Question about Televison & Video

2 Answers

No power i couldn't do it and i took it to the shop and the guy wants 220 to fix it what can i do i can't pay that much . can i send you the board and can you help me out?

Posted by on

  • 1 more comment 
  • monas May 09, 2008

    will you want the power board or all the tv and where is going?

  • monas May 13, 2008

    i have take it off i will take a pic an post it you let me know i live in oakland ca and i will send it from here . thank you for you help

    angeles

  • monas May 15, 2008

    the pics are bad i better send u the board let me know how?

    thanks angeles

×

2 Answers

I got some pics but they are really hard to see the little pices i guess i better send you the board . let me know how we can do it .
thanks for you help angeles

Posted on May 15, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 367 Answers

Does the board have bulged tops on the can shaped items?If you are willing to pay the shipping both ways,I will do my very best to try to fix it for you.If I can,how does $50 sound?Please let me know.Thank You very much!

Tyler

Posted on May 09, 2008

  • 1 more comment 
  • Tyler Bearor May 10, 2008


    If you can get the power board out yourself,it would be alot less money to ship it both ways then the whole TV.Where are you from?I'm from Madison,Maine.I shipped one just like yours to Ohio,and it cost me around $40 UPS for the whole TV with the stand.Have you taken the back off the TV yet?If so,please look at the power board,and let me know if any of the can shaped items look bulged out on the tops of them.Thank You very much!

    Tyler

  • Tyler Bearor May 15, 2008


    How are you making out with the picture?Please let me know.Thank You very much!

    Tyler

  • Tyler Bearor May 18, 2008


    Please send the power board to the following address,and I will see what I can do to fix it.You should be able to mail it through the US Postal Service fairly cheap.Thank You very much!



    Tyler

    Tyler Bearor

    29 Towne Road

    Madison,Maine

    04950



    (207) 696-5005

    jbearor@verizon.net

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Takes 40 minutes to power on my ln40a550p3fxa


have the same problem it is the main board but no one will post the fix. It can't be that hard to fix! Have a BN94-022079A its similar to your board looks the same and has the same problems. Anyone willing to post the fix for this board. Theres some guy on ebay fixing them for 75 bucks, you send your board in they do the repairs and ship it back

Feb 26, 2013 | Samsung LN40A550 LCD TV

Tip

RCA Pro Scan PS52650 fix and price (no power)


No power and won't turn on. I had some indications with TV occasionally going on and off and tricking it with remote (by holding power button for longer periods of time) to turn it back on.
Unplugging
it and leaving it over night then plugging it back in heard three clicks at the back and nothing after that. Doesn't start.
Finally took it to the repair shop and it's power board and it will cost in a range of $300 CAD.
Hopefully this will help some of you guys.

on Jan 22, 2010 | Televison & Video

1 Answer

I have an element TV with a MLT070A power supply board. I'm not an electrical guy, but a technician came out and showed me the bulged caps and said that was what's wrong with the TV. He said he...


Hello,

power supply board is dead, if you know basic electronics' and soldering you can handle it ? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.

Good luck in solving the problem.....

May 17, 2011 | Televison & Video

2 Answers

My 4 year old 26" Samsung hd tv whistles constantly when on stand by - it is ok when actually on and ideas?


Usually the singing ir whistleing you hear is a capacitor. Usually the ones that go are in the power dection or high voltage as they get worked harder.

They can be easily fixed but you have to identify them first. Your repair shop may be able to figure out which one by the sound. The other way is to actually let it go pop. then they are rather obvious.

What I would suggest is to call a few repair shops and see if they want to track it down when its singing or if they want to wait till it goes out. Sometimes this can take a bit longer to find so they don;t want to spend the time. As well get an estimate before getting it fixed. Know what a replacement is worth just in case. This should be a cheap(ish) fix but depends on what goes out.

So it should be safe until it goes out but may cost more to fix if you let it go as it could do more damage.Or it may cost a bit more to fix if they have trouble finding it. So its one of those can't win for loosin problems. If your repair guy is sharp I'd take it in as soon as I could but wouldn;t worry too much if I couldn;t.

Jun 26, 2010 | Samsung LN26C450 26 in. TV

2 Answers

Clicks on and off repeatedly. brought to repair shop. $569 to replace main power board. is this reasonable


Hahaha, this is MOST CERTAINLY not reasonable.

There are companies who specialize in fixing power supplies and the basic rate of the one I last used was $150.

But frankly, even $150-$180 is too much for that.

Feel free to send me your broken power board and I'll have it fixed for under $200 even if I have to replace most active components on it without even knowing which one is to blame :-)

What's more serious, though, and this is for everyone reading this reply, is this: some repair shopes APPARENTLY have no clue what are they talking about. While in this case they might be right - the problem may indeed be in the power board, just yesterday I had a customer in a very similar situation to yours and he was quoted $650 for a problem that was MOST CERTAINLY not the power board, but a sustain board in a plasma television.

So beware people of self-pronounced or flat out fraud TV repair shops!

Back to your question, if the power board is indeed what's at fault, what you need is part number 1P-271135A and whis is what I found for you through Google:

http://toronto.kijiji.ca/c-buy-and-sell-electronics-Samsung-LCD-LN46A550-Power-Supply-board-1P-271135A-W0QQAdIdZ185557461

I am in no way associated with seller, have no clue if he would ship to US, if he;s reliable etc. Feel free to do your own Google search.

But, for God's sake, do not pay $500 for a power board!

Bobby
www.coppelltvrepair.com

Mar 24, 2010 | Samsung LN46A500 46 in. TV

1 Answer

I just bought a 42 inch LG Plasma flat screen at the thrift store in hopes of fixing it. I paid $30 for it. The screen is in perfect condition-no scratches or cracks. It was being sold "as is" for parts....


These tvs have major design plaw in power supply board.It burn alot capcitors,check the power board for capacitors for bulge up or bust open.U have tech.skill.Know how to solders?Replaced these capacitors should solved power problems.U can tries these websites Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Mar 10, 2010 | LG 42PC3DV 42 in. Plasma EDTV

1 Answer

HI HAVE A FLM-2632 THAT ALL OF THE SUDDEN LOST


If it's still under warranty the TV Service Shop will fix it for free if they are a qualified Polaroid servicer. If not I believe you are having problems with the power supply board not sending the Audio board the right voltage. Could be the Audio board itself. A Good TV Service Shop should be able to fix it. May cost you between $100 to 200 for the repair.
Blessings,
A/V Media Tech Guy

Jul 20, 2009 | Polaroid FLM-2632 Television

10 Answers

Panasonic th-42pz77u 42ed


Pin 93 of the MPU IC9003 monitors the status of the SC, SU, SD board. During normal operation, the photo-coupler PC6480 outputs a low to pin 93. If the SC, SU, or SD board becomes defective, a high is provided to pin 93. As a result, the unit shuts down and the power LED blinks 7 times.

Jan 07, 2008 | Panasonic TH-42PD50U 42 in. Plasma EDTV

1 Answer

Norcent model 2723 lcd tv


if u can resolder urself with a pencil solder and there are products to remove that resin u said u could get all that at a radio shack beats the hell out of paying 350 u could do it urself like around for 20 bucks just make sure ur power is out of the wall before anything

Nov 03, 2007 | Vizio P4221 Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...