Question about Car Audio Receivers

1 Answer

Wiring for cass.radio

I nee to know what color coded wires go to for a 2000 plymouth voyager factory cassette radio part number P56038933AB serial number T 93 AH 235 9 C3213

Posted by on

  • Anonymous Mar 25, 2014

    please need color code

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect a kenwood krc 394 radio cassette,+ve battery, eth, and speaker connections.


Head unit color code:

12V-Yellow
12V switched-Red
Ground-Black
Illumination or Dimmer-Orange/Orange w/white stripe
Blue-Power Antenna
Blue wwhite stripe-Amp turn on

Whites-FL speaker
Greys-FR speaker
Greens-RL speaker
Purples-RR speaker
(Black stripes negative)

If you have a female harness to connect to the veicle side you will pretty much color match. The only exception is that you may only have an amp turn on wire but only a power antenna on the vehicle. In this case you would connect blue w/white stripe wire from radio harness to the blue antenna wire on the vehicle side.

If you are doing a hardwire (factory plug has been cut off) you can obtain a wiring code for your vehicle at www.the12volt.com for most vehicles.

Jun 06, 2010 | Kenwood KRC-394 Cassette Player

1 Answer

Had to buy a replacement factory radio for my 2000 toyota celica gts. I did not get the anti-theft code with the new radio. I have it in front of me. Is there anyway to get the code based on the radio...


you can get the code with the radio serial number and only from the dealer, is this car in the us ?
1998 to 2004 toyota celicas in the US don't have radio codes

Mar 31, 2010 | Car Audio Receivers

1 Answer

My car radio locked after disconnecting the battery. entered wrong codes 3 times- now off. How do I get the ''off'' reset? Where can I get the reset code? Infinity 4 cd and cassett player in 2001...


Don't worry - you'll get 3 more chances in a couple days or so. If that is the factory radio and you know where the car was purchased, you can call the dealership and give them whatever info they ask for (your name, vehicle VIN, etc.) They should be able to look up the reset code in their computer system and give it to you. If it is the factory radio but you don't know what dealership sold it, you must remove the radio and look at the serial number. They may require you to bring the car in to the service department to do this and charge you a hundred bucks. If that's the case, think about upgrading.

Dec 10, 2009 | Car Audio Receivers

1 Answer

I am trying to make use of a 1993 Mitsubishi radio from a 93 Plymouth Colt. The color code I have from an electronics store and what is posted on the internet do not jibe with the wires coming out of the...


best bet , find out where to buy whats called a "free harness" it plugs into youre factory cars radio plug if its intact , then theres wires that are actually marked in silver lettering for power , ground , switched and speakers .ect sounds like youre having a mixed color prooblem cause of the different cars /radio .years of them .if all else fails break out the multimeter

Nov 20, 2009 | Car Audio Receivers

3 Answers

NEED A WIRING DIAGRAM FOR A PIONEER DEH-1800


yellow- 12volt
red- Ignition
black- ground
blue/white- remote (amp turn-on)
white and white/black- front left
gray and gray/black- front right
green and green/black- rear left
purple and purple/black- rear right

Black stripes are negative.

Aug 07, 2009 | Pioneer DEH-1800 CD Player

1 Answer

Its Radio from my junked 2000 dodge - I need to know pin inputs


yes it wil if you dont know the circuit layer of the radio wiring

Jun 25, 2009 | Kenwood KDC-MP235 CD Player

2 Answers

Wiring color meaning


did you buy a factory radio connector to connect the old harness to the new radio wiring if not you can get one at wall mart for 20 dollars and it will be color coded

Mar 08, 2009 | Sony XPLOD CDX-GT200 CD Player

1 Answer

How do i connect the wires to put in new cd player in 95 aurora


ok you nee d to go to walmart or your closest car audio center and purchase the wiring kit for your year model vehicle the kit will have the plugs to plug into your factory harness do not cut your wires these plugs will have the wires labeled wire them to your new radio and it should plug in and play you may also need to aquire a face kit for mountring the sterio

Mar 01, 2009 | Dual XD-7500 CD Player

1 Answer

Chrysler Part No. P56038933AB Radio Wire Color code


1982 to 2001 wiring harness color code Chrysler.

12V constant pink or pink/white stripe
12V accessory red/white stripe
Antenna/Amp turn on white
12V Illumination black/yellow stripe
Left front + dark green
Left front - brown/red stripe
Right front + purple
Right front - blue/red stripe
Left rear + brown/blue stripe
Left rear - brown/yellow stripe
Right rear + blue/ orange stripe
Right rear - blue/white stripe

there is no ground wire in the harness, the metal braided strap is the ground.
use a ring terminal,speed clip, and screw to attach the ground wire from new radio
when replacing infinity radios and speakers, there are 4 wires instead of 2 at the speaker plug. the large gauge blue and black wires are the power supply for the amp, the other 2 are signal wires from the deck and will match up to the wire color codes above. simply cap off the power and ground and use the other 2 for speaker leads.

One thing i hate to see is someone who just hacks off the plugs behind the radio because they are too cheap/lazy/dumb to buy a wire harness adapter for the nice new aftermarket deck they just bought. ive seen everything from masking tape to house wire nuts used to connect wires, and they never last.
there is only 1 reliable permanent way to connect wires together - SOLDER AND SHRINK WRAP!!! whether you're connecting wiring for a radio, fog lights,repairing a cut wire, etc solder those wires, you'll be glad you did when you never have a problem with that circuit again.

This is a listing for part #'s for dash kits wire harness adapters
all part numbers are metra unless otherwise noted
dash kit 99-6700, 99-6701 and 99-6500 will work for most cars
wire harness adapter 70-1817
reverse harness( to replace factory plug that have been cut off) 71-1817
speaker adapter plugs 72-6510, non amped 72-6513 when equiped w infinity system and bypassing fact amps

no antenna adapters are required until you hit 2002 model year.
beginning in 2005 chrysler switched to a high speed LAN system in all its cars and trucks. there is no longer a switched ignition lead in the harness.
Good Luck
Leadispenser

Aug 25, 2008 | Kenwood KDC-MP235 CD Player

2 Answers

Plymouth voyager


Hi Marlon,

Not a whole I can do to help. What I can do is refer you to go get a Chilton, or Haynes manual thac voers your Plymouth Voyager. They have schematics with wire colors labeled.You will have a good shot at figuring out which wire is which.

Nov 24, 2007 | Car Audio Receivers

Not finding what you are looking for?
Car Audio Receivers Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...