Question about Maytag MAH2400A Front Load Washer

1 Answer

Mah2400 wont turn on after coins taken out of pump , display ok and hear the door lock but nothing

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Make sure all connections are secure. My coins sheared the blades off the pumpe and it had to be replaced...more than a few coins to replace :(

Posted on Jul 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The machine shows E07 error upon entering the service menu.


Door latching or lock error
·Door not detected closed
·Check door is closed
·Check door catch and latch
·Check door lock wiring
Check door lock

Dec 11, 2015 | Blomberg Washing Machines

1 Answer

Candy Go482 wash machine will not start its cycle.door security light flashing but no obstruction


It could be a bad door lock switch. I had taken my machine apart to clean the boot and accidentally dislodged one of the plugs (there were 3 on the mechanism) on the door lock mechanism. I got the same actions from my machine as you are. Since you probably haven't taken anything apart, a bad switching mechanism can cause the same problems.

Aug 25, 2015 | Washing Machines

1 Answer

Splendide Model WD 802 . Would not drain water.


I have a Splendid Washer/Dryer combo Model # WD802.
The water is not draining. I have taken the filter out, cleaned it, still does not drain. Gets to the drain cycle and does not go any further. Same in every cycle.

Anyone with suggestions for repair ? Thanks

Aug 01, 2011 | Washing Machines

1 Answer

I have a kenmore oasis top load washer and when the water is pumping out I hear a loud rattling sound like a coin is stuck or something. I have already taken the inner basket out and found nothing but an...


i would say its definitly a coin have you pulled the pump appart to expose the blades? this is were i would expect to find it

ps well done on taking out the barrel thats a hard job if not trained.

best of luck

Dec 02, 2010 | Washing Machines

1 Answer

Our Dyson CRO1 front load Washer can not empty holes and complaining of coin stack in there. We have checked but there is coin in there, can you please help us?


if your machine runs ok until this point then try giving the filter cover a gentle tap
my machine had this problem due to the pump jamming
there was nothing in the coin trap but the pump itself was jamming i fitted a replacement pump it now works ok.to open the cointrap. you will need the dyson spanner or a small flat screwdriver to lift the lock on the cover it then unscrews anticlockwise. more information can be found in the instruction manual
if you have lost or mislaid them a download is available on the dyson web site
if you are unsure how to repair your machine a call to dyson will be needed
they will repair and test your machine

Nov 05, 2010 | Dyson CRO1 Front Load Washer

3 Answers

SMALL LOCK APPEARS IN CONTROL BOX AND WONT ALOW


That lock icon indicates a locked door, and if you can open your door with it locked, your door lock will need to be reset. Your instruction manual should have your reset procedure listed in back. But if your door IS locked, you will need to manually drain out the water before it will open.

Mar 18, 2010 | Samsung WF328AA Front Load Washer

1 Answer

Machine wont start


Go back through the process that you performed. You may have miss a step of not connected somthing. Also you may want to make sue there is nothing in the pump. If a pingpong ball was in ther ther also may be some coins.

May 28, 2009 | Washing Machines

1 Answer

Washer fills wont spin out or drain water


I had the same problem. After releasing the door and removing the wet clothes, I siphoned the water from the drum. Make sure that the water is turned off and the machine is unplugged, Then I opened the large black cap behind the round white cover on the surface. Be prepared to capture about half galon of water. This is the opening to the drain pump. In my case, there were some toys from my kids which had stuck in the turning part of the pump. I removed them and replaced the cap to the pump. Everything seemed to be OK after that.
I hope that this helps. Please be adivsed that I am not a repair person and proceed with caution and use common sense when dealing with electric appliances.
Good Luck

Sep 21, 2008 | Bosch Nexxt 100 Series WFMC1001UC Front...

3 Answers

Problem with Maytag MAH2400 AWW


As for the user whose machine will not drain and sounds as though a chain is clanking, the solution is probably a coin caught in the drain pump. I just had the same problem. Access the pump from the bottom of the machine. 4 screws hold the mounting bracket on undo those, the electrical connection and two hose to the pump. Undo three screws holding impeller to motor and coin can fall out. Examine for damage if it is not too tore up, put back together. Keep in mind that when you unclamp the hoses that water will come out.

Dec 28, 2007 | Maytag MAH2400A Front Load Washer

Not finding what you are looking for?
Maytag MAH2400A Front Load Washer Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...