Question about Jenn-Air JED8430 Electric Cooktop

1 Answer

JENNAIR OVEN FCE30611WC FUSE. The element went on this oven. When cancel was pressed to shut off the oven, the display went black....is it possible that this is just a blown fuse? If so, what fuse do I get and where does it go?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Hi,


The fuse is located behind the rear panel.You have to replace it
It is called thermal fuse.It will control the display and control of flow of electricity through the board.Yes you are correct blown fuse is the problem that make display will not to work.


It looks like the above picture
JENNAIR OVEN FCE30611WC FUSE. The - 9e49940.jpg

You can get the internal wiring diagram in the manual and the parts.part no 34
For more clarification have this:
3f2c3f6.gif

post a comment for further assistance.
thank you for using fixya have a nice day:-)

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dcs oven wos130 wont reach set temperature on bake


Good afternoon Steve!
The answer may depend a bit on what you mean by 'stops heating'.
  • One interpretation could be 'the heating shuts off, and the oven goes back toward room temperature
  • The other would be that it heats up, but it heats to a certain temp and then stays there. it's just not as hot as it's supposed to be.
If it's the former, that sounds like something is overheating and an interlock is engaging because it's interpreted as 'I'm too hot where I shouldn't be, and I should shut off before I cause a fire. I'd leave that to a better trained service tech.

If it's the latter, then it'll depend on how low it is. If it's way low, then there's a couple possibilities:
  1. The heater element is defective, and even at the full current draw the oven can run, it can't get any hotter than that upper temp. This would mean replacing the element.
  2. The temperature sensor in the oven is defective or mis-mounted. There should be a temp sensor inside the oven cavity. if it's disconnected, or, say, bent out of place and much nearer the bake element then it should be, then the heat coming direct off of the element may be fooling it into thinking the oven is hotter than it really is. this could mean replacing the temp sensor, or just re-mounting it to proper position.
If it's just a bit low, then there could just be a calibration problem. If you look at the manual here
DCS WOS 127 Use And Care Manual Child Safety User Option you can see how to adjust the calibration up or down in temperature to, hopefully, match the oven thermometer you're trying to use as a check.

Hope this helps!
Good Luck
D

Nov 18, 2015 | DCS Wot-130 30" Wide Single Electric Wall...

1 Answer

We set the ovens to bake, they click but do not heat up.


Could be the elements.if it is a fan oven the elements sit behind the rep late.first check the fuse box.then if the oven lights up it could only be the elements.they are easy to replace .you can buy the replacement units off eBay.you can also watch a tutorial on replacing them on YouTube.

Jan 18, 2015 | Electrolux Frigidaire Gallery 30" Double...

1 Answer

Why won't our oven fan turn off? The oven has not been used and oven is cold.



Hello friend, thank you for your inquiry!

I understand that your fan is not turning off and the element reads "HE" on your Frigidaire range. It sounds like you could be having an issue within your control panel or wiring harness. It may not be communicating properly to your fan or element that it is shutting down. I would recommend having a technician come out to properly diagnose and repair your appliance. -Matt

Sep 01, 2014 | Frigidaire Ffes3025lw 30 Smooth Top...

1 Answer

Why would there be no heat from frigidair oven elements?


Make sure the oven timer is set properly, if its turned off, the oven will not go on. Also check if the oven has separate fuse, it may have blown.

Aug 24, 2014 | Frigidaire Stove/Oven/Range Black Glass...

1 Answer

Amana Stove just stopped working


Could be the fuse in the back turn off the power and trace the wiring with a multimeter, when you stop getting continuity there is the fuse.
Good luck Ray

Apr 15, 2014 | Amana 30" Self Cleaning Electric Range...

