Question about Lowrance LMS-332C GPS Receiver

1 Answer

My Transducer had broke and the sonar went out, then the transducer fell completely off and the unit itself will not power up. I checked the power ot the unit and i have 12 volts going to the unit. It will not power on.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

All Lowrance systems have an in-line 3 Amp fuze. My guess is that when it broke and fell off the fuze shorted out. Look back the power sypply to the unit and you will find the in-line fuze. Replsacit with a new 3 Amp fuze and you should be up and running.

Posted on Aug 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Garmin 551s sonar stopped working, no bottom definition or ability to see fish GPS charts and speed all work It shows 3 step image repeats top of the screen / water surface has the transducer packed


Check you transducer cable route and connections. Look for kinks, punctures, & tears in cable. Visually check the transducer for damage. #2 check the units operation on a friends boat with the same set or research a local marine repair shop to check ops. Best of luck on the problem.

Jan 11, 2016 | Garmin Boating

1 Answer

How to install wiring


Start at the transducer, mount it then pull the transducer wiring forward using a wire snake. At the same time pull forward 14ga wire to attach to your power leads.
on most boats I've done this process takes from 90 minutes to 3 hours.
The transducer and head unit are easy to put on. Getting wire from point A to point B is the time consuming part.
Once you have your wires pulled forward route them to your head unit at your console. Drilling of access holes may be required.

Connect power, plug in the transducer line.
Black to negative at the battery, red to positive, don't forget to put in the in line fuse included in your box.

Good luck.

May 24, 2015 | Lowrance Elite-7 Hdi Sonar/Gps Combo,...

1 Answer

Can i put lowrance 5hdi sounder and a lowrange sounder/gps 7hdi on the same transponder unit?


If you want to use two head units off of 1 transducer the answer is yes. You will require a transducer switch that allows you to select which head unit receives the sonar signal.
If you want to swap head units utilizing the same transducer the answer is also yes you can do that.

Dec 19, 2014 | Lowrance X515cdf 5" Color Lcd Sounder With...

1 Answer

My Mark 4 sometimes shows incorrect depths. The transducer has not moved and no problem with electrical. One point it is working fine, the screen then runs multiple vertical lines and the depth chan


Take note if when the vertical lines appear on the screen if the depth numbers begin to flash. If this is the case then the transducer has lost bottom contact and the unit is trying to reacquire bottom contact. If the transducer is parallel to the bottom of the lake while your boat is not moving then, the next time you have it on the trailer, turn your unit on and go listen and or feel the transducer to see if you can hear and or feel the tick or sonar ping. If you can't your transducer may be faulty. If the loss of bottom contact occurs when you are moving it will happen at a certain speed. This is the result of air bubbles passing under the transducer and disrupting the sonar signal causing loss of bottom contact.

Sep 19, 2014 | Lowrance Mark 4 Chartplotter/fishfinder...

1 Answer

Got a HDS 5 and im getting bad or false on my sonar when traveling showing fish and structure.When trying to hold ground and im backing up it doesn't even read?i have it on auto sensitivity


Check the mounting and cable connection of the transducer on the stern. If loose will tilt during movement, in reverse wakes from the prop. CAREFULLY check unit during these conditions. The transducer needs to be completely submerged. Good Luck.

Jan 13, 2012 | Lowrance HDS 5 X Sonar ()

1 Answer

Can i install 2 x52 units on bow and stern with


Yes you can...you would have to install a rotary switch between the displays and the transducer. You would also have to make sure to turn both displays off before switching the switch.

May 15, 2010 | Lowrance X52 Sonar Fishfinder Without...

1 Answer

Sonar does not appear to work - not picking up depths or bottom structure. All other functions look good.


This problem is most likely linked with your transducer.

1. Check your transducer cable and make sure the plug terminals are clean, as well as the plug on the back of the unit.
2. Make sure the transducer cable is plugged in correctly and securely.
3. Make sure the transducer is in the water and mounted according to the directions, parallel to the bottom of the boat
4. Turn the unit on while the boat is in the water, but with the engine OFF.

IF it works when the engine is off, but vanishes when the engine is on, you may be having electrical interference.

IF it works when the engine is running, but vanishes when the boat is moving, it is a turbulence problem. Move the transducer.

IF it does not work at all, try borrowing a new or a "known good" transducer and seeing if it works then. If so, replace the transducer.

Let us know if these work or now.

Oct 15, 2009 | Eagle Fishmark 320 Portable Fishfinder

2 Answers

Lowrance x135 not functioning properly


Had the same issue with another brand. Turned out the transducer cable was picking up noise from other cables (power, trolling mtr. etc). Try moving the transducer cable away from any other cables. I put the cable in a 1/4 " plastic housing up to the point where it was above deck and it stopped all the strange stuff. Not sure about the temp issue??

Mar 29, 2009 | Lowrance X135 Power Pro Sonar Without...

2 Answers

Mounting a sonor/transducer on a MinnKota Riptide ST


Did the unit come with a strap to mount the transducer to a bow mount electric? Most units do... If not there is probably one available for the unit as an aftermarket accessory or accessory from the manufacturer... Regarding the transducer wire, just wrap and rout this up the front of the bow mount motor shaft so when you pull the motor up and secure it, it is not going to get in the way. You could cable tie the cord down near the bottom of the shaft and one up near the top where they wont interfere with the motor bracket when the motor is positioned up on the boat.

Mar 17, 2009 | Minn Kota Riptide St Saltwater 80 Bow...

Not finding what you are looking for?
Lowrance LMS-332C GPS Receiver Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lowrance GPS Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

15167 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Lowrance GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...