Question about Apple iPod MA446LL/A MP3 Player

2 Answers

Die - Apple iPod MA446LL/A MP3 Player

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 268 Answers

Hi,

In this case you can try restore :

Restore

Note: Because Restore erases all of the songs and files on iPod, make sure to back up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.

How to restore your iPod:
For Windows:

1. Make sure you've reinstalled the latest version of iTunes.

2. Open iTunes, and then connect your iPod to your computer.

3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.

4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software.

The 4 possible restore options are:

Restore Option 1: Restore - Restores with same iPod Software version already on iPod.

Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.

Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.

Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.

6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started.

When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.

7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage.

Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.

8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.

For Mac:

1. Make sure you've reinstalled the latest version of iTunes.

2. Open iTunes, and then connect your iPod to your computer.

3. After a few moments, it will appear in the source list in iTunes. If the iPod's display doesn't show "Connected" or "Do not disconnect" you may need to put the iPod into disk mode to proceed.

4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.

5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:

Restore Option 1: Restore - Restores with same iPod Software version already on iPod.

Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod, even though a newer version is available.

Restore Option 3: Use Newest Version - Restores with latest iPod Software version on your computer.

Restore Option 4: Restore and Update - Restores with latest iPod Software version on your computer.

6. A message will appear prompting you to enter an administrator's name and password.

7. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.

8. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage.

Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.

9. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.

Or

Try to reinstall

To update and reinstall your iPod software, first download the latest version of iTunes.

http://www.apple.com/itunes/download/

Next, open the new version of iTunes and connect your iPod to your computer.

Select your iPod in the source list and click "Check for Update" under the Summary tab. iTunes will check to see if your iPod needs to be updated and perform the update for you.

Good Luck.

Live, Love, Laugh.

Posted on May 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 158 Answers

I think your ipod is dead. This happened to me to. I was listening to it when I arrived at my destination, and I thought I turned it off and I put it in my pocket. Later that day when I went to listen to it, it wouldn't turn on at all. Aparently, it had stayed on. Hold the pause button for five to ten seconds. The apple symbol will appear on your ipod. Immeadility put it in your docking station before it goes away. Your ipod will turn on, and itwill start charging.

I hope this helps. Please rate my solution.

I'm sorry if I sent this more than once. SORRY.

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Wat is die voor-en nadele van die gebruik van rekenaartablette in die klaskamer


Yes it will give learners more help and they will also learn how the technology is developing

Aug 01, 2014 | Tablets & eReaders

2 Answers

What is included in a die set?


A die set is a collection of equipment that can include; upper and lower die shoes, punch and die retainers, guide pins and bushings.

Jan 28, 2013 | Tools & Hardware - Others

1 Answer

Model ddr503h degage trop de chaleur en mode deshumidificateur et themosta aux minimum aux sous-sol la temperature monte a 25 degre pour 55% d humidite hord fonction le sous sol se tient a 60% d...


Omdat jy die gebruik van die luchtontvochtigers in die kelder, die lugtemperatuur op vloervlak is kouer as by skouer vlak.Dehumdifiers sukkel om te werk by temperature onder 65 grade F. Tensy, jy het 'n lae temperatuur model wat ontwerp is vir die kelder performance daarvan.Verhoging van die eenheid op 'n stewige tafel, counter top, ens, sal oor die algemeen om die probleem op te los.BNE seker die lug filter om gereeld skoon te maak.Op leats een keer elke twee weke.Ek hoop Dit het gehelp om jou en dankie vir die keuse van FixYa.

Aug 26, 2011 | Dehumidifiers

1 Answer

I have a makita jn1601 nibbler and I'm trying to change the punch. How do I do this?


Removing or installing the punch and die

Always replace the punch and die as a set.


To remove the punch and die, loosen the lock nut with the wrench.

Remove the die holder from the tool.

Use the hex wrench to loosen the bolts which secure the die. Remove the die

from the die holder.

Use the hex wrench to loosen the screw which secures

the punch.

Pull the punch out of the punch holder.


To install the punch and die, insert the punch into the

punch holder so that the notch in the punch faces toward

the screw.

Tighten the screw to secure the punch.

Install the die on the die holder.