1 Answer

Electrical panel does not work


Hey John, this is JK. I understand that the display on your range is not working. You may have a faulty Electronic Oven Control (EOC). Please confirm there is power to the appliance. If there is no power verify that the power cord is properly attached to the unit, plugged into a dedicated outlet correctly, and that the circuit breaker/fuse is not tripped or blown. Also verify the power at the plug is correct. Is the time of day displayed when the clock button is pressed? Are you able to turn the clock OFF or ON? When the display is turned OFF the time of day will re-appear for a few seconds any time the pad is touched. To toggle the display ON or OFF, press and hold the CLOCK button until the control beeps once (about 15 seconds). If all of these suggestions pan out and the problem still persists, think about what may have happened prior to this occurrence. For instance, did you notice any error codes, odors, or other strange functions prior to this issue? If you are still having these issues and can think of anything in particular, please feel free to reconnect. Hope this helps!

Apr 07, 2014 | Frigidaire FPGS3085KF Professional 30"...

1 Answer

Main oven does not heat at all


Sounds like the heating/starter element went out. This item is very delicate and will break if touched. They are used on almost all newer gas appliances. It takes about 3 minutes to check. Turn the oven on and look down near the burners with all of the lights in the room out. You should see a glow for a while, then it will click off for a while and then come back on. If not, then turn off the oven and get a flashlight and look for the starter element to see if it is broken. It is about one inch wide, two inches long, and 1/4 inch thick. If you do get a glow then this is good news, the element is not broken. However, the element operates a thermostatic switch which operates the gas valve. This switch may be broken. The switch and the starter element usually come out together when removed.

Jan 13, 2014 | Thermador PRL486EDPG 48in Pro-Grand LP...

1 Answer

Frigidaire stove oven want come on model # FGF368GSJ


Hello Larry D Harris - Does any part of the range work? I would recommend verifying that a fuse is not blown or a circuit breaker tripped. Test the power outlet with a lamp, hair dryer, etc. Another questions, does "Loc" appear in the display if any button is pushed? The Oven Lockout feature automatically locks the oven door, prevents the warmer drawer and most oven controls from being turned ON. If so, press and hold CLEAR/OFF for 3 seconds. A beep will sound. LOC will clear. The "DOOR LOCKED" will continue to flash until the oven door has completely unlocked. Do the maintop burners work? Granting that it does, you can try confirming that the shut-off valve on the gas pressure regulator is in the "ON" position (usually located on the back left-hand side of the range). This valve shuts off gas to the oven. If after the basic troubleshooting, you continue to experience the issue I would suggest contacting a certified technician to assist in the full diagnosis and repair of your range.

Nov 06, 2012 | Frigidaire Stove/Oven/Range Cooktop -...

1 Answer

The power went out and then the elements and oven would not work but there was power to the clock?


This solution only really applies to oven elements only. I haven't experienced it with hotplate elements as they are not normally controlled by the timer. When you have an electronic timer and there is a blackout the timer normally reverts to auto. function when the power comes back on. You have to set it back to manual before the oven will work. Turn the oven element to ON and the set it to manual. The oven element indicator light will light and the oven will work.

Feb 06, 2011 | Stoves 23 in. Premier TC600I Electric...

2 Answers

How do you unlock a kenmore elite cooktop?


You can do this by:
Check the oven display to see whether the screen says "LOC." When "LOC" is displayed, the oven lock is activated and the door cannot be opened. You need to make sure it is locked so you do not mistakenly lock the door.

  • 2 Press and hold the "Stop" button on the oven control panel until "LOC" disappears from the display. Some oven models have a button marked "Oven Lock," which should be used instead of the "Stop" button.
  • Lock the oven again by pressing and holding the "Stop" or "Oven Lock" button until "LOC" appears in the display


  • Feb 03, 2011 | Kenmore Elite 44173 30 in. Electric...

    Not finding what you are looking for?
    Jenn-Air JED8430 Electric Cooktop Logo

    Related Topics:

    187 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jenn-Air Cooktops Experts

    yadayada
    yadayada

    Level 3 Expert

    77169 Answers

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers

    Paul Carew

    Level 3 Expert

    2820 Answers

    Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...