Question about Motorola Mobility Moto Q

1 Answer

My moto q classic is stuck in a flash mode it says. its a black screen that pops up saying, motorola flash mode bootloader version BOOT_C_03.08.00R_MPAP charger connected please connect the usb cable. How can i fix this? i cant even use my phone

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

Your system software / firmware has become corrupted. You need to download and install replacement firmware for your phone. You need to choose the correct firmware for your exact model and service provider / carrier for it to work.

I wrote fixya tip on how to do this a few months ago, the links are below. But don't use the verizon firmware unless verizon is your carrier - get your carriers firmware from Motorola's MotoQ website.

Or, just take it into your service providers store and get them to do it.

I hope that helps.
________________________________
Motorola MotoQ Manual Download
Motorola MotoQ Update Manual Download
Motorola MotoQ Verizon Firmware Update Download

Posted on Aug 30, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: the screen of my mobile

I have a black spot of my screen!!!!!! And its getting Bigger!!!!

Posted on Jun 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a motorola Q just over 30 days ago. The phone has been working great up until a few days ago. Then it totally went to a black screen with letters that read: Motorola Flash Mode Bootloader Version...


you going to have to take it back mine if so wired it work then it doesn't if i were you take my advise get a different one. you just can rely on it

Nov 30, 2010 | Motorola Mobility Moto Q

1 Answer

Unlock


I should first point out that there are other options to unlocking yourself, since this option is a bit more involved and can seriously mess up your phone:

1) You can get the unlock code from your provider for free if they are prepared to give it to you. If they are then that is the safest and best option.
2) For $25, you can use TheMotoGuide's unlocking solution which is instant and guaranteed.



That being said, here's directions on how to unlock the phone yourself:

*You need to downgrade your boot loader to 7.D0, be aware that this can be risky.

* You may find afterwards that when starting in bootloader you have only a blackscreen, so long as the phone works ok and you can connect in bootloader that is nothing to worry about

* Ensure your phone is fully charged before starting. I recommend before beginning you first make a backup of your phone as described in the back it up section. Especially the PDS back up. This assumes all necessary drivers are already installed.

1) Start in bootloader mode (hold # and * while powering on)
2) Identify your current bootloader (e.g. 8.26 or 7.E0)
31-05-06_0118.jpg
3) If you already have bootloader 7.D0 skip to step 6

4) Download bl_826-828_to_07d0_for_V3_by_Archy.V2
5) Flash with this file using RSD Lite (described at the Flashing and Flexing section)

6) Download and extract the MOTO UNLOCKER SOFTWARE
7) Start in bootloader mode (hold # and * while powering on). In bootloader mode after the downgrade it is not unusual for the phone to show a blank black screen with no info, don't worry, though, it is still in bootloader mode!
8) Open up Moto Unlocker and connect you phone

unlocker.jpg
9) Run Moto Unlocker click connect and yes! Once finished it will look like this:
unlocker-done.jpg

Congratulations, your Motorola Razr V3 is now unlocked

Jun 13, 2010 | Motorola Mobility RAZR V3

2 Answers

Verizona Motorola Q flashed for Cricket stuck in flash mode.


your software is corrupt and needs to be reloaded.

Jul 14, 2009 | Motorola Mobility Moto Q

3 Answers

Motorola flash mode bootloader version BOOT_C_03.08.00R_MPAP


I CANT DO ANY THING WITH MY MOTOROLA Q. IT HAS A BLACK SCREEN THAT SAYS MOTOROLA FLASH MODE BOOTLOADER VERSION:
BOOT_C_03.05.00R_MPAP

Nov 09, 2008 | Motorola Mobility Moto Q

1 Answer

Moto Q Problems


no have to

May 28, 2008 | Cell Phones

1 Answer

Flash Mode


Sounds like your device is defective and needs to be replaced. Time to look for your warranty info sorry to say

Nov 25, 2007 | Motorola Mobility Moto Q

Not finding what you are looking for?

Open Questions:

0 Answers

boot_c_03.08.00r_mpap Paul Sager from FixYa has posted a solution for this problem previousley (as below). I have tried the Motorola and Verizon sites (tried the store as well) and the software is not available to flash the phone. Do you know of a site that would still have it available? Or can this question be sent to Paul to further comment on it? All I want to do is recover the phone numbers, notes and calandar from the phone via Activesync or Windows. Paul Sager 2335 Solutions July 14, 2010 I can help you with your Motorola Moto Q. What has happened is that the firmware of your phone has become corrupted. When this happens your phone will no longer finish its boot sequence. This is a very common situation with many phones: in fact, much of what I do here at Fixya is explain how people can fix their MP3 players, GPS and phones by reflashing the firmware. The good news is that if you take your phone into your carrier's store, they can reflash it for you right there (if they have a competent tech handy.) If you are comfortable with computers etc, you can also do it yourself. Your computer will communicate with and fix your phone, even though it doesn't seem to recognize it right now - I've seen this many many times. My only warning for you is that if you are going to flash your phone yourself, you need to get the correct firmware from motorola's site for your carrier. I just downloaded the Verizon firmware as an example - Motorola's website has about ten different carrier firmwares for their MotoQ phone. I hope that helps.

Oct 09, 2012 | Motorola Mobility Moto Q

See all Motorola Mobility Moto Q Questions

Motorola Mobility Moto Q Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Computers & Internet Experts

David Payne
David Payne

Level 3 Expert

14161 Answers

 Paul Flint
Paul Flint

Level 1 Expert

12 Answers

Tom Chichester

Level 3 Expert

36514 Answers

Are you a Motorola Mobility Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...