Question about D-Link Wireless

1 Answer

Wireless router connected and everything enabled but still says not connected

I have had this product for a few weeks and everything has been fine until the now.i have downloaded the disc for this product again and still i have no wireless connection and everything is connected and abled.when i go into network connections its says disabled.i have tried troubleshooting the problem but still the screen at the bottom right hand corner of laptop has a red cross through it for the wirless connection.i dont uinderstand what is up as it was working fine yesterday.i am not computer minded so please can you help me with this and i hope i have explained things easily.
carolann

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 6,487 Answers

You said the wireless connection is disable, Did you enable it already by right clicking on it and selecting enable?

Posted on May 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to enable wireless multimedia


Got this from Apple website:

his applies only to third-party routers. Apple AirPort products do not have a setting to enable or disable WMM.

WMM must be enabled for devices to connect. Disabling WMM on your wireless router can prevent the following Apple products from connecting to an 802.11n Wi-Fi network:

  • iPad
  • iPhone
  • iPod touch
  • Apple TV

If you are unable to connect to an 802.11n Wi-Fi network on any of these devices, check to ensure that WMM is enabled and configured correctly on your wireless router. If you require additional assistance, please contact your router manufacturer.

Jan 28, 2012 | D-Link Computers & Internet

1 Answer

I have secured my router by connecting my laptop to the router by ethernet cable so now my network comes up as security enabled but I can't seem to connect to my wireless network although it shows the...


Remove the neighbor's network from the preferred network list.
add your own network in the list. If your router is old router then upgrade the firmware of the router. Firmware is the software of the router.
You have connected your laptop to the router, to secure the wireless network. When you connect the laptop to the router, make sure that the wireless network connection will be disabled.
Once you change the wireless settings, enable the wireless connection and connect to your network.


Apr 25, 2010 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

My HP laptop won't connect to my NETGEAR WGR614v7 router


What is your operating system (Vista/XP, older Windows)? Have you turned on the router's wireless router radio from the computer that is connecting? (Login to the router's setup page at 192.168.1.1 or 192.168.0.1 (depending on the router) and go to Advanced menu and click Wireless Settings.) While you are there, enable the SSID Broadcast (another checkbox hust below the one for Wireless Router Radio). Now check if your laptop can see the router.

Additional FAQs that might be helpful are at http://kb.netgear.com/app/products/model/a_id/2589. That page has a link to setting up XP for wireless networking as well.

Cindy Wells

Aug 11, 2009 | NetGear WGR614 Wireless Router

2 Answers

Help please! TP-Link Wireless Router TL-WR641G stopped working


It looks like all your devices by themselves are working fine.
Good start.
If you took the router out of your office I assume that the settings from the office and your home are different, which causes the setup not to work properly.

First of all you should find out which hardware version of the router you have and download the manual from here, so you have the information at hand when you're not online.

Then you want to rest the router to factory settings, so you start clean. In order to do so, use the Factory Default Reset button: First, turn off the router's power. Second, press and hold the default reset button then turn on the router's power, until the SYS LED lights up (about 3 seconds). Last, release the reset button and wait for the router to reboot.

Follow the instructions in the manual form page 8 on onwards with a special view on setting up PPPoE. Have your information form your DSL provider handy (Account name and password).
The default webpage for the router interface is http://192.168.1.1
Username and password are both "admin".

Do not enable any wireless security until everything is working fine.

Make sure later to change the password to something else, so no one can "take over" your router.

If this solution did not help, please don't rate it as "Thanks for trying" or so, but leave a comment instead and I will check back and we can work form there.

Good luck!

Jan 27, 2009 | Linksys Wireless-G Broadband Router

2 Answers

No wireless light on modem. No remote access for laptop


The wireless side of the router must be disabled. The easiest way to fix that is to do a hard reset of the router. Have a look at the back or base for a "reset" switch ...might be behind a little hole in the case. Press it in for a few seconds and the router should reset to factory. That should re-enable the wireless. If not ...then the router may be faulty.

Jan 01, 2009 | Westell Wirespeed VersaLink...

1 Answer

Intermittent Enabling


First you can try to uninstall and reinstall the driver of the wireless adapter on that desktop. Unplug and re-plug the wireless card. If it is a wireless PCI card, make sure the antenna is tightly screwed on. Install just the driver of the wireless card and not the utility/software that came with it. You can also try to change the channel on the wireless router by going to the router's user interface. If you're on channel 6, choose channel 11 and save the settings. Then power cycle the router, unplug the power for 30 seconds then plug it back in. Check now if you can connect wireless.

Oct 29, 2008 | Linksys WRT160N Wireless Router

1 Answer

Degrading connection


If that's the case I will suggest you to reset and reconfigure the router again and try using a different channel like channel 1-6 or 11 then dont forget to enable wireless security to make the connection much stable, then after that if still low signal you can get a wireless range expander that will repeat the signal of your router or you can get a new router.
Sorry for the late reaply, hope that helps..

Jun 17, 2008 | D-Link Xtreme N DIR-655 Wireless Router

2 Answers

Linksys wrt300n wireless router


you could of cracked a solder joint on the mainboard. you probably couldnt see that.

Nov 02, 2007 | Linksys WRT300N Wireless Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Mike

Level 3 Expert

4336 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...