Question about Whirlpool LXR9445JT Top Load Washer
My whirlpool top loader washing machine willnotstop filling, what can i do.
You either have a defective pressure switch or water inlet valve. Start to fill the machine with warm water so that both solenoids on the water inlet valve (hot and cold) are activated. After about 30-60 seconds, push the timer knob in to stop water flow. If the water continues to flow, replace the water inlet valve. If this is the case, it may take a few times of starting and stopping water flow to allow solenoid to heat up and become symptomatic. If water flow stops abruptly each time knob is pushed in, you most likely have a defective pressure switch (water level switch).
Posted on May 09, 2008
Tips for a great answer:
Feb 07, 2015 | Whirlpool Washing Machines
Jul 24, 2013 | Washing Machines
May 20, 2011 | Whirlpool Washing Machines
Mar 03, 2011 | Whirlpool Ultimate Care II LSQ9564J Top...
Jul 06, 2009 | Whirlpool GSC9455 Top Load Washer
Apr 02, 2009 | Whirlpool Duet 3.8 cu. ft. Front Load...
Jan 26, 2009 | Whirlpool LXR9445JT Top Load Washer
Nov 25, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...
236 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: