Question about Maytag MER5550 Electric Kitchen Range
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: oven burnout
The oven is controlled by an Electronic Range Control (ERC). This is the clock assembly on the range. The surface elements are powered by infinite switches and do not go through the ERC. That explains why the clock assembly is dead, your oven does not work, but your surface elements do. You need to replace the ERC. If you can provide me with a model number (located near the oven door or bottom drawer opening on most ranges, on the back of the console on some) I can determine what type of ERC you need and how much it might cost you. Post back with comments and let me know if I can be of further assistance. I hope this helps you.
Posted on Feb 11, 2008
SOURCE: Electric Kenmore Ultra Bake Oven
I finally found my manual to the range, and to change from celsius to fahrenheit press the BROIL button for 5 seconds. A tone will sound, and the temperature should switch to Fahrenheit.
As far as the code PF 5ab--it could be PF Sab which means the power went out during Sabbath mode. Try pressing and holding TIMER OFF for 5 seconds. If that doesn't work, then open the oven door, press STOP/CLEAR, press both the HOUR "up" and "down" arrow pad at the same time and hold for 5 seconds, "Sab OFF" should appear. Press START to accept the change, then close the oven door.
Posted on Sep 17, 2008
SOURCE: had a power outage and
my control panel doesn't light up for both ovens and the clock too. The porclain stove top all five panel do work... could i have blown a fuses? in the oven its self .
Posted on Nov 25, 2008
HI, The power surge has, essentially, destroyed your main control boards circuitry. This will happen during a power surge. Most oven control board are not protected from this type of potential damage. To confirm, simply unplug your unit for 5 minutes. Once the five minute reset has passed, simply re- introduce power to the unit, and observe. If you experience the same issues after the five minutes reset, this will confirm the damage to the control board.
It must be replaced if the damage persist after the reset.
Posted on Dec 31, 2009
Tips for a great answer:
Dec 29, 2015 | GE Ovens
May 02, 2015 | Frigidaire Stove/Oven/Range Cooktop -...
Sep 05, 2014 | Frigidaire 30" Self-Cleaning Freestanding...
Aug 27, 2014 | Whirlpool Ovens
Nov 21, 2012 | Ovens
Oct 18, 2009 | Kenmore 33169 Gas Single Oven
Jul 09, 2008 | Kitchen Ranges
Apr 15, 2008 | Maytag MER6772 Gemini Electric Kitchen...
Jan 10, 2008 | Kenmore 40494 / 40495 / 40499 Electric...
Mar 11, 2011 | Maytag MER5550 Electric Kitchen Range
369 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: