Question about Brother MFC 8300 Laser Printer

2 Answers

Brother MFC 8300 Fax Machine

Having printing problems with my fax machine. The right side of the letter is having poor printing quality. Words are missing and you cannot read. The rest of the letter is fine. I have changed the toner and also conducted a thorough cleaning to the fax machine.

Posted by on

  • Daniel Blask
    Daniel Blask May 11, 2010

    is there anything that looks like the toner is getting smeared down the right side where the quality issue is happening or is it just faded print or no print at all?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 170 Answers

If I understand what your saying correctly, the quality issue is not smearing at all, if this is the case and you have already changed the toner and have the same results then more than likely, the mirrors in the laser housing are fogged up on that side with toner dust. If you look at the toner cartridge and can see the open **** where the laser actually writes on the colored drum inside that will help you find where the laser is, then you'll want to take canned air and get the straw inside the actual laser housing **** and blow in their really good.( not the **** on the toner but the one inside the machine). worse case, you'll have to open up the machine to open the laser housing and clean it out that way.Try this and see if it helps...

Posted on May 09, 2008

No, the toner is clear on the whole page except for the right side where it fades out and you can barely make out the words. Everything else on the page is fine. The drum still has 17% of life left in it.

Posted on May 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brother mfc-7840w won't receive fax


The first thing that I would try multiple people to ask them to fax you.Sometimes the 2 machines don't "sync".This is a toll free fax test number that I always use to check my machines..1-888-473-2963.Just write the words "FAX TEST" in large letters on a blank sheet of paper..fax it to that number...leave the line open...you should get a fax back in about a minute.If you get a fax back...your machine is fine...let me know if this was helpful....thanks.

Dec 14, 2011 | Brother MFC 7840W Printer

1 Answer

MFC 8300 Laser Printer: do i receive anything after i send a fax?...


Only if you have set the fax options to automatically print a sent item/transmission report. Otherwiase you will receive nothing unless the person or company you sent a fax to decides to fax you back.

May 06, 2010 | Brother MFC 8300 Laser Printer

1 Answer

My Brother MFC490CW Fax M/c will only send one fax then reverts to scanner


A DEPENDABLE MACHINE BUT LACKS PRINTING QUALITY! Date of Review: Jan 14, 2009. The Bottom Line: Love the fax...not too impressed with printing quality or ink prices. Review: I bought my Brother Multi-Function Center 440CN a couple of years ago. .... Brother MFC-490cw Color... Brother MFC-440CN All-In-One. ...
www.shopping.com

Dec 03, 2009 | Printers & Copiers

1 Answer

Have the brother mfc-5890cn having fax issues


Can you hear the receiving fax pick up the line? If so, you may need to slow the speed of your fax modem to allow for poor line conditions. You can find the instructions on page 12 of the Users Guide. If you don't have one, you can download a PDF file of the guide on the Brother web site.

Oct 09, 2009 | Brother MFC-5890CN All-In-One InkJet...

1 Answer

Brother mfc- 665cw, receiving faxes


From the Brother web site.


Description of Problem 100000018247
When I launch PC-Fax Receive Program, I receive an error stating: The Fax Receive program must be started to receive PC faxes. What can I do?pc fax rx

Description of Solution 200000023257
You may receive this error if the pc fax application is closed and you have faxes stored in the memory of the machine. To resolve this issue,you will need to print the faxes already stored in the memory of the machine. To print the faxes, please follow these steps:

1. Press the MENU key.

2. Press the UP OR DOWN ARROW key to select Fax.

3. Press the OK key to confirm your choice.

4. Press the UP OR DOWN ARROW key to select Print Fax.

5. Press OK.

6. Press the BLACK START key.

- Your Brother machine will print the stored faxes.

7. Press the STOP/EXIT key to exit the menu.

8. Once the stored faxes have been printed, click WINDOWS/START, (ALL) PROGRAMS, BROTHER, XXX-XXXX (X = MODEL NUMBER), PC-FAX RECEIVING, XXX-XXXX or RECEIVE (depending on your operating system).

9. The Brother PC-fax receiving icon will now appear in your Windows Task Tray indicating that Brother PC-Fax Receiving is active.

Jul 03, 2009 | Brother MFC-7820N Printer

6 Answers

Using MagicJack for faxing; however, Brother MFC 290C is stating poor line condition - why? Also say's low ink Magenta - would that create this problem?


I had the same problem trying to send out faxes out using my Brother MFC 7340. I use a magic jack phone line. Page 106 of the user manual says if sending via VOIP phone line, you should press menu, then 2, 0, 1 to select "Basic (for VOIP) mode. Then press ok. Then press stop/exit. This cuts the modem speed down to 9600 bps and turns ECM off. Then retry to send the fax. I did that and can now send and receive faxes.

Jun 06, 2009 | Brother MFC 420CN All-In-One InkJet...

1 Answer

Double sided copying


http://www.brother-usa.com/ModelDocuments/Consumer/Software%20Users%20Manual/SUM_DCP_7030_7040_MFC_7340_7345N_7440N_7840W_EN_1650.PDF

here is the manual p4 and p16 discuss the topic:
Duplex printing 1
The supplied printer driver supports duplex printing.
Guidelines for printing on both sides of the paper 1
�� If the paper is thin, it may wrinkle.
�� If paper is curled, turn over the stack, straighten it and then put it back in the paper tray or the Manual Feed
Slot.
�� If the paper is not feeding properly, it may be curled. Remove the paper, straighten it and turn over the
stack.
�� When you use the manual duplex function, it is possible that there may be paper jams or poor print quality.
If there is a paper jam, see Paper jams in the User’s Guide. If you have a print quality problem, see
Improving the print quality in the User’s Guide.
Manual duplex printing 1
The machine prints all the even-numbered pages on one side of the paper first. Then, the Windows® driver
instructs you (with a pop-up message) to reinsert the paper. Before reinserting the paper, straighten it well,
or you may get a paper jam. Very thin or thick paper is not recommended.
Simultaneous scanning, printing and faxing 1
Your machine can print from your computer while sending or receiving a fax in memory, or while scanning a
document into the computer. Fax sending will not be stopped during PC printing. However, when the machine
is copying or receiving a fax on paper, it pauses the PC printing operation, and then continues printing when
copying or fax receiving has finished.


�� Manual Duplex
Check Manual Duplex. In this mode, the machine prints all the even numbered pages first. Then the
printer driver stops and shows the instructions required to re-install the paper. When you click OK the odd
numbered pages are printed. There are six types of manual duplex binding directions available for each
orientation.
�� Booklet Printing
When you want to print a booklet, use this function. To make the booklet, fold the printed pages down the
middle.
�� Binding Offset
If you check the Binding Offset option, you can also specify the offset for binding in inches or millimeters

May 14, 2009 | Brother MFC-7440N Laser Printer

5 Answers

Cannot Send or Receive Faxes


here you might find an answer:

http://welcome.solutions.brother.com/bsc/public/us/us/en/faq/faq_top.htm?reg=us&c=us&lang=en&prod=mfc240c_all

Mar 29, 2008 | Brother Multi-Function Center MFC-240C...

1 Answer

Fax machine


Replace the fuser. Easy job.

Dec 11, 2007 | Brother MFC 8300 Laser Printer

Not finding what you are looking for?
Brother MFC 8300 Laser Printer Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Printers & Copiers Experts

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

John mullen

Level 2 Expert

245 Answers

Are you a Brother Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...