Question about Cameras

1 Answer

Hi since last week (camera fell to the floor) the camera is not able to show the pictures on the display screen. The screen does however display pictures before it fell, so it seems the problem is in the camera and not in the screen. Help needed. Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a FujiFilm S5000 and since 2 weeks the sensor seems not to be able to adjust when trying to take a picture in sunny condition. The screen shows white and pink colour with horizontal lines. I turn...


Actually it's not the sensor it's the LCD screen. I would say in the last two weeks the camera didn't change but the environment it is being used in has and is causing the camera to overheat.
Diagram
tri3mast_192.jpg
Temperature
Diagram
tri3mast_193.jpg

Keeping the camera within these perimeters should solve your problem.

Jan 18, 2011 | Fuji FinePix S5000 Digital Camera

1 Answer

My camera samsung es65 fell in water...what should i do now....when i kept battery and turned on welcome screen came and again it vanished..when we press buttons green light was blinking but screen is not...


It may be possible to dry the camera out by leaving it in a warm dry place for a long time (like weeks). However, you may have damaged it by turning it on while it was wet.

Oct 27, 2010 | Samsung Cameras

1 Answer

Display screen no longer works while taking pictures


Sounds like they accidentally pressed the DISP or DISPLAY button on the back of the camera. This manually turns the screen on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP button one more time with the camera turned on.

Aug 01, 2009 | Canon PowerShot A630 Digital Camera

1 Answer

Cannon SD 750 - when i try to take a picture a black screen appe


Think that you accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP button one more time.

Jul 29, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

1 Answer

When I try to view my pictures on the LCD screen, the white area of the picture flashes. Last week on vacation, it would intermitenly stop taking pictures. I would have to set the lens and camera to...


Hello,

If this is the same as my Nikon this is the overexposed highlight display option.
This shows areas of the photograph that are overexposed slightly.

On my Nikon I use the up and down arrows on the back to cycle the LCD display options.
Stop when you get a display that does not flash.

As for the focus problem check if you have set the front control to AF not M, also check if the lens is set to A not M.

Jul 06, 2009 | Nikon D80 Digital Camera with 18-135mm...

2 Answers

Camera fell on the floor (carpet) and now the


Your lens may need adjusting. This info may help . Other People solved problem. Lots of Info on this link.

http://www.fixya.com/support/t102982-e_18_problem

Mar 23, 2009 | Casio Exilim EX-Z750 Digital Camera

1 Answer

My sony digital camera fell and the pictures are distorted


your lens is off by a gear or two, you need to have the lens repaired. see my solution for the W55 if you can DIY.

Jan 27, 2009 | Sony Cyber-Shot DSC-P72 Digital Camera

1 Answer

Nokia 6030 display gone.....


Try to connect to computer then try to get the contacts ..

Jan 11, 2009 | Nokia 5200 Cellular Phone

1 Answer

Canon a95 display problem black screen


Does your A95 Canon shows old pictures in card? if yes, its problem with CCD Imager in your camera and Canon has free repair scheme for this problem. Please click Canon Advisory for details.
Regards,

Sep 11, 2008 | Canon PowerShot A95 Digital Camera

4 Answers

A95 LCD screen black and unable to take photos


Its common problem in canon cameras and I have solution. please let me know if you didn't find in chat.

Sep 02, 2008 | Canon PowerShot A95 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...