Question about Pure Digital Flip Video Ultra Camcorder

2 Answers

When trying to download my videos, I go to my flipshare icon and double click. It says windows has detected a problem and I need to close the window. I have tried restalling the software. Any other suggestions?

Posted by on

  • Shorn430 Aug 30, 2010

    I have tried both USB ports on this computer. Same error message.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,083 Answers

Sometimes you can try a different usb port, and that will work. If that doesn't work, you can take the memory card and use a card reader, and it will be detected as another drive, with the DCIM folder and video files. From there, you can transfer them to a folder on your desktop easily, just select all, right click, drag and drop, and select "move" (this will simultaneously erase them from the card).
You may have a bad cable, or some other problem going on with the unit.
Anyway, good luck, hope this helps, and thanks for using FixYa.

Posted on Aug 31, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,566 Answers

Have you tried plugging the USB into another USB port? Does this happen on all computers you cannot your camcorder with?

Posted on Aug 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I try to open flipshare on my computer, I keep getting a message saying (error)that says C:\users\pictures\setup_flipshare.exe is not a valid Win32 application. I have tried to uninstall all...


get and download revouninstaller ive linked to a portable version (http://portableapps.com/apps/utilities/revo_uninstaller_portable)

install that and open it.

let it find flipshare in the install programs,right click on flipshare and click uninstall.click ok for uninstall and select moderatesi

let it do its thing

restart your computer

redownload flipshare using a browser with a better download manager(chrome/mozilla firefox)

install it

Mar 07, 2011 | Computers & Internet

1 Answer

How do you turn off the motion detection on a logitech C160


1
Launch the Logitech QuickCam software by either double-clicking the QuickCam icon on your desktop or clicking the QuickCam icon in your system tray.

2
Click on the QuickCapture icon to launch QuickCapture.

3
Select the video size that is needed by clicking on the small arrow where it says "Video Size" to the lower right of the picture.

4
Click on the arrow on the button that says "Record Video" to open the Video Options window.

5
Clear the check mark next to "Enable Motion Detection."

Mar 07, 2011 | Logitech 13MP WEBCAM C300

1 Answer

I cannot get the newest videos on computer. I get the first videos repeatedly and not the latest. I tried to save but am having trouble. I assume the Flip has to be ON when attaching to Computer?? What...


connect the camer aand close flipshare if it opened, connect the open the camera as a drive (in my computer on windows, or on the desktop in mac os) and copy the DCIM Folder somewhere you can find it, disconnect the camera, open flipshare, click help, Recover other flipshare files, and choose the dcim directory you copied to the computer(if the video files are in a subfolder, choose that instead)

Feb 15, 2011 | Flip Video Flip UltraHD 8GB High...

2 Answers

COMPUTER CRASHED I NEED TO RELOAD CD BUT I DONT HAVE ACCESS CODE


There are now several versions of the basic Futura software and AutoPunch available on the market. The most current is version 1.0.0.2. To determine what version of either software you have, you will find this information around the inside rim of the CD at approximately 4 o'clock. Before loading any of the Options into your computer, check the version and then follow the steps below. The following steps will update your software so that you will now have the latest 1.0.0.2 version of the basic program and all options.

To load base software 1.0.0.0 with AutoPunch 1.0.0.0 or base software 1.0.0.1 with Autopunch 1.0.0.1

  • You must use bobbin part number 085128. This bobbin is specifically designed for the Futura CE-100 and CE-200.
  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off the machine
  • Install Autopunch and leave the CD in the tray
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program

To load base software 1.0.0.0 with AutoPunch 1.0.0.1 or base software 1.0.0.1 with Autopunch 1.0.0.0

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off the machine
  • Install Autopunch and leave the CD in the tray
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program

To load base software 1.0.0.0 or 1.0.0.1 with Autopunch 1.0.0.2

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close software and turn off machine
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Install Autopunch using Installation Wizard - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.2 with Autopunch 1.0.0.0 or 1.0.0.1

  • Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and turn off machine
  • Place Autopunch CD in tray but CANCEL Installation Wizard
  • Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop download icon to install update
  • Turn on Futura Machine and double left click to open the program
  • Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.1 with Autopunch 1.0.0.1 with Hyperfont 1.0.0.2 or Photo Stitch 1.0.0.2

