Question about Makita Electrical Supplies

1 Answer

I hav a Makita G5711r Genrator that runs but the pilot light is off and it's not working (not charging). may it overloads? and what to do? Need to replce a fuse or something?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

HERE is a exploded parts view trace your wires and fuses will be show en there is also a rectifier in the wiring this controls the charging as well helps excite the stator to produce power in some gen heads replacement if this unit shod solve your issue hope this helps

Posted on Aug 31, 2010

Testimonial: "Thanks. I will try to replace that"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Makita DSS610 18v cordless circular saw stopped working mid cut. I changed the battery to another, fully charged, one but still nothing. Tried again next day, with both batteries, still nothing.


Hello Derek, it seems that your motor or motor brushes have failed please contact the manufacture about replacing the motor brushes.

Sep 15, 2016 | Makita Saws

1 Answer

Makita router overload reset


there is no overload reset. You have another problem, I am thinking the switch or cord. You can unplug and if you have a volt ohms meter start at the plug of the cord and work thru till problem is found. Usually the switch gets dust into it not allowing it to make contact.

Feb 21, 2012 | Makita Tools & Hardware - Others

2 Answers

What is electercity consumption of Minolta 5000 , i want to run it on petrol genrator ..Is 2KV genrator is enoghe


to the best of my knowledge most cameras would work on 110/220 V mains. your 2KV is too much for the camera by far. again if made to work with dc using ac current will ruin the camera.

Jul 04, 2011 | Photography

1 Answer

I have an older basic makita cordless drill worked fine until now battery charged and it doesnt work. charged again. still nothing- except the built in light on the drill lights up weird


if the battery show good on the charger and you have a light i would check the switch. you can do a hot wire connection to check it. you need you battery and two wire connedtors. disconnect your switch and hook your battery straight to the motor. if the motor turns it is your switch. if not, that's bad, probably the motor is gone.

Aug 15, 2010 | Makita Drills

3 Answers

MAKITA LXT BL1830 18V LITHIUM-ION 3.0AH BATTERY


If the charge count on the batteries is under 300, Makita will replace them. Makita has a known defect in this battery that causes the battery to shut down before it is dead. So as of now they are exchanging ones with low use.

If they are truly defective and makita won't replace, you have to open them, find the dead cell or blown fuse, and replace. Search youtube makita battery for a video on repairing this battery. But once the red and green lights on the charger flash, the the battery can't be charged on a Makita charger -- it's been locked. So use a third party charger.

Apr 18, 2010 | Makita 2 Bl1830 18v Battery,dc18ra Charger...

1 Answer

Dont know when battery is charging.


there are usually lights on the charger to indicate what mode it is in. Let me know if not and I will try and locate a manual for this. If you do need that I would need the exact model number for everything

Jun 06, 2009 | Makita Saws

1 Answer

Need to know what the lights mean on a makita dc24sa charger


• When the battery cartridge is inserted, the charging light color will change from green to red and charging will begin.
The charging light will remain lit steadily during charging.
• One red charging light indicates charged condition in 0 – 80% and two red ones indicates 80 – 100%.
• With finish of charge, the charging lights will change from two red ones to two green ones.
• The charging time is as follows:
Battery B9017A, BH1220, BH1420, BH9020A: approx. 20 minutes.
Battery B2417, BH1233, BH1433, BH2420, BH9033A: approx. 30 minutes.
Battery B2430, BH2433: approx. 60 minutes.

Nov 20, 2008 | Makita DC24SA 24 Volt Makstar Battery...

1 Answer

My oven


I have found that the pilot will get fouled with a light colored powder due to inpurities in the gas. I usually clean with a tooth brush and pipe cleaner (when cool - no pilot). Otherwise the thermocouple may need to be changed, or at lease re-adjusted to be nearer to the pilot flame. Cleaning every year is prudent.

Apr 21, 2008 | Ovens

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Makita Electrical Supplies Experts

obsteiner

Level 3 Expert

421 Answers

Tom Chichester

Level 3 Expert

35672 Answers

Ogbonna promise

Level 2 Expert

62 Answers

Are you a Makita Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...