Question about Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

Error message turn the powe off and on again

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 455 Answers

Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa

Posted on Jun 11, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

OKI PM 4410, Will not stop printing


Try to unistall your printer from your computer download drivers again for your printer and install it again.It's you printer driver error.

Mar 02, 2016 | Office Equipment & Supplies

1 Answer

No turn on


pow pow pow pow
check all 4
power circuit breaker at panel power cord power outlet on wall
power switch on unit

Jul 11, 2012 | Amcor KF 9000 BTU Silver Portable Air...

1 Answer

ERROR CODE BLINKING,THE AIR CONDITIONER DOESNT WORK


it is happening due to blower motor not giving the signal to pcb pls check their is a return signal wire in blower motor is broken or motor is defective.

Jul 20, 2010 | Sanyo Split System Air Conditioner

1 Answer

915GL gives beep when powe on but there is no


the memory card must be checked
do new installation

Mar 03, 2010 | Intel D915GAG Socket 775 Motherboard -...

1 Answer

Power Calibration error


powe calibration error reffers to lens laser power
in other words the laser doesn't have enough power to write CD/DVD at specified speed

try to clean the lens (there are special CD-s for that)
and try to burn the cd or DVD at slower speed

but slowly your cd writer is dying

Jul 08, 2009 | Sony Computers & Internet

2 Answers

What is the error POW 5 on a marantz sr 7500


I have a POW 5 failure on a marantz sr 7500. Anybody know how to fix?

Jun 02, 2009 | Marantz SR-7400 Receiver

4 Answers

Problem absorber full


Here and hope you find it useful. use the mp150 procedure

May 23, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

I get power to the stereo but no sound comes out


Hello eklypss2000,

According to the manual for the Alpine CDE-102, the message "DC ERROR" is displayed if there is a short to ground in the speaker wiring. Check all of your speaker wires and make sure that no bare wire is shorting against the vehicle metal or against other wires. Repair or replace the wire as necessary. After correcting the problem, set POWER IC to "POW ON" according to the instructions in your manual.

Hope this helps.

May 18, 2009 | Alpine Car Audio & Video

3 Answers

Error Message


Please check connecting cables with PC.
Unplug printer form AC outlet for couple of minutes and replug back in and check.

Jan 30, 2009 | Epson Stylus Photo RX600 All-In-One InkJet...

1 Answer

What does this Error Message mean?


hello AuburnCE, After 4 years of joy my Marantz SR8200 receiver also shows this message from time to time - after 1h of operation or so. Then it is hanging (like a PC ;o). Taking it of from the electricity network for a moment resolves the problem until the next POW 05 hang usually a fiew days later. I brought the receiver to an authorized Marantz maintenance and repair center twice now and they were not able to reproduce the error. They said this has directly or indirectly to do with the power supply unit. They also called marantz. For me it appears that this is not an internal receiver problem IN MY CASE. I think I there might be a relationship to zapping on my Topfield SAT receiver via power supply network as the connection is optical. Or my dimmerunit for the light. Unfortunately I do not have a separate electric circuit for Audio/Video and all other electrical devices. and dimmer units are well known to cause problems in the power supply chain - e.g. like noise in your audio package. Please note: the experts told me: Check POW 05 can have other (receiver internal) causes also. Above is just my suspicion 8as a non-expert) for my case . Regards, Fred

May 29, 2007 | Marantz ZR6001SP

Not finding what you are looking for?
Sony Cyber-shot  DSC-W55 Digital Camera Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

james laughton
james laughton

Level 3 Expert

2002 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

20118 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...