  • Load Base software (have the machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off the machine
  • Install the Autopunch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in the Access code from Autopunch jewel case and then left click on the check mark to open program*
  • Close program and then turn off the machine
  • Download appropriate update for Windows version from the Futura-Support.com updates and save to desktop
  • Double left click on the desktop icon to install update
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off the machine
  • Install HyperFont program - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from HyperFont jewel case and then left click on check mark to open program*
  • Close program and then turn off the machine
  • Install PhotoStitch program - leave CD in tray
  • Turn on Futura machine and double left click to open program
  • Type in Access Code from PhotoStitch jewel case and then left click on check mark to open program*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

To load base software 1.0.0.2 and adding all Options - Hyperfont 1.0.0.2, PhotoStitch 1.0.0.2, Autopunch 1.0.0.2 and Cross Stitch 1.0.0.1

  • Install Base software (have machine set-up for embroidery with USB connected to both the machine and computer- machine turned OFF)
  • Turn on Futura machine and double left click on Futura icon to open program
  • Close program and then turn off machine
  • Install Autopunch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from AutoPunch jewel case and then left click on check mark*
  • Close program and turn off machine
  • Install Hyperfont program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from HyperFont jewel case and then click on check mark*
  • Close Program and turn off machine
  • Install Photo Stitch program and leave the CD in the tray
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from PhotoStitch jewel case and then left click on check mark*
  • Close program and turn off machine.
  • Install Auto Cross Stitch program and leave CD in tray
  • Download appropriate update for Windows version from the Futura-Support.com updates (Fut_sp2_Options.exe) and save to desktop
  • Double left click on the desktop download icon to install
  • Turn on Futura machine and double left click on Futura icon to open program
  • Type in Access Code from Auto Cross Stitch jewel case and then left click on check mark*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

Dec 11, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Download videos


Plug the USB data cable into the and connect the opposite end into one of the USB ports on your computer. The computer states it has detected a new device.

Launch the Sony Media Manager program (either double-click the desktop icon or select "Start," "All Programs" and finally "Sony Media Manager"). The program automatically detects the device.

Select the "Videos" tab, and then click-and-drag a video file into the open window from your computer. The video file location on the computer may vary, depending on where you saved the content to.

Wait for the video files to upload to the (the video files automatically begin uploading to the device once you drag the file into the open program window). Do not disconnect the device from the computer while the upload is being performed. If you do, you may corrupt the device. Once the upload has finished, you may close out the program and disconnect the MP3 player from your computer.

Aug 31, 2010 | Sony NWZS716FSNC Digital Media Player

1 Answer

I downloaded Flip video to my tower computer and later I downloaded it to my hp laptop with Vista. Flipshare didn't like two sites, so I uninstalled both progams and tried to install only in my laptop with...


Google a program called
Video Download Studio
then you can use it FREE download video or audio form YouTube, google, metacafe, redtube, dailymotion etc. attention: download function is no need to register
you can also use it to convert video to audio, video to video, audio to audio.
use it convert video to mp3 mp4 for your iPod
tutorial;
http://www.downloadvideos-convert.com/how-to-use

Jan 05, 2010 | Pure Digital Flip Video Ultra Camcorder

2 Answers

Kodak esp7 all-in-one-printer with erro 1-2070 how do i fix the problem


Try to install the latest version of Printer software[4.2] from www.kodak.com/go/downloads on your computer. then open the kodak home center software and click on scan pictures. Adjust the settings and you are ready to go. download the user manual from www.kodak.com/go/manuals.

Jun 30, 2009 | Kodak ESP 5 Printer

2 Answers

Flip software (Flip Share) quits unexpectedly on my Mac 10.5.6


HERE IS WHAT FLIP VIDEO SENT FOR A FIX:
Dear Suzie,

Thank you for contacting us.

We will need to try to uninstall and reinstall the FlipShare program on your Macintosh computer. To do this please try the following:

1. Please open your HD and in the search field type “3ivx”. Drag all 3ivx files into your trash can, and empty it. To uninstall FlipShare on your Mac, please go to MacIntosh HD > Library > Application > Support > Flip Video > FlipShare Uninstaller
2. Reboot the computer

If you are receiving the message, "Unable to update database file," when upgrading to FlipShare 5.6, there may be a corrupted file within your existing FlipShare database.

