Question about Intex Automatic Salt Water System for Above Ground Saltwater Pool

2 Answers

The Service light is on my saltwater generator, no codes...just the service light, and I've lost my manual. What should I do?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 297 Answers

Service light is not consumer fixable
you need to call intex and request a warranty form that they will e-mail you
Fill it out and fax back to them
it must be under 2 years old and you must have a valid receipt
one will be at your door in a few days

Posted on Aug 31, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Ok Dont listen to this guy, this is the whole point of the site is to help people fix stuff, he probonly works for intex. i see he has posted this on a bunch of times.

If its in warrenty call them they will send you a new one, if its out of warrenty check your circuit board for corrision. to do this UNPLUG the system, take the 4 screws out of the peice with the display on it and pick it up there you will find a circuit board. Mine had a corroded resistor. i went to radio shack found a new one (a two pack for $1.50) soldered it on good to go works great. This seems to be a common problem i have read online.

Posted on May 19, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My generator first indicated low salt. I've added plenty of salt, and it still indicated low salt. I turned it off for 24 hours, and tried it again, now it has the service indicator light on,what next ?


We've found with our saltwater system (which doesn't have a service light, so not the same model as yours) that we have to add far more salt than we expect before the 'low salt' indicator goes off. It also seems to be very tempramental whenever it's been off for a while (such as over winter) & needs to run for very short bursts at first before working up to normal operating times.

Aug 02, 2013 | Intex Automatic Salt Water System for ...

1 Answer

Manual for a urc4021b00


Hello
I've the user manual for your remote control URC-4021. It includes operating instructions to synchronise it with different devices, including setup codes. I can't send it to you by this window. You've to buy one amoung my services advertised on Fixya site. Unlike old Fixya site, the now has no facility to upload PDF files. If you want to get, the user manual, a printable version, you have ot buy one amoung my services. You can get my services by Google. Type in "gopakumarg43" in Google search box, and click on the link. You can see the advertised service of mine there. Select the Universal Remote Codes service and proceed. When you've finished, Fixya will provide a link between us, thorough which I can send the manual to you. OK.

Nov 11, 2011 | Televison & Video

1 Answer

What is the recommended end-of-season maintenance for the chlorinating pump?


According to the Intex website, the following maintenance is required for this product:

The Intex Saltwater Pool Systems are designed to operate with a minimum amount of maintenance. It is recommended to always turn the pump on prior to turning on the Saltwater Pool System (see Owner's Manual) unless the chlorine generator is part of a combination pool and filter set, to ensure that air pockets are eliminated from the hoses, and that water is flowing through the unit. In addition, the electrolytic cell should be examined and cleaned if necessary. The frequency of cleaning will depend on the local water conditions, pool usage conditions, and length of time the Saltwater Pool System is operated each day. (See Owner's Manual.)

The Intex Saltwater Pool Systems contain several features that minimize maintenance requirements:

1.) An automatic self-cleaning cycle: The Saltwater Pool System automatically undergoes a self-cleaning cycle to maximize the operating length of the electrolytic cell.

2.) Safety diagnostics: the Saltwater Pool System will alert the operator to three conditions that could result in poor operation: Low water flow through the unit, Low Salt level in the pool water, High salt level in the pool water. If any of these conditions exist, the system will sound a buzzer, and flash a digital code on the control panel (Model 8110) or a Red LED will light up. (Model 6110).If the condition is not addressed, the system will automatically shut itself off to prevent damage to the unit.

Sep 11, 2011 | Intex Automatic Salt Water System for ...

1 Answer

On my intex salt generator I am getting a flashing code 93, can you tell me what that means? I lost my book.


Code 93 means "Stand-By Mode (Operating processed Finished).. Here's the link for Intex manual search and download... Find your model and click on the American/British flag to download.. Be patient, takes a little while to download...
Good luck and please take the time to write a comment or rate...
http://www.intexcorp.com.hk/proifv/proifv_dl_client.jsp?hid_windowname=null&lst_docsea=2011&source=intexstore&gid=2&lid=14313&hid_windowname=null

Aug 24, 2011 | Intex '10 Saltwater System Pool Chlorine...

1 Answer

Have an intex 16 x48" salt water pool generator


I checked the Intex web site and here is what they said:

There are several things you may need to check and do:

- Test the salt level first with Test Kit, and add salt as needed.
- Remove the electrolytic cell for inspection and clean it if necessary.
- If code 91 still appears despite the above steps, there might be a possible electrolytic cell
failure. Please contact Intex Service Center, and replace the cell if needed.

NOTE: Always turn the power off and disconnect power cord before cleaning and servicing.

I hope this helps.

Aug 24, 2011 | Intex Automatic Salt Water System for ...

1 Answer

Cs8110 service light keeps coming on.


"Contact Intex Service Center" No instructions to repair this LED light code

Jul 20, 2011 | Intex Automatic Salt Water System for ...

3 Answers

Intex Krystal Clear Saltwater Water Sanitizing System


Code 93 means the system is in Stand By (Operation Finished) mode. It will start the next cycle in 24 hours and run for the number of hours you have set, Codes are: 88 Stand By (Start Up) 00 Zero Operating Hours 01 Min Operating Hour or (1 Hour Remaining) 02 thru 12 Operating Hours remaining 90 Alarm Code (Low Water Flow/No Flow) 91 Low Salt Level 92 High Salt Level 93 Stand By Mode (Operating Process Finished)

May 30, 2010 | Intex Automatic Salt Water System for ...

2 Answers

Red service light is on. I have cleaned and


Have your salt leavel tested to be sure it's not to low or to high.

Mar 27, 2010 | Intex 2000 GPH Salt Water Filtration Pump...

3 Answers

My intex saltwater chlorine generator & filter beeping forever!!!


hello our pool chlorinator keeps comming up low salt 91 no matter how much salt we put in this is frustrating why is this happening ,,,please help

Jun 06, 2009 | Intex Automatic Salt Water System for ...

Not finding what you are looking for?
Intex Automatic Salt Water System for  Above Ground Saltwater Pool Logo

1,455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intex Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Mike

Level 3 Expert

4336 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Intex Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...