Question about Uniden DECT 6.0 Cordless Phone ID

Open Question

I would like to add new handset to dect 1480-4 cordless system

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: GE DECT 6.0 GHZ cordless fone (model 28111) don't ring

There is a Do Not Disturb button on the base unit. Press it to turn the feature on and off.

Posted on Jul 09, 2008

  • 1 Answer

SOURCE: Just bought an additional handset

This exact thing happened to me. Same model number. No matter what I did, the new handsets would not register.

The solution? Reset the entire system:
1. On the BASE - Unplug from wall both power and phone line. Unplug battery from base handset.
2. ON the Extension phone - unplug from wall and unplug battery from handset.
3. Wait AT LEAST 5 minutes.
4. Plug back in BASE power.
5. Plug back in BASE phone line.
6. Plug back in EXTENSION handset battery. Don't plug in BASE handset yet.
7. Follow steps to program EXTENSION. When successful:
8. Plug back in BASE handset battery.

Posted on May 12, 2009

  • 38 Answers

SOURCE: I have a Uniden DECT 6.0 phone set. I damaged one

On the base, open the menu and select Register Handset. The display should say Handset Registering.
On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds).
1.
2.
DSL filterTelephone cordTelephone wall jack
45
In about 30 seconds, the handset display should say Registration Complete. Press Talk/fl ash and make sure you get a dial tone.
If...
Try...
you don't hear a dial tone
the display says Registration Failed --
Making sure the handset is fully charged, then start over at step 1.

Posted on Sep 08, 2009

  • 1 Answer

SOURCE: I purchased Uniden DECT 6.0 cordless phone system

need manual for my phone.

Posted on Oct 20, 2009

  • 1 Answer

SOURCE: I have a Uniden DECT 1480-5c phone (base 5

Try disconnecting battery for a couple of minutes on each phone that has the problem.

Posted on Jan 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need manual


If the manual didn't come along with the phone, it is easier to just look on google for 'Uniden DECT 1480-3 Black Cordless Phone w/ 3 handsets DECT 6.0, Answering Machine, Caller ID' and it should pop right up!!

Jul 07, 2015 | Uniden DECT 1480-3 Black Cordless Phone w/...

1 Answer

Cant get it off intercom?


To end an intercom call, press End; both both handsets return to standby.

Jun 15, 2015 | Uniden 1480-4 DECT 6.0 Cordless Phone with...

1 Answer

THE BASE SET OF MY UNIDEN 1480-3 CORDLESS PHONE NO LONGER BEEPS WHEN I HAVE A NEW MESSAGE. CAN ANYONE HELP?


You can set or change the answering system options from any handset.
Open the menu and select Ans setup then select Message alert and activate it!

Beeps will be on!

Oct 05, 2014 | Uniden DECT 1480-3 Black Cordless Phone w/...

1 Answer

Need to know how to record on the uniden 1480-4


Access the answering system from any handset by opening the menu and selecting "Ans. Setup". Wait until the system finishes its announcements, or press 5 (Stop) to skip them.
Press 8 (RecNewGreeting).
Wait for the system to say "Record greeting," then begin speaking.
When you're finished, press 8 to stop recording. The system plays back your new greeting.
To keep this greeting, press End. To re-record it, go back to step 2.

If you need a manual, you can download one here.

Oct 25, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Lost the manual and tried to look it up but model number is not on the List. DECT1480-3. Trying to make the volumn higher when taking to people can hardly hear them and need to set up my answering system.


You can download the manual from the manufacturer's web site at
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1480-2om.pdf

The only difference between the 1480-2 and the 1480-3 is that the -3 has one additional handset. Operationally they're identical.

Sep 05, 2011 | Uniden DECT 6.0 Cordless Phone

1 Answer

I need a manual for Uniden 1480-5A cordless phoneset with answering machine, how can I obtain one?.


You can download manuals from Uniden's site. Here's the 1480-4A manual, which is the same base with 4 handsets.

Jun 23, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I need a manual for Uniden DECT 6.0 product name DECT 1480-8 model # BM 40092294


The manual is the same for all DECT1480 phones; the digit after the dash indicates the number of handsets that came with the phone initially.

The English version of the manual for the DECT 1480 is here http://www.uniden.com/pdf/DECT1480-3om.pdf . This is a 2 accessory handset version. A complete list of the available Uniden DECT cordless phone manuals is here: http://www.uniden.com/index/manuals_results.cfm?cat=59 .

I hope this helps.

Cindy Wells

Jun 04, 2011 | Uniden Cell Phones

2 Answers

I have Uniden DECT1480-3. I purchased two expandable handsets, but I cannot figure out how to get the new handsets to register with the base unit.


Up to 6 handsets can be registered with the DECT 1480 phones. I have the 5 phone unit and needed to add the 6th phone. All I got was "Searching" in the display and the battery wouldn't even charge!

So here's what you have to do to get additional phones (up to 6 units) to work with the base. If you can get past step 1, it's a snap...

Step 1: Place a charged battery in the handset. This could be a problem if all your handsets are not registered, since unregistered phones don't charge (who thought of that design?). What I did was SWAP the battery from an already registered and charged phone with the new unregistered phone.

Step 2: Here's where the magic happens. Press the 'END' and '#' keys simultaneously... hold them down until a System Reset menu appears. Select "Deregister HS" and press Menu.

Step 3: Now, do the same thing again (hold down END and #), but this time select Base Unavailable and press Menu. You will see Base Unavailable Yes/No... Select Yes. Then place the handset in the base, wait a few seconds, and Voila!. it's registered. You can even change handset numbers using this menu if you play around with it.

Thank you, helpful employee at Costco for supplying the magic code. And hey there, UNIDEN... including this in the operation manual would have saved many customers much grief with de-registered phones!

Enjoy!

May 14, 2011 | Uniden DECT 6.0 Cordless Telephone...

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Phone ID Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

Cindy Wells

Level 3 Expert

5060 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...