Please try the following to upgrade to the current version of FlipShare and import your videos into the application.


1. Copy your entire FlipShare Data folder onto your desktop or another drive
- the FlipShare Data folder can be found in "Username">Movies>Flip Share Data>
- ensure that you have copied all of the contents of the FlipShare Data folder and have secured a complete back-up of this file

2. Delete the FlipShare Data folder from your "Username">Movies>Flip Share Data>

3. Uninstall FlipShare
- MacIntosh HD > Library > Application Support > Pure Digital Technologies > FlipShare Uninstaller

4. Reboot your computer

5. Click on the link and follow the on-screen instructions to install FlipShare 5.6 onto your computer

For Macintosh systems (including Snow Leopard): http://download.theflip.com/update.theflip.com/app/fvsw/561/update/Setup_FlipShare.dmg

6. Once FlipShare 5.6 has fully installed, launch the program

7. Go to the Help directory and choose "Recover other FlipShare files..."

8. Click Proceed and select the Videos folder of the drive where you saved your FlipShare Data folder
- the FlipShare Data recovery tool will import your videos into FlipShare


Should the issue persist, please do not hesitate to contact us again so we may further troubleshoot.


Thank you,
Flip Video Support

May 05, 2009 | Pure Digital Flip Video Ultra Camcorder

15 Answers

Flip share video application unexpectedly quits


Solved - I had the same problem.

The original "Flip Video For PC" software that came preinstalled on my Flip worked fine. But after being nagged to "upgrade" to FlipShare, I experienced the same crash problem mentioned here. Even worse, the FlipShare installation nuked the original program files from the Flip!

In my case, I think my computer's processor did not meet the minimum system requirements of the newer FlipShare software. The original "Flip Video For PC" software requires a 2Ghz P4 or higher; the FlipShare software says it requires a dual-core 4Ghz or higher. So when the FlipShare software tries to load the ippvideodecoder.ax module on an under-powered processor, it just crashes. Bad design.

I bet that most of the people posting this same problem here have processors that are "borderline".

Anyway, here's how to get the original Flip Video software back and re-install it on your computer:

Disclaimer: I assume no responsibility if you screw up your Flip or lose your videos. I can only tell you this method worked for me.

1) Use Control Panel, Add/Remove Programs to uninstall FlipShare and 3vix.

2) Download "Flip Video For PC" v3.7 from here:
http://www.theflip.com/app/prius/37/update/

3) Follow the written instructions here for formatting your Flip and reinstalling the software:

http://www.youtube.com/watch?v=JYc8N3dmxhU

Important: this guy tells you how to back up any existing videos on your Flip BEFORE you format it.

After formatting, I had some initial trouble with the installation not finding my (empty) Flip. Here's a workaround: the installation creates a folder called "FlipVideo Updater Support Files", and within that a subfolder called "files_to_install". Copy the entire contents of that subfolder to the root of your Flip. Re-run the installation and it should now be recognized.

4) Bonus: once you've got the old software reinstalled and working, you may want to disable the annoying "Upgrade To FlipShare" nag screen that bugs you every time you run the software. Simply browse your Flip and delete the following file:

[drive letter]\System\VIEWER\PD\checkForUpdate.txt

No more nag screen!

I hope this info is helpful to those who experienced the same problem. Flip tech support people are absolutely clueless.

best,
JohnB

Dec 25, 2008 | Pure Digital Flip Video Ultra Camcorder

1 Answer

Help


wireless and the the internet ,fuckin night mare.ok double click on wireless icon if you can access configuration youre using wireless utility config,if you cant youre using windows config.
double click on wireless network icon ,click properties,goto wireless networks check(put tick)use windows config.close.navigate to internet options click connections make sure never dial is clicked .click lan settings .tick use proxy server then click bypass proxy server then untick use proxy server.click detect settings.close.click advanced scroll down to ssl and tls make sure all three are ticked this should solve your prob.you could update your IE also.

Jan 10, 2008 | Acer Aspire 3610 Notebook

Not finding what you are looking for?
Pure Digital Flip Video Ultra Camcorder Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pure Digital Video Cameras Experts

Rommel Balcita

Level 3 Expert

749 Answers

sharky633
sharky633

Level 2 Expert

510 Answers

tomikles

Level 1 Expert

35 Answers

Are you a Pure Digital Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...