Question about AOC CT720G 17" CRT Monitor

1 Answer

Problem in AOC 17

What's wrong with the monitor when turned on the computer, the computer boots up (It booted up to Windows XP Cause i heard it through the speaker) but the monitor stays in the orange light state, how can i solve this problem

Posted by on

  • Glenn Rogers
    Glenn Rogers May 11, 2010

    Is the cable connected securly to the PC and if you have two connectors, to the right one?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

Your second step in troubleshooting this problem (after you check the connections) is to plug in another monitor to your computer. If you are having the same problem it is related to your computer. If the second monitor works fine then your original monitor is probably shot.

Posted on May 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AOC 917sw starts normally then goes black after a few seconds?


More than likely, you have set the resolution too high for the monitors capabilities. Set the computer to a lower resolution, and try again. If using windows, try to boot in safe mode to accomplish this. Other OS's can take variables at boot also to do the same. You'll have to search for yours.

Good luck.

Bruce

Jun 08, 2014 | Samsung SyncMaster 712N 17" Flat Panel LCD...

1 Answer

When I boot up my PC the monitor will blink the windows logo and sign on for a second then go black....if I turn off the power button on the monitor and pust it back in the monitor will again blink the...


Could be the resolution too high for the monitor.
Try to press "F8" during the "Starting Windows" message, then select the safe mode or VGA mode.
After logging in check the resolution and if needed reduce it.

Could be also a video driver problem.

Use the same "F8" trick to get to the safe mode and reinstall the video driver.

I hope this will give you some ideas

Apr 05, 2011 | AOC LM729 17" LCD Monitor

1 Answer

My AOC screen goes black after about a few seconds after booting.


Hello,

The picture board on your monitor is bad, since it goes off after few seconds and the power led or button is on, it means the picture board of your monitor has developed fault.

The best thing for you to do now is to take the monitor to a local repairer or service center within your vicinity to help with the replacement of the picture board because the fault is not something you can fix yourself, in order not to complicate issues.

Take care.

Jul 26, 2010 | AOC LM729 17" LCD Monitor

3 Answers

I have aoc monitor the problem is out of range


Describe your AOC S7M51, 17 in. CRT Monitor Problem. with external TV Tuner card connected, Message shows "Warning, Not Support, Out of range" and with CPU connected, the same message shows from the booting... ??? are AOC monitors trusted for the efficiency ?

Dec 04, 2009 | AOC CT720G 17" CRT Monitor

1 Answer

Monitor colour goes pink


The monitor needs to be repaired or replaced, with the low prices today you could pick up a nice LCD monitor.

Sep 16, 2009 | AOC CT720G 17" CRT Monitor

1 Answer

No display on AOC 17" CRT Monitor


My AOC 17" flat monitor (model number P7S80) is not displaying properly. Only 80% of monitor is displaying and the edges at the bottom are tapered of. If somebody is having a solution please post it.

Sep 07, 2009 | AOC CT720G 17" CRT Monitor

1 Answer

"Not support Out of range"


You have to boot your PC in safe mode using press F8 key.
after that you decrease the resolution in the display setting section.

It will help you.

Nov 29, 2008 | AOC CT720G 17" CRT Monitor

1 Answer

Using CRT monitor


try back to other machine again.

Apr 22, 2008 | Dell E176FP 17" LCD Monitor

2 Answers

BenQ FP7IB LCD monitor, turn black aftr BenQ logo


Try to plug into another computer and wait to see.
If it turn up to be same it somewhere defect from the main board of the lcd.
If if not the same turn up to be, you should reinstall the OS because the software is corrupted or your display card problem.

Apr 16, 2008 | MPC Computers AOC 7F 17" CRT Monitor

Not finding what you are looking for?
AOC CT720G 17" CRT Monitor Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top AOC Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

kakima

Level 3 Expert

98694 Answers

Are you an AOC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...