Question about Dryers

1 Answer

My machine is 5 yrs old, it's tumbling but not drying. there dosn't seem to be any heat generating. we have 2 small children so this machine takes a lot of punishment.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

You will need to get inside the back and see if their heating box fell lose their usual held in place by spring binders we had the same issue if this is the case go to a hardware store and get a new spring and reattach the heating box unplug the machine before taking it apart it is a bit intensive to do but cheaper than a new unit if this is not the case then you may need a new unit

Posted on Aug 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool AWZ 410 washer dryer is not generating any hot air when drying. The dryer drum is tumbling but with cool air only.


Unplug the unit and take the top with the screws holding the lid on. Take a look at all of the wires on the top of the machine. You might notice broken/burnt wires on the safeties that are close to or that directly activate the heating element located in the blower housing located at the top of this washer/dryer condensing unit.

Nov 26, 2013 | Whirlpool LER4634J Electric Dryer

1 Answer

The tumble dryer function on my Hoover Performa 1100 WA 110 isnt heating up


The machine has a overheating protection that is blown. But you can reset it. Take if the top cover. You should ser a small black round temp sensor with two wires. And a red button in the middle. Push the red button. It should work. If not it could be many reasons for this

Nov 11, 2013 | Washing Machines

1 Answer

Electric dryer tumbles but does not dry clothes on any setting. dryer is only 4 yrs old.


Heating element has gone bad. You need to unplug unit. remove back, then find heating element and remove it. Look for what looks like broken springs, if found replace element. 99% of electric dryers not drying are the heating element. Cost around $50

Sep 28, 2010 | Dryers

2 Answers

My Roper elictric dryer is not drying clothes


If you are experiencing longer dry times and/or poor drying efficiency, the following link can give you some tihings to check before assuming there is a malfunction with your dryer:

http://www.fixya.com/support/r3578821-dryer_takes_too_long_to_dry

The number one cause of dryer heat related problems is poor exhaust ventilation. If not vented properly, a dryer will not dry efficiently, will take longer than required to dry, and will cause the heating circuits to overheat to the point of failure. The dryer will actually seem hotter as the heating circuits begin to overheat. This is also the source of many fire hazards if not resolved. Read through the link provided and review some of the potential causes. Hopefully, this may save you a service call. If you check everything and still have poor heating issues, please let me know. You may have an internal bias or hi-limit thermostat malfunctioning.

Jan 05, 2010 | Roper RES7646KQ Electric Dryer

1 Answer

No heat from dryer


Common faults -
1 The heating elements can fail (meaning open circuit)
2 There are cut-outs (T.O.C's) that might need resetting
3 The thermostats (stats) can trip out or burn out (meaning opencircuit)
4 Moderntumble dryers also have sensors and pcb's (Printed circuitboards) thesehave programs that can fail and circuitry although most should produce an errorcode showing you were the fault is.
5 Faultyconnections and burned wires may also be the fault.



Free tumble dryer repair videos


We have a Free full video library on appliance repair video’s

Nov 03, 2009 | Amana ALE331RAW Gas Dryer

1 Answer

Dryer taking too long to dry


If you can get the dryer outside, blow it out from the bottom with compressed air (using an air compressor or even a leaf blower). make sure the vent is clear and has no lint buildup. make sure the burner unit is also lint/dust free. If it is still heating, that is good news, and it is most likely a "breathing" issue. it also could be an issue with your gas pressure, however that is very unlikely. Best wishes in this project.

Oct 22, 2009 | Kenmore 73952 Gas Dryer

1 Answer

LG dryer (model DLE3733W) takes forever to dry the clothes.


check your vent hose for a clog. If dryer dont vent clothes wont dry.

Aug 25, 2009 | LG DLE3733 Electric Dryer

1 Answer

Takes 3 hours to dry a small load, dryer is 3 1/2 yrs old


You need to clean vent hose and vent line in wall of house.

May 08, 2009 | Dryers

1 Answer

Keeps on cutting out on Hot drying cycle


this will be a problem with your thermostats 1 of them will have a thermal cut-out switch built onto it this thermostat needs replacing it is faulty

Dec 07, 2006 | Zanussi TC7114W Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...