Question about Raymarine C80 GPS Receiver

1 Answer

My boat is pointed in the wrong direction on my Raymarine C80 chartplotter?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I'm not sure where you would locate "reset to factory specifications". Look for it in the GPS menus (may be in the System) and reset, it is no big deal to reset a GPS, it will not hurt anything. I the GPS is set to back Track. To check this turn your boat around and follow the track on the lake chart. If you and your boat are now going in the same direction the GPS was set on Back Track.

Posted on Aug 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuses blowing on raymarine e series 125 chartplotter


It sounds like the fault is within the plotter itself. There should be any component, which shorts with main power supply, causes the blow of fuse to overload. I do advice you not to try to repair it by yourself, and contact the authorized service center.
Gopakumar Gopalan Google
Sophistacated testing instruments are needed to repair this type of devices.

Mar 21, 2014 | Raymarine GPS

1 Answer

What is the connection path from Garmin 72 to raymarine c80, using NMEA 1083


I'm taking this as you want to send the gps information to your C80 not receive from the C80? If this is the case the brown wire on the garmin is the nmea data out +. The Black wire is considered nmea out neg (-) of the garmin. So hook the garmin brown to the white on the raymarine. Hook the black from the garmin to the green on the raymarine. That means you are outputting lat/long info to the raymarine from the garmin.

Jan 14, 2012 | Raymarine C80 GPS Receiver

1 Answer

C80 boats heading is off by 90 degress, after the boats batterywent flat, which internalchart should I be on wassa1984 am using the kit inthe uk.


turn off the unit ,press and hold the no1 soft key ,keeping that key pressed press the power on button for 5 seconds this will force the unit to a full factory reset and reset the unit to its original
factory defalt setting

Apr 30, 2010 | Raymarine C80 GPS Receiver

1 Answer

I am buying a boat with a 2005 Raymarine c80. i need maps for alabama lakes and the gulf cost of Alabama and Fl


Call Mid-shore Electronics and speak to Ann. She may be able to help you out and have the chart shipped to you from Navionics. The number there is 410-228-7335.

Jan 30, 2010 | Raymarine C80 GPS Receiver

1 Answer

Boat on screen does not point the direction the boat is going e-80 series also chart will not go course up or heading up like the radar does unit is set in relative motion mode


The direction of the boat symbol is depending on the compass course from the autopilot. You will see that your GPS course (COG) and magnetig heading on the autopilot differs. Solution is to calibrate autopilot compass. Will advice you to not use course up, stick to north up or heading up.

Sep 08, 2009 | Raymarine C80 GPS Receiver

1 Answer

Scanner not reponding - Checking HW


1.try with a new software 4.29
if you have an old one like 2.14 you have a problem.
2. After this try you C 80 on a nother boat or Raymarine dealer
than you will know if the C 80 works

Jun 20, 2009 | Raymarine C80 GPS Receiver

1 Answer

C-80 WILL NOT TURN ON


if your C80 is mounted outside the boat maybe water came inside the C80 .
This typ has a lot of problems with their seal.
Water comes to the keypad and the powerswitch dont work anymore

May 06, 2009 | Raymarine C80 GPS Receiver

4 Answers

GPS antenna


If it is an RS 120 or an RS112 antenna you do not need to change it.These are both active antennas in other words they do all the gps computing in the unit itself. You need to look at the wire from the antenna. If it is a coax cable(2 wire) it will not work.If it is 3 or 4 wires it will work. If 3 wire (red ,silver yellow) just hook up color for color.If 4 wire you are going to have to figure out the wiring for it from the units wiring diagram.That could be a big enough pain that you might be inclined to change to the new antenna. If you wire the new RS125 antenna you must wire it to the seatalk buss. The seatalk wires are Red Silver and Yellow.The wire from the RS125 are red yellow silver green and brown.Wire as follow to your sea talk cable.Yellow to Yellow, red to red , silver to silver, green to red, brown to silver.
Hope this helps.

Jun 04, 2008 | Raymarine C80 GPS Receiver

4 Answers

Raymarine C120


I don't have the sounder so can't address your question directly, but you can download all Raymarine manuals for your gear directly at www.raymarine.com

Aug 23, 2007 | Raymarine E120 GPS Receiver

Not finding what you are looking for?
Raymarine C80 GPS Receiver Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Raymarine GPS Experts

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Steve
Steve

Level 3 Expert

694 Answers

The Knight
The Knight

Level 3 Expert

74473 Answers

Are you a Raymarine GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...