Question about Sony Playstation 3 (PS3) Console

1 Answer

I get an error message when I try to setup my network account.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 472 Answers

Hi,

  1. After your inital setup of your PS3 your going to want to get online and play against some real people! So start out by going to your PS3 dashboard with all the menus.
  2. Go to the Icon on the left that says "Settings" and go down to "Network Settings"
  3. From here you can setup your internet connection automatically by letting the PS3 scan for Local Area Connections. I used a wireless set up.
  4. Once its done scanning for a wireless signal there should be a profile associated with your router, the same router you use to get on the internet on your home computer. Click on the profile, for me its my families last name.
  5. Now you must put in your Routers Password or WEP. This was giving to you by your Internet Service Provider when you set your internet up, so if you don't know it call them and find out!
  6. After this the PS3 should scan and complete setting up the internet connection. Now you must create an account on PlayStation Network.
  7. Go to the PS3's main dashboard and head all the way to the left under the icon "Users".
  8. Go down to "Create New User". Here you will think of a name that can be associated with you. Provide your email address that will be linked to this account and put in your information as it asks and thats it!
Note : If for any reason you are unable to connect to the network than it means the network key you are putting in is incorrect or may be the wireless settings are not correct. May be, you were able to connect earlier but then the settings can change and you will have to change the router settings again, which will fix the issue. It is easy, try it!
Good Luck!

Posted on Aug 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Error Code OxFFFFFE70 fixing


since we have no idea what machine has this code we cannot answer this question.

May 08, 2017 | Office Equipment & Supplies

1 Answer

I got an unsucessful error message while trying to set up my network


just a quick question

what is the error message and what happens when you try to setup your network any details you have will make it easier to help diagnose the problem and will be able to give more help to how to sort your issue

Oct 01, 2010 | Computers & Internet

1 Answer

I can't login to my account, and message till me that Your account was recently accessed from a location we're not familiar with, and when i try to verify i get error message that An error occurred while...


If you used a proxy to access facebook. You will definitely receive that message it was accessed from a different place.

Proxy servers are based in different parts of the world. Facebook temporarily disables an account if it noticed that it was accessed from a far away place(e.g. outside of the country).

You can reactivate your account by following simple steps on the page that tells you that your account was accessed from a different place.

Sep 08, 2010 | Facebook Social Network

1 Answer

I have problems to set up my email account in my motorola q everytima that I try to do it i receveid a message sayind that i have to contact my network aministrator


First you need to setup your network profile from messaging. Motorrola are designed to match pre-fix operator. You can override them by getting short tips over "Google search "

try to find how to setup email account in motorolla q in google, you will get heaps of reply


let me know buddy if this can help you.

Regards
Marshal
Dhaka, Bangladesh
bdman2010@hotmail.com

May 20, 2010 | Motorola Mobility Q

1 Answer

We cannot scan to email from our Sharp AR-M237 Multi-function "Error[973]: Incorrect format for Primary SMTP Server." I am using all the settings for SMTP that I use everywhere else. HELP?-pjm


Model AR-M257 - I have several Sharp MFP devices at different locations and all are set up to scan through our email server using a special account I have just for this purpose. I have all of them setup using the external IP address of our Exchange server (not its name or FQDN) and I have firewall rules setup to allow SMTP from the WAN IP addresses of our different offices to the LAN IP address of the Exchange server. It worked at all the others but this one. I was getting the following error when trying to send a status message (under Log) from the device to my email account as a test: [error 973] incorrect format for primary smtp server. And when I tried to scan through our email server I would get "network error". However, a connection test succeeded. I had everything set correctly for SMTP and DNS but as I was trying anything I could to get it working I went to mDNS under Services and it was enabled. I disabled it and then I could get a status message to be sent to me and we could send a scan through our email server.

Apr 12, 2010 | Sharp AR-BC260 Color Copier

2 Answers

Can't access my facebook account..Need help!


i can't loggin because the network was interupted.
can you help this problem ???
thks

Aug 27, 2009 | Facebook Social Network

3 Answers

Microsoft office


When you try to start a Microsoft Office 2007 or Microsoft Office 2003 program, you may receive the following error message or an error message that is similar to the following:

Error 25090. Office Setup encountered a problem with the Office Source Engine, system error: -2147023836. Please open SETUP.CHM and look for "Office Source Engine" for information on how to resolve this problem.

CAUSE
This behavior occurs when the following conditions are true:

* Two people installed Office on the same computer.
* Both installations were completed by using the AllUsers="" parameter to set the installation for the installing user account only.
* When both people were prompted to remove files that were copied locally at the end of Setup, both people did not remove the files.
* One of the two people removed Office.

RESOLUTION
To resolve this behavior, start the Setup program for Office. To do this, follow these steps:

1. Insert the Microsoft Office 2003 CD in your CD drive or DVD drive.
2. If the Setup program does not start automatically, locate the Setup.exe file on the CD, and then double-click the file to start Setup.
3. After the Setup window appears, cancel Setup, and then respond to the prompts to exit Setup.

Note: You do not have to complete the Setup program. Setup fixes the error condition when it is first invoked.

Sep 05, 2008 | Microsoft Office Outlook 2003 for PC

2 Answers

Installing problem...


Try to see if you can resolve with the steps given here
first link
Second option

Apr 12, 2008 | Adobe Photoshop CS2 for PC

2 Answers

Error Messages.


Dear coolsoph,

I could help u more if u can tell me the error messages u r getting but no problem dear i still help u out. what u have to do is just unistall the network driver to uninstall the network driver Right click on My computer-> then select properties-> the select Hardware-> then select network adapter right click on that and then uninstall the network driver after uninstalling the network driver restart the system and then Reinstall the network driver the problem will solved.



Regards,
Bittu_8

Feb 13, 2008 | Computers & Internet

1 Answer

Lexmark T640 -- Networking


Printer set up is most likely because they have the wrong driver

the ones that can not install at all, probably have to have the permission to install as an administrator.

 so there are two issues.

Sep 17, 2007 | Lexmark T640 Laser Printer

Not finding what you are looking for?
Sony Playstation 3 (PS3) Console Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

shaun taylor

Level 3 Expert

1525 Answers

marley mcelhinney

Level 3 Expert

490 Answers

juanmireles1

Level 2 Expert

216 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...