Question about Westinghouse LVM-37w1 37 in. HD-Ready LCD Television

1 Answer

Remote control not working

Try univerisal remote nothing work.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 304 Answers

Have you program first the remote control, to work on your TV..??

Heres a few instructions how to programmed your remote..

  1. Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding MODE button (VCR) on the remote control, while illuminating on the selected component. Test the POWER button to see if the component responds properly. If not, the remote requires programming to operate the device.
  2. Turn on the component to be programmed, then press the corresponding MODE button on the remote control.
  3. Press the MENU and MUTE buttons simultaneously for 2 seconds, the button selected component lights on the remote control. If you don't press any button for 20 seconds, the button selected component will turn off on the remote control. At a moment, you have to repeat from step 2.
  4. Enter a code number using the number buttons on the remote. When pressing the button, the light is blinked at a time. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off.
  5. Press the MENU button to store the code. After blinking twice, this code is stored.
  6. Test the remote control functions to see if the component responds properly. If not, repeat from step 2.
Try 001 as the PCode.

Thanks..

Posted on May 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New universal remote will do nothing, I cannot even accomplish step one. Why?


Universal Remote Not Working - Cable One

support.cableone.net/app/.../a.../universal-remote-not-working

Cable OneEven if lights on the remote control are turning on, weak batteries may still cause ...Step 6: If these buttons do work, the remote control may need to be replaced.

Repair your remote controls - Instructables

www.instructables.com/id/Repair-your-remote-controls/

InstructablesYou do not need much experience in electronics repair to repair a remote. ... On a newLED, one lead is longer than the other; that's the positive (hot) lead. ... You may find that this fixes stubborn remotes where nothing else does :-) ..... Sometimes even after thorough cleaning, I still find some buttons not functioning and have ...

Logitech Harmony Elite remote control review - Tec


Dec 29, 2015 | Westinghouse Flat Panel Televisions

1 Answer

If I do not have the remote will a univerisal remote work with air tv


Should work. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts. Search the sites by type in the brand name to your device, in its search box. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

Oct 08, 2014 | Flat Panel Televisions

1 Answer

Remote control for 32" TV


If you try a universal remote, such as from cable company or satellite provider and it still does not work with remote, you need an IR receiver module #DUNTKE264FM02 for your tv. this can be found at encompassparts.com and retails for about $22.00

Jul 11, 2011 | Sharp LC-32SB24U 32 in. LCD TV

1 Answer

Lost remote want to use a univerisal remote but tv say front panel lock How do I unlock it? 32 in westinghouse


On the TV itself, MENU, SET-UP, INPUT, VIDEO then go to Channel lock and de-select it.
Hope this helps. If you post a model number, I can probably get you a manual.
Good luck, R.J.

May 13, 2011 | Westinghouse 32" Flat Panel LCD HDTV

1 Answer

Cant get the remote to work for menu options just started setting it up already programed to my direct tv remote now nothing is working or either remote t.v or direct tv remote


To diagnose a remote control problem follow these steps.

1) unplug the TV power cord, count to five and plug it back in. (reboot)
2) try to power on with ORIGINAL MANUFACTURER remote.

if that works- your TV and original remote are fine.

if that does not work:
4) try to power on with buttons on the TV itself- if it works- check your remote batteries and try remote again.

Direct TV and Dish Network remotes will ONLY operate SIMPLE function of your TV such as power, volume, input.
They will NOT access your TV menu.

Apr 12, 2011 | Flat Panel Televisions

1 Answer

Remote control work very slowly and sometime do not work


Please follow the troubleshooting steps:
  1. Remove the batteries from the remote control.
  2. Press each button on the remote control twice.
  3. Make sure none of the buttons on the remote control are jammed.
  4. Install fresh batteries into the remote control.
  5. Make sure nothing is blocking the Infrared (IR) sensor on the TV.
  6. On the remote control, press the TV FUNCTION button.
  7. Press the POWER button and other buttons to test the operation.
  8. Try using the remote control at varying distances from the TV.
  9. Power reset the TV by follow the steps:
  • Unplug the television power cord from the electrical outlet.
  • Let the television remain without power for 60 seconds.
  • Plug the power cord back into the electrical outlet.

Jan 09, 2011 | Philips 32PF9964 32 in. Television

4 Answers

Vur9 remote only controls the volume and nothing else, cant change channels or anything any suggestions?


Press the TV button on the lower right (not the upper right) to tell the remote to control the TV.

The upper buttons are the Input Selector buttons. The lower buttons are the Device Control Selector buttons.

I had this same problem until this dawned on me.

Apr 20, 2009 | Vizio VO47L 47 in. LCD TV

4 Answers

Vizio 50 inch plasma -- remote not working


You can also try to take out the batteries and push all of the buttons with the batteries out of the remote. Then put the batteries back in and push the power button on the remote. If this doesnt work press the two TV buttons at the same time and the remote should be fine.

Sep 14, 2007 | Vizio P2 42 in. HD-Ready Plasma Television

Not finding what you are looking for?
Westinghouse LVM-37w1 37 in. HD-Ready LCD Television Logo

614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Westinghouse Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...