Question about Lexmark Wheelwriter 3500 Typewriter

2 Answers

Punching holes Suddenly my lexmark is punching small holes in a line (not straight) when it prints. Doesn't sound like it's a setting, seems mechanical, but I cannot figure out how it happened or how to fix it!

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Lexmark Master
  • 3,594 Answers

If this is just an occasional thing check to see if there is any build up on the platen lable goop ink etc. or possibly a split platen. You can try a new print wheel.

DickyO

Posted on May 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First change your typewheel they wear sometime to points. Second you could refinish or take it our and sand it down to get ride of the hard ridges on your platton (roller behind paper). third you could adjust the lever on top left moving platton back if it has one . fourth you could adjust the front rail down ( but be careful to get it straight across). fourth you could adjust the impression with 1 of 2 pots on the board usuly under keyboard.

Posted on May 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to change font size larger when printing


Change the font on your document before printing

Jan 12, 2015 | Office Equipment & Supplies

1 Answer

Why is print quality poor after inserting new ink. Copies are faint and have lines


the cartridge is clogged with ink that has dried and reduced the slit. you need to replace the cartridge with a new one. it happens usually if you recharge the cartridge 3 or 4 times with compatible ink.

May 07, 2014 | Office Equipment & Supplies

1 Answer

How to set two sided printing in konica minolta pagepro1390MF


It might be better to place this problem in the computer section.

Oct 17, 2013 | Office Equipment & Supplies

1 Answer

Hello i have problem with old samsung...


considering the cost of new up to date printers I would consider junking it and get something under warranty that there are driver up dates for.

Sep 20, 2013 | Office Equipment & Supplies

1 Answer

Prinnter not printing but showing 'put custom in manual tray'


There is still a print job in the queue. Place a sheet so it prints or kill the job.


Open Printers and Faxes. Open printer. Highlight jobs and Right click > Cancel, or Documents > Cancel.
For those stubborn jobs, Right click My Computer > Manage. Choose Services and Applications > Services > Print Spooler. Right click and stop. Then start. This may have to be done from the Print Server if it's network printer. Contact IT to kill.

Nov 09, 2012 | Office Equipment & Supplies

1 Answer

Laser printer makes light clicking noise when idle


When idle is potentially the fuser unit, after heating and cooling. However the print quality issue associated with the clicking sound could indicate an electrical issue. The HVPS maybe faulty causing the print quality issue (due to dependant parts) and the electrical click. In any case I would recommend calling Brother and finding the nearest authorised service agent.

Oct 20, 2012 | Brother Mfc-9840cdw All-in-one Laser...

1 Answer

"Error sent to printer" problem with ZDesigner TLP 2844


have you gone to printers in control panel and made this printer with a tick in it so its the one the computer recognises

Dec 24, 2011 | Office Equipment & Supplies

Not finding what you are looking for?
Lexmark Wheelwriter 3500 Typewriter Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...