Question about Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Gold Quiet partner 3, water standing in the bottom and no power on door. breaker is good, put a meter on incoming power and have voltage

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,430 Answers

This could be several things, thermal fuse , door switch, or main control. Here is a couple links to help narrow it down. http://appliancehelponline.com/dishnopowervideo.html
http://appliancehelponline.com/dishwasherhilimit.html
http://appliancehelponline.com/dishwashervideos.html

Posted on Aug 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Quiet partner V Dishwasher will not start no lights ,,,nothing


Try unlatched door and hit heated dry, normal, heated dry, normal all within 3 seconds of each ither. Close dior, latch and try again.

Mar 02, 2015 | Whirlpool Gold Series Quiet Partner Iv...

1 Answer

Quiet partner whirlpool III gold reset


TRY A RESET CODE
Press the "Sani Rinse," "Heated Dry," "Sani Rinse" and "Heated Dry" buttons on the dishwasher's electronic control panel in quick succession to put the appliance in diagnostic mode.
Close the dishwasher door and engage the door latch.
Wait 10 seconds before pressing the "Cancel" button to reset the dishwasher.

Dec 18, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

Whirlpool quiet partner II stops running or won't complete it's was cycle, sometimes is will wash for a few minutes and stop or it will stop before the water even starts to flow.


I had the same problem with my dishwasher. After hearing that the motherboard was the problem I decided to take a closer look. There were two capacitors (1000 microfarads, 6.3 volts) that looked a little suspect. The tops of capacitors should be flat...these looked like soda cans that had been left in the freezer. Got on eBay, located the capacitors for roughly $3 and $4 shipping, for approx total of $10. Soldered the two new capacitors into the motherboard and put it back together. As soon as I closed the door, the dishwasher started draining the water. When I ran a Normal cycle it completed successfully. Saved myself over $120!

Aug 02, 2013 | Whirlpool Gold Dishwasher with Quiet...

1 Answer

Whirlpool quiet partner ii dishwasher has quit working. Power is getting to the dishwasher but it is not coming on at all. There is water standing in the bottom of it and a very foul smell is present.


This dishwasher has a thermal fuse that attaches to the main control board that may have failed, it can be tested with a meter for continuity if it does not have continuity then it is your problem.

Apr 21, 2012 | Whirlpool Dishwashers

1 Answer

Same problem. 2-3 inches of water left in the dishwasher at end.


Inspect for plugged drain screen. Sometimes you have to take apart the bottom area for access...

Sep 18, 2009 | Bosch 24 in. SGS47E02 Exxcel Free-standing...

1 Answer

Quiet partner ii just stopped


Most likely it has an internal fuse or relay gone bad. Check the curcuit w/ a "glow stick" power identifier available at Lowes or Home Depot.

Aug 20, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool Gold Quiet Partner Dishwasher - Leaking!


Hello Summers2Go! We are terribly sorry to hear of your concern with your Whirlpool Dishwasher. Please respond back to this email address Whirlpool_Reviews@Whirlpool.com with your name, reviewer name (Summers2Go), phone number, street address, zip code, model & serial number, and date of purchase on the appliance. We would be happy to assist you. We look forward to your reply.

Jun 18, 2017 | Whirlpool 24 in. GU2500 XTP Built-in...

2 Answers

Whirlpool gold quiet partner iv will not turn on there is no sign of life in it at all.


Hi chrslndsy,

I'm Harvey the Master Plumber.

Your problem is: whirlpool gold quiet partner iv will not turn on there is no sign of life in it at all.

Usually this indicates that the power is disrupted. First check the breakers. 9 times out of 10 it's a broken, loose or burnt connection in the d/w junction box. It's located underneth the d/w behind the kick plate on the right or center, depending on model. Turn the power off at breaker and remove cover. Take each wire nut off and repair/replce as nessessary. Test before you close it up.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Oct 13, 2008 | Whirlpool 24 in. GU1500XTLS Stainless...

Not finding what you are looking for?
Whirlpool GU2400XTP Built-in Dishwasher Logo

688 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4336 Answers

Owen Barnes

Level 3 Expert

867 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...