Tighten the bolts to secure the die.

Then install the die holder on the tool so that the punch is

inserted through the hole in the die holder.

Tighten the lock nut to secure the die holder.

After replacing the punch and die, lubricate them with machine oil and run
tool as needed


Here is a link to a manual in case you need it to:

http://www.makita.ca/data/upload/tools/(JN1601)883894-943_75725_owner_English.pdf

Thanks for using FIXYA

Please rate us.

May 25, 2011 | Makita Garden

1 Answer

The valve timing on my bike i think i could have make a valve "seer"? jammer vir die afrikaans...... die bike swaai en klink asof hy gaan start maar dan nie....... ek al moedeloos gesukkel asb...


Jy kan net 'n klep seer maak as 'n belt/ketting gebreek het en tie piston het die klep getref. Kry die enjin in die posisie waar die kleppe albei toe moet wees en blaas dan druk lug in die vonk prop gat. Jy sal gou hoor of sien of daar 'n klep lek.

Ek sal meer geneig wees om te se dat jy 'n probleem met die vergasser het, iets sit vas, vuilgoed of 'n verstelling. Kry 'n blik QuikStart en blas daarvan in die inlaat en kyk of dit die enjing vir 'n ruk sal laat loop. Kom terug na my toe as jy nog nie reg kom nie.

Apr 19, 2011 | 1993 Yamaha FZR 1000

2 Answers

Schommeling temperatuur bij statoner als ik bij stilstand de moter sneller dus gas geef laat draaien dan zakt de temperatuur weer.


english or spanish please ,sorry no german ,i am assuming that you mean the temperature is rising when stationary ,so the cooling fan isnt working which could be a sensor or a fuse but i would need more details

Aug 02, 2010 | 2008 Chrysler Pt Cruiser

1 Answer

Cannot use die cuts


No I don't think your machine is defective. Here are some "sandwich" ideas to help you. I know you asked just for Cuttlebug dies; I included other "sandwiches" that you can do with your Cuttlebug. If you need further assistance feel free to contact me.


Cardstock
Chipboard
Magnetic/ Metal Sheets & Thin cork (Media)

Cuttlebug Dies
Plate “A”, Plate “B”, Die (cutting side up), Cardstock, Plate “B”
Plate “A”, Plate “B”, Die (cutting side up), Chipboard, Plate “B”
Plate “A”, Plate “B”, die (cutting side up), Media, Plate “B”

Cuttlebug Embossing Folders
Plate “A”, Plate “B”, Folder (with cardstock inside), Plate “B”
Plate “A”, Plate “B”, Folder (with chipboard inside), Plate “B”
Plate “A”, Plate “B”, Folder (with metal sheet inside), Plate “B”
Nestabilities
You will need Spellbinders Tan Embossing Mat to emboss in
Cuttlebug™ machine (or a plumbers gasket cut to size, or some use a mouse pad)
Cutting Sandwich - (Stack from bottom up)
1. A plate
2. C plate
3. Spellbinders Die (cutting side up) that means the side with the
ridges
4. paper or cardstock
5. B plate
6. Run through Cuttlebug™ machine.

Embossing Sandwich- (Stack from bottom up)
*Remove C Plate for embossing sandwich
1. Place A plate on bottom
2. Leave die face up on A plate with die cut still in the die.
3. Place one Spellbinders Tan Embossing Mat on top of the die.
4. Use 2 or 3 pieces of cardstock to shim.
*Cautionary Note: Using more than 3 pieces of cardstock to
shim Cuttlebug Embossing sandwich will result in B Plate
breakage. When using Spellbinders Edgeabilities card making
dies, shim with only 2 pieces of card stock.
5. Place two acrylic B plates on top of sandwich and run thru
Cuttlebug machine to emboss Spellbinders die cuts.
6. Turn die over and use like a stencil with inks and chalks for
added detail.

BigShot Embossing Folders
Plate “A”, Plate “B”, Folder (with cardstock inside), Plate “B”, Cardstock shim

BigShot Large Dies
Plate “B”, Cardstock, Die (cutting side down), Plate “B”

Revolution Dies
Plate “A”, Plate “C”, Die, Cardstock, Plate “B”

Sizzlit Dies
Plate “A”, Plate “B”, Die (cutting side up), Cardstock, Plate “B”
Note: Provocraft suggests using Plate” C” instead of the second Plate “B”, however, CB owners have cracked plates, so try with two “B” plates first.

