Question about Printers & Copiers

2 Answers

Purchased CLP-300 colour laser printer. Disc provided will not install printer.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Open front cover and on left is a light grey "L" shaped item with a finger grip indent. If this item is not there, you will have to buy one (about $15 +-) If it is present, pull it out all the way then re-insert it with some force but do not john wayne it. try starting again. Dont forget to open and close both front and rear doors on the machine to reset the start process. If this doesn't help, a trip to service may be in order. Also, the toner tank can be emptied but it is a very messy deal, remove it, tip it upside down and shake. Probably best to do this inside of of a large trash bag and seal it around your wrist. the now empty container can be wiped off good with a damp paper towell. install and try again.. happy printing.

Posted on Sep 30, 2008

I changed all the toners and I get a message to please install waste toner tank?

Posted on May 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung CLP-300 Printer not printing black well


You need to take it a couple steps further after your test print. Sounds like your print heads need cleaning or your cartridge may need aligning. It's best to do this each time you install a new cartridge. get more information and help from here .

Jan 10, 2010 | Samsung CLP 300 Laser Printer

1 Answer

The printer will not pick up the paper!


Suggest you clean the pick-up rubber that lifts the paper.
And also lift up the front of your CLP-300 by about 3 inches. I put a box under the front. The paper will fed slightly downhill into the printer.
It works for me.
Richard

May 04, 2009 | Samsung CLP 300 Laser Printer

2 Answers

Printer Queue blocked by 'Deleting' problem


THere is an easier solution.
Restart the printer spooler service. THis solves problems very often

Jan 21, 2009 | Samsung CLP 300 Laser Printer

2 Answers

Need a free downloadable Samsung CLP-300 color laser printer user manual


you don't need the manual to do that you can do that in the setting of the printer on your pc
1 open control panel or if you have XP there is direct access from the start button
2 click printers and fax icon
3 right click the icon of the clp 300
4 click on the properties
5 click the setting tabs
6 in that page there will be a setting for the colour and you set that to B/W or colour this will set the printers default.

in most aplications that you use befor you print you get a print dialogue box with where you are to print to, and so on you can access the printer properties that way aswell and then just for that print job you can have B/W or colour

hope this helps

Jun 19, 2008 | Samsung CLP 300 Laser Printer

2 Answers

Colour print smears


Please remove imaging unit and transfer belt and make sure no paper is lodged above the transfer belt (ITB)

Dec 01, 2007 | Samsung CLP 300 Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...