Question about Hampton Bay 54 In. 5-Blade Fan, Chestnut, Autumn Mist

1 Answer

Some one threw into reverse wtih out stopping fan ,now it dosent work , WHAT DO I DO TO MAKE IT FUNTION< IS SOMETHING DAMAGED ???? NEED TO KNOW HOW TO FIX IT .. RICHARD HANSEN TEL.580 -745 5120 E mail thank you

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

The fan motor needs to be checked.Check out iof the motor connections have got burnt or the motor itself needs burnt out.It should not be run in reverse.Doing this makes the motor go short and gets faulty.Check the motor and confirm.Also check if there is power coming to the electrical line to which your fan is connected. It needs to be checked with meter.Do it carefully take care you dont touch any live wire while checking this.Also remember that unplug the fan unit from power connection before doing it.Otherwise there can be a major shock /short circuit. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Aug 30, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I calibrate the heat and A/C climate control on my 2005 Trailblazer. I just replaced the old one, the fan speed stopped working. I know I need to calibrate it but don't know how.

I would try contacting some <a href="">mechanical calibration in Cincinnati, OH </a> I know of that could help you out.

Sep 17, 2013 | 2005 Chevrolet TrailBlazer

1 Answer

The mic on compaq laptop wont work

vista and windows 7 took sound driver by default this work partially download driver for sound from compaq site for full funtion mic dosent work without proper driver.

Feb 04, 2012 | Computers & Internet

1 Answer

Something fell down in the lint vent. I didn't know it and turned it on. It made and awful noise and now it won't work.

That something is probablly now jammed in the blower fan. T o get to it you need to remove the front of the dryer and you will see the fan blades in the lower left corner. To do this: unplug the machine, open the door and remove the 2 screws that are located in the top of the hole. this will release the top of the machine, lift it up and then remove the 2 screws that are inside the front panal at the top 1 one on each side this will allow you to tilt the front panal outward and lift it off the 2 fingers that hold the bottom in, be carefull and don't yank on the wires that are connected to the door switches. look in the fan husing and recover whatever it was that you threw down there reverse the process for reassembly

Oct 19, 2011 | GE Dryers

1 Answer

I have no mp3 player wtih good funtion in my n72 mobile pls tell me which is the best player for my phones

try LCG jukebox you can download it from here:

Sep 19, 2010 | Health & Beauty

1 Answer

Similar problem

Your fan receives RF signals from the remote for control. It may be picking up stray RF signals from a neighbor. Try re-programming your fan/remote to a different frequency.
(RF=radio frequency)

Jul 01, 2009 | Dryers

2 Answers

My fan reversed, but my controller does not have a reverse button

There is a switch on the housing of the fan. It is under the blades and above the lites if you have lights. Also same area as the chains. That is the reverse switch you might have hit it when cleaning the fan. just flip the switch iy goes left to right or reverse.
Good Luck and please rate

Jan 23, 2009 | Minka -Aire Brushed Nickel Remote Control...

2 Answers

Buzzer sound from intel d101ggc motherboard

Check the fans in your pc, it sounds like at least one of them isent working properly and your pc gets overheated. When a pc going to warm it gets really slow and hangs.
My guess is that the CPU-fan dosent work properly and your CPU gets overheated, but check all the fans to be sure. The CPU fan runs cantantly, check so it dosent stop now and then.

Good luck

Nov 21, 2008 | Intel D101GGC Motherboard

Not finding what you are looking for?
Hampton Bay 54 In. 5-Blade Fan, Chestnut, Autumn Mist Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hampton Bay Dryers Experts


Level 3 Expert

3287 Answers

Donald Klecher
Donald Klecher

Level 1 Expert

2 Answers


Level 3 Expert

102366 Answers

Are you a Hampton Bay Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides