Question about HP LaserJet P3005dn Printer

2 Answers

Freeze at start up

Hi guys. please help. when i turn the printer on, it loads the memory to 80MB and stops there and wont' do anything else. I dont know what the problem is. I tried to take out the memory and turn it back on again. it still does the same thing. I stopped after loading up the memory. any help will be very appriciate. Thanks guys.

Posted by on

  • 2 more comments 
  • hnguyen May 08, 2008

    this printer is brand new, haven't use it yet. All the trays are close tight.

  • Anonymous May 16, 2008

    my phone has frozen

  • a_myzara Mar 27, 2009

    my printer always show 096MB and indicator READY can't on.

  • Anonymous May 15, 2009

    096MB error - printer will not go to "ready"

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Replace the formatter

Posted on Feb 13, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 54 Answers

Try to replace the toner and turn it on if this doesnt help check weather all the paper tray are closed proprly

hope this may help

Posted on May 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My printer is saying Memory card Error, I dont have any memory cards in any of the slots...Please help, wont print anything, I have tried to un-plug and it doesnt change anything.


Usually it's the formatter on-board memory that is bad.
If a card has been used before, it may have bent a contact, or if pushed too hard, damaged the socket.

Mar 17, 2011 | HP Officejet Pro L7680 All-In-One Printer

3 Answers

Hl1440 drum indicator flashing


ok turn it off take the toner out clean all the terminals put them back in make sure everything is closed properly turn the machinie back on and let me no what happenes then

Sep 12, 2008 | Brother DR-400 Replacement Drum - 20000...

1 Answer

Wont stop printing the same thing over and over again even though I have stopped the job and removed the usb cable


Assuming you have a Windows operating system like Win XP, try the following:

Go to START
Then SETTINGS
Then CONTROL PANEL
Then PRINTERS AND FAXES
Then click on the your printer iin that list - XEROX 6110

This will open the printer utility page.
In the top left hand corner of the page click on the PRINTER option.
Scroll down to the CANCEL ALL DOCUMENTS option.
Just click on that and confirm YES.

That should stop the printer from printing and clear anything in its memory buffer.

Please comment back here to this page if you have any questions or just require further general assistance and I will respond as soon as I see it.

If this was at all helpful please click on the 4 Thumbs Up helpfulness rating icon you see on this page.

Thank you very much and good luck.

Joe.

Feb 23, 2011 | Xerox Phaser 6110 Laser Printer

1 Answer

Printer won't take the paper


There is a little catch on the left side where the paper goes in, make sure that it is not stuck in the UP position, that will cause the printer to refuse to collect paper and send it trough the body and print. If it is down, try to use 20 pages of paper and do a PAPER FEED from your options, this will also clear it. If these fail, simply turn off the printer and let it set for 20 minutes to clear the chip memory, then start it back up. please let me know if there is anything else you might need, my pleasure to help out! GUY :)

Sep 24, 2010 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

Hello,my hp laser jet 1320 does not work correctly,I work under an office network, some time it prints and some time does not print specially about pdf files or high size files, the alert is: fail to...


Is there a typical application you are using? I noticed that file size (especially in adobe) can be an issue. If you go to printer settings (start / settings / printers / right click on the 1320 and select properties) choose device settings and the very bottom item is printer memory. I would increase this to like 80mb.... hope this helps

Jul 19, 2009 | HP LaserJet 1320 Printer

1 Answer

Canon Mx300 wont recognize my paper. says:load paper


I cant print...orange light under alarm keeps flashing...please help...patricia

Jun 04, 2009 | Canon MX300 Office All-In-One Printer

1 Answer

Asterixs on Led display


ram problem pull and reseat ram If still a problem, one of the ram chips faulty Inkypete

Apr 22, 2009 | HP LaserJet 4300n Printer

1 Answer

Hp 3005dn wont start up all the way


The unit has a bad formatter. The formatter generally comes with memory installed Part# Q7848-31004. Part is super easy to change 6 phillips head screws and 3 cables (ribbon, 6 pin, and 3 or 4 pin power) Remove formatter cover the remove formatter door by opening then lifting up, then unplug the 3 cables then remove the 6 screws. Install is reverse of removal.

Jun 18, 2008 | HP LaserJet P3005n Printer

1 Answer

Printer keeps reprinting same material


Hi Canela,
Unfortunately most printers have what is called a Cache memory. once you initiate a print job the computer loads it in to the printer, Much like filling a glass of water then the printer takes slow sips so as not to overload the job..if you decide to cancel the print job at your computer you also have to hit the stop button on the printer. In most cases this will empty that "glass" Out and clear the memory. In Vista this problem is inherent to that O.S. I'm still an Xp kinda guy. I hope this helps. Be mucho blessed.. Mark

Dec 07, 2007 | Lexmark X83 All-In-One InkJet Printer

Not finding what you are looking for?
HP LaserJet P3005dn Printer Logo

Related Topics:

405 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...