Question about ID Tech Omni Slot Reader Barcode Scanner

1 Answer

Reader not scanning cards correctly

I have an Omni Combined bar code and magnetic stripe reader. When you swipe a card, it more often than not does not read the numbers correctly. They will be backwards or add digits. In reading the Quickstart manual, it says some computers are expecting the data rate from the keyboard port to come in at a keystroke rate, and might not be able to accept it as fast as the reader is transmitting. Try adjusting the intercharacter delay to simulate the effects of keystroke delays.
I have no clue how to adjust the intercharacter delay.
Any help would be greatly appreciated.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I've already contacted the vendor of the application to make adjustments to the data rate in his program. I believe this is a software issue rather than a hardware problem.
It took me alot of reading and searching online..... no tech support came through for me.

Posted on May 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't it scan?


usually you need to configure the reader to tell it what kind of barcodes you want it to read and how to interpret & output the codes to your computer (whether you need prefix or suffixes to your codes( for automation))

the user manual for the reader has some bar codes to configure the settings for the scanner.

Jan 27, 2016 | Zebra Symbol LS4278, Bluetooth, Blood Bank...

1 Answer

MAGTEK 30050400 SIGNATURE PAD SC PINPAD 3 TRACK MAGNETIC STRIPE CARD READER


I was just researching this and from what I can find, that code means that the internal tampering sensor has been triggered, meaning the your device is no longer usable. It either has to be repaired or replaced by MagTek.

Feb 08, 2014 | Magtek IPAD Payment Terminal

2 Answers

MC9190 will not scan a certain barcode, but the MC9090 will, what could be the problem?


Hi,
Firstly you need to know exactly what 'symbology' or type of barcode you are trying to scan. E.G. 128CODE, ect.
Once you know this make sure 'DataWedge' is installed and go to the settings section of the software.ensure that the type of barcode you are printing is selected in the settings. After this is should work.


regards
Dave (Pen Mobile) Germain

Jan 28, 2013 | Zebra Symbol Technologies MC909X-G Series...

1 Answer

123scan - leanguage problem


http://www.motorola.com/web/Business/Products/Bar%20Code%20Scanning/Bar%20Code%20Scanners/General%20Purpose%20Scanners/DS9808/_Documents/_Static%20files/SYMBOL%20DS9808%20Quick%20Start%20Guide.pdf
there are bar codes for the country you are in underneth programing bar codes 3rd one down in the 3rd colom

if this helps you out pleazse take a moment to rate this. anything else i could assist you with?

Jan 14, 2013 | Symbol DS9808-SR00007NNWR - Motorola...

1 Answer

Dont no how to get my photos from card reader too my laptop


An USB memeory card reader should have several slots to insert the various memory cards.
You insert the memory card into the correct slot on the card reader and then connect the CARD reader with the USB cable into the USB port on your computer.
The computer will see this as an external storage device, you can then copy the photos off the memory card into your computer.

Jun 30, 2011 | Computers & Internet

1 Answer

Why doesnt my sd card reader work? I put in my gateway laptop and it doesnt work nothing pops up??


You might just have a bad SD card. Also, if you bought a card that is 4gb or more then you need a SDHC card reader. The HC stands for High Capacity. Look at the card to see if it shows HC under the SD. If it does then you need to find out if your card reader can read SDHC. If it can't then you need to go buy a new card reader that can do SDHC.

Jan 28, 2011 | Computers & Internet

1 Answer

Hello, I have the Motorola LS3478-FZ barcode reader and am having a strange problem. This is a wireless reader, and the cradle is plugged in via USB. The reader seems to scan any barcode I give it,...


Hello Mathew,
the USPS barcode is the GS1 128 (Code128) that will help you by activating accoring to the manual. Please be sure that you enable all lenghts of the Code128 barcode. That is probably the issue.

Aug 19, 2010 | Zebra LS3478-FZ Handheld Rugged Cordless...

1 Answer

Sir i have booked 3 tickets from air inida express through online in that i have entered my passport number wrong whethere it may cause any problem for me on travel can u help me


Yes it could do, if this website you ordered your tickets from has a support link, such as contact us, click on it and look for a phone number or email address and contact them, hope this helps

Feb 06, 2010 | Zebex ZBA AIRLINE TICKETS MAGNETIC SWIPE...

1 Answer

Bar code reader cannot be recognized by the computer


i think it is a softwere problem .once a time you reinstal same bar code reader driver, thanks

Jun 16, 2009 | PSC Duet RS-232 Handheld Barcode Scanner

1 Answer

The problem with reading the barcode


Be sure the Flic scanner is set to the factory default configuration by scanning the Defaults bar code given above. Then check the Format options for Characters to Strip and Characters to Append (see page 10) and make sure these are set correctly. In order to scan the ?Factory Defaults? bar code in the Flic Operator?s Guide to reset your Flic scanner to the default settings: Select Flicware , Tools , Format and add the appropriate control character(s) in the Characters to Append box. Good luck.

Dec 05, 2005 | MicroVision Development HS2121-MV

Not finding what you are looking for?
ID Tech Omni Slot Reader Barcode Scanner Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top ID Tech Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

kakima

Level 3 Expert

98758 Answers

Are you an ID Tech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...