Question about JBL SCS200.7 Home Cinema Package System

Open Question

I'm newbie on this, My problem is that I don't know how to install or where do I have to plug the speakers, should it be connected to the TV, or other audio system, we want this JBL SCS200.7 to have a better sound quality at home. The user guide is very poor giving information to newbies like me. Right now I don't know is I need to buy another element or I can make this thing work, I only have the TV and the JBL surround, Best regards,

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Sound problem with JBL Creature II

I had a problem with the speakers not working properly. The green lights lit, but the amount of sound coming from the speakers compared to that of the sub was much lower.
I decided to take it the speakers apart.
I found that the magnets on the speakers had moved forward slightly in the plastic cage they sat in. I pushed them back as far as they would go, and Hey Presto! working again!
I hope this helps someone!

Posted on Jul 06, 2008

Agent Jon
  • 100 Answers

SOURCE: we have recently just bought

Salutations ddog,

Really this is a question of sources. The reason your able to hear surround sound when connected to your DVD player is that is what is providing your audio and video source. When your watching television it would depend on how your getting your broadcasts. If you are either receiving an over-the-air broadcast or cable directly to your set, your television becomes the source. As your television is providing the signal, you would need it to loop back to your receiver to provide that surround sound.

Now for the good news, if you have a cable or satellite box these should have outputs to connect to your receiver to provide the audio source.

Also keep in mind not all broadcasts provide a version of surround sound. Most newer home theater systems will replicate surround sound artificially.

I hope this helps.
Jon
Go Ahead. Use Us.

Posted on Jul 28, 2008

SOURCE: No sound in 2 of my 5 JBL sat125a speakers

check your speakers on another source to cancell out if it,s truly the speakers , if not then you could be in stereo mode which would explain the three front speakers ,mains and center working! other then that unplug and reset ,and if not that then their is an internal amp issue with your system , hopefully you can get it working ,if not check your warranty and see if the manufacturer will repair or replace for you , hope i was able to help you ,please leave a nice rating if i was of help thank you Sincerely glenn mayer

Posted on Mar 05, 2009

  • 9 Answers

SOURCE: Panasonic multi connections

HDMI audio in this setup is a one way street. Audio will not come back from the TV to the audio system.
Sorry as you have not shown the model number I can not advise on the system fully.
However, it is standard on the current Panasonics to use Optical audio as a return feed or phonos.
Optical would be best as it carries full digital surround, whilst the phonos only carry "surround"
It may help for you to look a the new Panasonic web sit as there is now an interactive "How to connect your system"
PanamanNE

Posted on Jun 22, 2009

  • 18 Answers

SOURCE: No sound out of JBL LSR25P speakers attached to keyboard

problem could be in wiring, fuse, crossover or the components can be damaged. the original JBL tweeter and 5.25" speaker are no longer available so replacement options would be the only alternative.
cathy@speakerex.com

Posted on Jun 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently bought speakers for my tv and I don't


We will need the model numbers on both the speakers and the television you wish to connect them to, so we can answer your question.

Jul 21, 2013 | Televison & Video

1 Answer

My left speaker is not working and it isn't the cable connection. It has been checked and the plug is in all-the-way.


You could just have a loose wire inside the speaker but sometimes one speaker will just go to speaker heaven. Sorry I can't give a better answer and I don't know that brand so I don't know if you can open up the speaker easily to see if there is a loose connection. Now, sometimes the plugs can just wear out too which can be replaced if it is a great set of speakers but again, back to the lack of knowledge about that brand and how hard it is to work on.

May 22, 2012 | JBL Audio Players & Recorders

1 Answer

Where do the cables go for pic and sound


You can find the manual here if you need a copy.

This system was sold with speakers and connecting cables. One cable connects from the main unit to the subwoofer. The rest of the speakers supplied with the system plug into the subwoofer with their special connecting cables. If you don't have the subwoofer and satellite speakers along with the cables, you can't get sound out of this system. There is no built-in amplifier and no way to connect speakers otherwise.

The video connection to your monitor or TV is from the rear panel on the main unit. You can use an s-video cable, composite video (a single cable with RCA plugs) or component video (3 RCA cables), depending on the inputs supplied on the TV. Component video gives best performance if the TV supports it.

Jun 21, 2011 | Philips HTS3440/37 System

1 Answer

How can I get headphones to work with my Symphonic WF203 TV?


This set doesn't have a headphone jack, nor does it have RCA audio output jacks. Without one or the other, you're out of luck connecting headphones to this TV.

