Question about TV Receivers & DVRs

2 Answers

Supernet 2160T PVR

Hi
About 2 years ago I purchased a Supernet 2160T PVR from WOW Sight & Sound.
The OS is Digenius 3.41 (a company based in Germany)
There were some minor problems with this machine so I eventually decided to upgrade the firmware so I downloaded and installed the "latest firmware" from Digenius. This so called upgrade was in fact 12 months older than the original firmware on the device and the machine stopped working in PVR mode. Eventually I even lost the tuners after installing the Channel List from Digenius.
My request for assistance from Digenius has so far fallen on deaf ears.
Any help in getting my box up and running again would be greatly appreciated.

Cheers,
CH

Posted by on

  • Shankaram May 17, 2008

    Hi,

    This problem has finally been resolved. I telephone digenius at the contact number posted on their site and they sent me the latest firmware. The machine is now fully functional and the autotune function easily picked up the local TV/Radio free to air stations.

    I suggest that if anyone has a similar problem to contact Digenius by phone as I did not get any response to emails.



    Shankaram

  • Anonymous Feb 02, 2009

    mines a supernet 1200 120g h/d i upgraded the caps as per instructions and the voltage was all in the limits

    it worked fine for about 20 mts then went crazy lost picture and just a flickering dark screen, i'm looking to upgrade the firmware but dont know how to do do it.... Help please...Fred

×

2 Answers

Ca you

Posted on Sep 17, 2008


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers

Hello Shankaram,

I would suggest reloading the machine since it appears the 3.41 is the current software load according to this site:
http://www.digenius.de/Download_mlstr_en
Once you reload the machine attempt to reestablish the channel list by reloading it to.

I hope this helps

Thank you,

Shuttle83

Posted on May 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I cancelled my extra view do I lost the option of record and play back on my PVR


probably will . we here at FIXYA have no idea what that company does

Aug 12, 2016 | TV Receivers & DVRs

1 Answer

Why does my Humax Foxsat HDR tune to stations OK sound OK but no picture just a green screen. Any suggestions?. Worked OK till about a week ago.


This is sometimes due to the PVR not communicating properly with the TV. Try turning the TV on before the Humax.

Mar 03, 2015 | Humax TV Receivers & DVRs

1 Answer

I was watching a PVR recording and it just froze. The remote battery is fine, as I can turn the TV on and off, but I can't get our of the PVR event. any suggestions would be welcome. Not sure if I should...


Pvr programs are played back from a hard disk drive inside or attached to the receiver. You may be able to reboot the receiver and pay back the event, there may be damage to the disk drive that caused it to freeze playback. You may also have had a signal issue during recording (especially with satellite based dvrs) that caused the image to freeze.

Mar 01, 2015 | TV Receivers & DVRs

1 Answer

Zero audio no matter what I've tried. It worked fine for over a year. Blu has sound, dvd writer also has sound. PVR from Shaw, no sound. DSR530


susan_basske

I would check your cable between the receiver and TV to make sure they are secure at both ends. If this doesn't work, try unplugging the receiver from the electrical outlet for about 10 seconds. I hope this helps.

Ray Calo
DISH Network

Jan 22, 2011 | Motorola TV Receivers & DVRs

2 Answers

HOW LONGH ON AVERAGE WILL A FREEVIW BOX LAST ?


Depends on Brand, Age , Ambiant Temperature, Manufacturing Construction. Alot of them break due to heat build up inside on the power supply capacitors due to poor ventilation. I Mean a freeview box can last anywhere from 10 minutes to 4 years.

Apr 05, 2010 | Humax DRT800

2 Answers

Not even loading screen


Does the digitalbox has an inbuilt harddrive?? /David

Jul 12, 2009 | Sagem PVR 6280 Freeview DTV Receiver /...

1 Answer

Remote Control Code for Goodmans GHD8150F2 PVR


not all universal remote control work with everything, even if the product is listed.
You MUST try every code in the book and see if another company code works.

Nov 29, 2008 | TV Receivers & DVRs

2 Answers

Not getting signal


is there no auto tune option in your set?

May 02, 2008 | TV Receivers & DVRs

Not finding what you are looking for?
TV Receivers & DVRs Logo

Related Topics:

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top TV Receivers & DVRs Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68153 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a TV Receiver and DVR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...