Sizzix Original Dies & other Steel Rule Dies
Plate “B”, Cardstock, Die (cutting side down), Plate “B”
Plate “B”, Chipboard, Die (cutting side down), Plate “B”

Sizzix CutNFold Dies
Plate “A”, Die, Cardstock, Plate “B”, Chipboard shim
Also try:
Plate “B”, Cardstock, Die, Chipboard shim (maybe 6 layers)

Sizzix Embossing Folders aka Simple Impressions
Plate “A”, Plate “B”, Folder (with cardstock inside), Plate “B”
Also try:
Plate “A”, Chipboard shims, Folder (with cardstock inside), Plate “B”

QuicKuts Dies (Regular)
Plate “A”, Plate “B”, Die, Cardstock, Plate “C”
Plate “A”, Plate “C”, Die (cutting side up), Chipboard, Cardstock shim, Plate “B”

QuicKuts Dies (Grand)
Plate “A”, Plate “B”, Die, Cardstock, Plate “C”

Brass Embossing Stencils
Plate “A”, Plate “B”, , Brass stencil ,paper/cardstock,mouse pad (cut to size, rubber side down), Plate “B”
Sandwich may need to pass through several times based on cardstock thickness
Or use plumber’s black rubber plus red rubber gasket, instead of mouse, then add last plate B.

Big Impressions Texture Plates
Plate “A”, BI texture Plate, Cardstock, Silicone Rubber pad (from BISK), Impressions Pad (from BISK)
*BISK-Big Impressions Starter Kit

Fiskars Texture Plates
Plate “A”, Fiskars texture Plate, Cardstock, tan Wizard pad, black or tan Wizard pad, (possible Cardstock shim,) Plate “B”
Also try:
Plate “A”, Fiskars texture Plate, Cardstock (lightly misted with water), 2 layers Fun Foam, Chipboard Shim, Plate “C”
Also try:
Plate “A”, Fiskars texture Plate, Cardstock (right side towards TP), Rubber Plate (made from Plumber’s rubber gasket), Plate “C”

Plastic thin stencils
Plate “A”, Plate “B”, , Brass stencil ,paper/cardstock,mouse pad (cut to size, rubber side down), Plate “B”
Here too- may try
Plate “A”, Plate “B”, , plastic stencil, cardstock, black rubber, red rubber, plate B


Jan 28, 2010 | Provo Craft Cricut Disney Font Cartridge

1 Answer

Fritz!BOX fon WLAN 7170


DHCP und FritzBox gibt öfters Probleme.
Ich würde eher meine Drucker auf DHCP umstellen als den Rest der PCs und die Fritzbox.
Bei HP - Druckern kann man das via InternetExplorer ändern.
DHCP vergibt zwar die IP´s automatisch, aber nicht dauernd neu.
Erst wenn die maximale Anzahl an Geräten erreicht ist oder ein komplettes Reset gemacht wird.
In meinem Netzwerk laufen 5 Rechner und 3 Drucker, verbunden über einen SMC - Switch, alles über DHCP. Geht problemlos.

übrigens: das ist ein englischsprachiges Forum, da kann eine Frage auf Deutsch länger bis zur Beantwortung brauchen :)

Aug 18, 2008 | AVM Computers & Internet

3 Answers

Amilo D 7820


Om die HDD te verander jy moet die cd-Rom uithaal (trek die clip met a pic van a lock na oop toe) en dan kan jy die cd-Rom uithaal. As jy dit doen dan kan jy die HDD sien. Vat die 4 screws uit en trek hom stadig uit. Moenie vergeet om die nuwe HDD op "master " te sit.

Oct 16, 2007 | Fujitsu AMILO D-7820 Notebook

Not finding what you are looking for?
Apple iPod MA446LL/A MP3 Player Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

kakima

Level 3 Expert

102366 Answers

TO Lady

Level 3 Expert

638 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...