To do this, press the ENTER button on the TV and the MUTE button on the remote at the same time. After 5 seconds the screen should come up and it will read "Lamp use time...Total lamp use time ....lamp reset" Press the center button on your remote (the circle button right in the middle of the four directional buttons) and you will be reset to -0- again. Your orange light should now be off.
I believe it said to reset the replacement bulb light you have to hit
enter on the tv and mute on the remote at the same time for 5 seconds,
then a menu will appear to either see how many hours you have left on
your bulb or reset the light.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Recheck the tv installation of the tv projection Lamp make sure the installation of the tv projection Lamp it is properly install and tightly and correctly connections of all wires?Yes,make sure the tv Lamp door close tightly and the latch switch closed in it proper prosition?Yes,turn the tv on,if the tv now make alot of clickings noises and the tv LED light flashes.Mean the tv Ballast board it is also dead too and must be replaced,this Ballast board only job are to ignite the tv projection only.
The projection lamp on this tv like 1 1/2 or 2 years has not been replaced in this tv and it turn on and watches tv 4 or 5 hours every day?Yes,than the projection lamp life is over.Require replacing a projection lamp.
Ur tv Projection lamp is dead.Ur tv Projection lamp,require replacing.The "LAMP"LED light indication blinking flashes or stay on.The projection lamp must be replaced,tries websites like Tvrepairworld.com,Partstore.com,Ebay.com to buy a new projection lamp.
Lamps only last for 5,000 hrs -8,000 Playing hrs
It means every hour you Play TV Lamp burns up the hours, so after 5,000hrs on most Lamp needs replacing, some Lamps dont even last this long DLPs are not like Projection you can play them 24-7 and Tubes will remain good, But Lamps are like a light bulb they all burn out after so many hours.
Best thing is to turn TV off if you are not watching it, in order to Save Hours burt on Lamp.
Mats has Lamps for $99.00 1-800-628-1118
Replace the Lamp.
First of all, there are no lamps inside this set, there are CRTs. These are not just replaced as lamps would be. The CRTs themselves will run at leas $80 each. To change these will require replacing the coolant for the CRT as well which is not a DYI type of job. The coolant is dangerous and needs to be handled carefully. Also, once a CRT is replaced, a complete mechanical and electronic convergence adjustment must be made. There is a specific order in which to do this that is outlined in the service manual and it requires a template that would need to be purchased as well.
Unless there is a specific problem that needs to be addressed, it is unlikely that any of the CRTs needs to be replaced.
If you are having a problem with the set, can you please update this with a description of the problem? We should be able to assist in the resulution of the problem with something less drastic than CRT replacement.
Sounds like a warning indicator that your lamp has reached its full viewing time( Aprox. 3000 hours) Unfortunately, whatever you are able to watch for the next couple of days will be a bonus. Try to find a replacement globe and find out how to reset the tv, so it knows that you have replaced the globe
Try resseting the lamp timer following the info below:
Procedure for resetting the KDF42WE655, KDF50WE655, KDF55WF655, KDF55XS955, KDF60WF655 or KDF60XS955 lamp timer: 1. Press the JUMP button 3 times on the remote to get to the Panel OSD mode. 2. Next press the remote channel 2 button 9 times to get to the Lamp Timer mode. 3. Press the remote 3 button, mute, then enter to reset the timer to zero.
It will take 45-50 seconds for the timer to reset. After the timer is reset you can shut the TV off. The lamp timer will remain reset (no need to save).
when you replace the lamp as soon as you power up the set it should automatically bring up the menu asking if you have replaced the lamp and would you like to resett the lamp hrs. Your problem is not with the lamp. its most likely the power pwb capacitors. You can get the repair kit at the following link with instructions. http://servicemanuals.vstore.ca/