Question about Philips Magnavox Learning Universal Remote

1 Answer

Needed: Code finding procedure for universal TV Controller by Philips

How to have my six-device universal Philips remote control find the correct code for my TV....
I lost the instructions, but it worked fine until the batteries died, and I did not replace them in time..
Thanks, Peter Whalespotter.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found the instructions that came with the remote control when I bought it. It was easy to fix, and now it works again.
Thanks for offering ur help; if anything else comes up, where I will ned expertise, I shall certainly ask for ur help.
Thanks. P.

Posted on May 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the code for programming universal remote for philips 19 in tv model 19PFL3504D/F7


How To Program A Philips Universal Remote ' Codes For ...

codesforuniversalremotes.com/program-philips-universal-remote/
Here is how to Program any Philips Universal Remote Control. Turn on the device you ... Remote Control Codes December 21, 2015 at 1:19 pm. Stephanie,

Codes For Universal Remotes ' Universal Remote Control ...

codesforuniversalremotes.com/
Universal Remote Control Codes For TV & Audio. ... Codes for Philips Universal Remotes · Sanyo TV Codes for Universal Remotes · Codes for .... I have an 19 inch Emerson flat screen and a RCA universal remote. Please help with the code ..

Dec 28, 2015 | Philips Televison & Video

1 Answer

What are 3 digit code for Philips tv using chunghop rm 90 universal remote


Chunghop remote control have no set-up code to Philips Tv. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

Dec 03, 2015 | Philips Televison & Video

1 Answer

Need codes for chunghop rm 33e universal remote in a Philips tv


This remote control have no set-up code to Philips brand TV. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

Oct 26, 2015 | Philips Televison & Video

1 Answer

Can I program my Sony DVD remote to my Philips TV? Its a Philips flat screen TV.


Sony DVD remote have no set-up code to Philips brand TVs. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability.
Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

May 15, 2015 | Philips Televison & Video

1 Answer

Wich is the code number from my Philips tv in remote control sonaki EV-RM9523


This remote control have no set-up code to Philips TV.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability.
Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Feb 12, 2015 | Philips Televison & Video

1 Answer

I have a Philips CL043 universal remote. I can't find th tv code for a Westinghouse lcd tv.. can you help?


You can find codes for the remote here: http://www.urc.philips.com/ . Then look up the CL043 and click on the remote code finder. This is also called the SRU3004WM by Philips.

A Westinghouse TV should responds to one of the following codes: 0915, 0013, 1216, 0300 if the TV was released 6 months before the remote was programmed or earlier. (Whte Westinghouse codes are different.)

If those codes do not work, there is a manual code search option. With the TV on, press and hold Setup on the remote until the red indicator stays lit. Then press and release quickly the TV button on the remote (the LED will blink once). Then press the Channel Up button until the TV responds (up to 300 times). If you overshoot, press Channel Down to go back to the previous code. Press and release the Mute button to set the code. Check if the remote performs all the needed functions. If it doesn't, repeat the above steps to find another code.

I hope this helps.

Cindy Wells
(if the remote is older than the TV, you may need a newer universal remote.)

Jan 08, 2011 | Philips 5-Device Universal Learning Remote...

2 Answers

I am using a Philips SRU3003WM/17 Universal Remote with my Sylvania TV Model number 64119E. When programming the remote some strange numbers appeared on the screen and now I cannot get them off. The...


Hi there,

Well your Philips universal remote control comes with a list of codes for devices by brand name.
Find the first code for the brand name and type of device you wish to program. Turn all of your devices off, and then manually turn on the device you want to program.
Press the Setup button on your the universal remote and continue to hold it down until the indicator light stops flashing and remains solid. Release the Setup button. Press the Mode button for the type of device you want to program on your Philips universal remote, such as the TV.Release it immediately and make sure the indicator light is illuminated. Enter the first possible four-digit code on the universal remote, and then press another button on the remote to see if the device is now programmed, such as the volume control or power button. If the device responds, you have successfully programmed your Philips universal remote. If not, turn the device off and back on and follow the steps again using the next code on the list. Repeat until the device successfully responds.

If your TV code is not listed on the manual then you can use the Remote Using Code Search Option -
Your Philips universal remote has a built-in code search feature that will find the correct code for your device. This process may take longer than using direct code entry, but can be helpful if you do not have access to the code list or if the brand for your device is not listed.

Make sure all of your devices are turned off, and then manually turn on the first device. Press the Code Search button and hold it down until the red indicator light stays illuminated. Press the Mode button for the type of device you want to program on your Philips universal remote, such as the TV button.  Release it immediately and make sure the indicator light is illuminated. Press either the Channel button until the device responds. You may have to press the button up to 300 times. Each time you press the button, the Philips universal remote tries a new code. When the code works, press the Mute button on the Philips universal remote and the code will be stored.

I thing you wrongly do the second option that creates the problem. No issue, if your tv code not listed on the manuals then you can go with the second (code search) solution. Please post comments for further help or information.........

