Question about Pioneer Elite® VSX-01TXH 7.1 Channels Receiver
The light is an ledt they very rarely go bad ..to confirm its bad you must first see that the led is getting power --a voltmeter one end to the frame of the unit and the other to either lead on the led will confirm if its bad or not a typical led will run on or near 3 volts dc... if theres no power at the led than the problem is elsewhere
Posted on Aug 30, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 18, 2016 | Pioneer VSX-518-K Receiver
Jan 10, 2013 | Pioneer VSX-305 Receiver
Jul 05, 2011 | Pioneer VSX-C300 Receiver
Resetting the main unit
Use this procedure to reset all the receiver's settings to the factory default. Use the front
panel controls to do this.
1 Switch the receiver into standby.
2 While holding down the TONE button, press and hold the STANDBY/ON button for about three seconds.
3 When you see RESET? appear in the display, press ENTER .
OK? shows in the display.
4 Press SYSTEM SETUP to confirm.
OK appears in the display to indicate that the receiver has been reset to the factory default
Mar 04, 2011 | Pioneer VSX-815-K Receiver
Jul 30, 2009 | Pioneer Audio Players & Recorders
Jun 10, 2009 | Pioneer VSX-D704S Receiver
Jun 18, 2008 | Pioneer VSX-915 Receiver
221 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: