

They key is to uninstall everything, including searching through the Registry to delete everything.
[1] https://pos.epson.com/developers/techresdetails.htm?ProductPK=545

May 30, 2014 | Epson TM-U220 Matrix Printer

2 Answers

Epson tm-u220 not printing receipt info, but printing random symbols


Hello
Try to re install the drivers. Uninstall the old drivers first

Oct 03, 2012 | Epson TM-U220 Matrix Printer

1 Answer

Unable to install Epson TM-U220B[U220 with UB-U02III usb interface] on Windows 7 AND XP!


Hi!

Are you using a third party USB adapter or a USB interface? On the self test page that you printed does it say USB connection or something that will say about USB? or does it say parallel or serial connection? try to check the dip switches setting if its configured properly. visit epsonexperts.com site for more info.

Dec 24, 2011 | Epson TM-U220 Matrix Printer

1 Answer

Epson TM-U220D Receipt Printing Problem


mau download driver epson tm-u220d ga ada...
klo mau cari dimana yah

Oct 21, 2008 | Epson TM-U220 Matrix Printer

4 Answers

Problem setting up TM-U220


print the self-test, push the feed botton while powering on...
you can see there the serial interface...
baud rate, data bits, parity, stop bit etc...
then go to the printer and faxes,
right click the epson driver and click properties...
go to the ports window...
click on the epson tm u220 reciept.
click configure port...
adjust the baud rate as same as in the self test...
it works...

May 22, 2008 | Epson TM-U220 Matrix Printer

1 Answer

Tm-u220 problem.


it cann't print the test page

Apr 20, 2008 | Epson TM-U220 Matrix Printer

2 Answers

How to eject cash drawer pos


Open the Cash Drawer
Hex code
<1B><70><30><40><50>

Apr 03, 2008 | Epson TM-U220 Matrix Printer

1 Answer

Epson tm u220


What type of interface card are you using to connect printer to your computer?

Mar 14, 2008 | Epson TM-U220 Matrix Printer

5 Answers

My Printer EPSON TM-U220 does not print....HELP!!!!!


Change port to Printer port Lpt1 not the esdprt. then uncheck enable bidirectional support/ Restart computer and then try to do a windows test page

Jan 14, 2008 | Epson TM-U220 Matrix Printer

4 Answers

Epson TM-U220 Matrix Printer not printing in WinXPP


hi basiime

possible issue is port configuration. if the generic text driver works, apd driver should work too.

what may be happen is that when you install the apd driver the other printer drivers that you have were still using the same port that your apd driver were using. example, you have generic txt assigned to lpt1 and then the apd were assigned on the same port, this is were you get the trouble.

what you must do is, first, check any printer driver that you have using the lpt, say for example, you generic text is using lpt1, when you install the apd driver set it to lpt2. apd drivers will create a new port normally called esdprt. try to use that port but if that will not work reassigned the port of your apd driver to lpt2 printer port then uncheck bi-directional support. from there you should be able to print..

hope that resolves your issue.. =)

Nov 27, 2007 | Epson TM-U220 Matrix Printer

Not finding what you are looking for?
Epson TM-U220 Matrix Printer Logo

1,262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...