Good Luck!!

Thanks

Jul 31, 2010 | Televison & Video

1 Answer

JUST BOUGHT AN OPEN BOX TOSHIBA T.V. MODEL #26LV61OU LCD-HD AND IT DIDN'T HAVE A REMOTE. IT'S WORKING WITH MY VERIZON FIOS BUT I CAN'T CONTROL THE SOUND. WHAT TYPE OF REMOTE SHOULD I GET FOR THIS T.V. AND...


The remote that came with your Verizon FIOS can be programmed to control the sound on your TV. There are four different remotes can come with Verizon FIOS, and there are three different procedures to program them. I will give you all three to print out try to fix your remote control problem.

Does your remote look like either of these two?

316d5d4.gif 050b5d7.gif

If so you have a Philips universal remote. Here are the steps to find the code that will control the sound on your TV:

1) Turn on the device you want to program into your remote, for example if you are programming your remote to control your TV, then turn on the TV.

2) Press and hold the device button for the device you turned on in step 1 (DVD, AUX, TV, STB) and press OK. Release both buttons. The mode buttons blink twice.

3) Press 922.

4) Point the remote control toward the device you are setting up and press the upper part of the Play button.

5) Press the Fast Forward button. If the device you are setting up does not turn off, keep pressing the Fast Forward button until the device powers off. (You can use the Rewind button to go back, if necessary.)

6) When the device powers off then you've found the correct code for that device. Press OK to assign the code in your remote control.

Note:
There are over 200 possible combinations for TV and DVD codes. The most common codes are tried first but you may still need to press the Fast Forward or Rewind buttons over 200 times to find the correct code for your device.

If you reach the end of the list of codes, the entire remote flashes twice and returns to normal operation. You can exit programming at any time by pressing the Exit button.


Does your remote look like this?

6511892.gif

If so, your have a Motorola universal remote. These are the steps to find the correct code to control your tv:

  1. Turn on the device you want to program into your remote, for example if you are programming your remote to control your TV, then turn on the TV.


  2. Note: The DVD/VCR button can control a DVD, VCR, or a combination TV/DVD, TV/VCR, or TV/DVD/VCR.

  3. Press and hold for six seconds the device button for the device you turned on in step 1 (AUDIO, DVD/VCR, TV, CABLE).


  4. The lights for each device button light up and the light for the device button you selected remains on.

  5. Press the Power button on your remote.


  6. The device button blinks three times then turns off.

  7. Press the Up arrow button (this is the button directly above the OK button, not the Page Up button).


  8. Did the device turn off?
    Yes: Congratulations! You've found the correct code for that device. Press OK to store the code in your remote control.
    No: Repeat step 3 and 4 until your device turns off, then press OK to store the code in the remote control.

    Note: To retry the previous code, press the Down arrow button (not the Page Down Arrow button).


Does your remote look like this?

c547a4c.gif

If so, you have a Scientific-Atlanta universal remote. Here is how to find the control codes for your TV:

  1. Turn on the device you want to program into your remote, for example if you are programming your remote to control your TV, then turn on the TV.


  2. Press and hold the Select button while also pressing the device button for the device you turned on in step 1 (AUX, DVD, VCR, TV, CBL) until the device button blinks twice.


  3. Press 991.


  4. The mode button blinks twice.

  5. Point the remote control toward the device you are setting up and press the Play button.


  6. The remote control tests each code in its library. The mode button blinks once each time the remote transmits a new code. When the last code is reached, the mode button blinks twice.

  7. When the device powers off, press the Select button.


  8. Verify the new code is correct by pressing the Power button.

    Did the device power on again?
    Yes: Press Select to assign the code in your remote control.
    No: Turn the device on and press the Channel Up or Channel Down button to step forward or back to the correct code. When the device turns off, press Select to assign the code.
___________

One of those three should work for you.
Hope that helps.

Oct 02, 2009 | One For All URC-3021 Remote Control

2 Answers

Programme actor 10in1 urc


Philips codes:003,026,027046,073,113,115,155,191,192,193,194,223,266,230,242Sharp codes:044,054,119,124,196,198,225,2271)Press SET key and hold it.Then press the device key you want , eg TV12)The LED will be on. Release the keys3)Enter the 3 digit code of your device.If it is correct , the LED will be off.If not , the LED will blink. (read on bellow)4)Try if the keys work.If not find other code , and repeat steps 1-4

Feb 21, 2009 | Sharp Televison & Video

1 Answer

Universal Remote not working


With nearly all brands of universal remote control, there is usually more than one code for Philips. Keep going through the codes until you find one that works correctly.

So if you know that the 1st code doesn't work, then don't save it, and move to the next.

You may find that several codes will actually put the TV into standby, but other functions will be different.

Mar 12, 2008 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Philips Magnavox Learning Universal Remote Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73474 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Jaime Hernandez

Level 3 Expert

2311 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...