I remember a product some years ago that allowed adding headphones using a small microphone placed in front of the speaker. This was hooked to a little amplifier that ran the headphones so the volume could be independently controlled. It was marketed as a way to let "hearing-impaired" family members listen to TV shows without needing to make it uncomfortably loud for others. I haven't looked, but something similar might still be available. It's cumbersome, though, and needs power, plus maybe being costly if you find one.

It's possible to add a headphone jack, but you need to know how to do electronic soldering. Find a spot on the case where you can make a hole and mount a headphone jack, then wire it to the speakers. If you want the headphones to cut off the speakers when plugged in, you need a switching jack, and the speaker wires need to be cut and connected to the correct terminals. The switch built into the jack then disconnects the speakers when the headphone plug is in. If you don't need to turn off the speakers it's a little easier. You just need to wire from the jack to the speaker terminals. I've added jacks on quite a few sets. If you don't feel up to it and don't know anyone who is, you can see if a TV shop (if there are any left in your area!) would do it. (The shop I used to work for charged about $20, including the jack, but that was over 10 years ago now.)

Good luck, and thanks for using Fixya!

Jun 12, 2011 | Symphonic WF20D4 TV

2 Answers

There is no volume on the tv, the volume bar goes all the way to 99 but there is no sound, i plugged in external speakers it worked but the tv volume is not working. How do i fix this problem?


Go into your Audio menu on the TV and make sure the TV speaker are set to “ON”.
If the external speakers work when connected to the TV and the TV’s internal speakers don’t work when you remove the external speaker’s plug from the TV, then you will need to replace the main board.
The main board has all the function for the audio for the internal speakers. This was a known issue for some of the LG TV’s. So if you call LG about this issue, LG may fix it under a warranty.
Good luck.

May 21, 2010 | LG 26LG30 26 in. LCD TV

1 Answer

I HAVE A DELL OPTIPLEX 170L WITH BA735 SPEAKERS BUT i HAVE NO SOUND


Make sure you have a sound card installed
    • you think you have a sound card installed but you don’t see it under the Sound, video and game controllers category, expand the Other devices category and check any devices listed there.
  1. If there is a yellow question mark next to the name of the sound card, there might be a problem. Right-click the name of the sound card, and then click Properties.
  2. Make sure your speakers are plugged into a working power source and turned on.
  • Make sure your speakers are correctly connected to the computer.
    On your speakers, find the cable that plugs into your computer. Make sure that the speaker cable is plugged into the speakers and the correct jack on the computer. For example, if the cable is a 1/8 inch cable, there should be a round jack for it on the back of the computer. If it is a universal serial bus (USB) cable, it will plug into any USB port on your computer.
  • Make sure your headphones are not plugged into the line out (headphone) jack of your sound card or computer (unless you want to be listening with headphones rather than speakers). When you plug in headphones, most computers automatically cut the sound to the speakers.
If these steps don’t solve the problem, check the information that came with your computer and speakers or go to the manufacturer's website.

Aug 17, 2009 | Audio Players & Recorders

1 Answer

Extra speakers


hi in the back of your tv you should have 2 sets of 3 plugs called rca one set is input the other one is output if u using standard speakers connect it to the input remember the speakers need to have the rca plugs,if you use a amp connect your amp to the input to outlet and reverse from the tv.

Feb 06, 2009 | Sony FD Trinitron WEGA KV-29LS35 29" TV

2 Answers

Connect BX8A speaker to PC


Hello waddragon,

First, let's start with the BX8a. Those are powered speakers (built-in amplifier in each) so, you do not need a pre-amp. What you need to connect them to your computer is a 3.5mm to XLR cable OR a 3.5mm to 1/4" TRS cable, also known as 3.5mm to two 1/4" mono plugs (the back of the BX8a has inputs that accept either type). Cables are available at most any electronics stores. Make sure you buy a long enough cable to run from the back of the computer to where the speakers will be.
It sounds that you only have one BX8a which means you'll be listening to only one channel of the stereo output. In any case, make sure before connecting the speaker(s) to the computer that speaker power is off and volume control is at minimum. Connect the 3.5mm cable end to Line Out 1 jack of the X-Fi sound card and either the XLT or TRS ends to the speaker(s) input(s). Play some audio content on your computer, turn on speaker(s) and slowly increase volume to a safe level. Everything should work fine.
Let me know how it goes.

cancerags

Dec 28, 2007 | M-Audio Studiophile BX8a Speaker

Not finding what you are looking for?
JBL SCS200.7 Home Cinema Package System Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top JBL Audio Players & Recorders Experts

Michael Edwards
Michael Edwards

Level 1 Expert

60 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Are you a JBL Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...