Question about Frigidaire FWT647GH
Try giving the machine a good clean with a goos cleaner and run a few time check for thins suck in side the seal and even wipe the seal as well
Posted on Jul 10, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Dark brown stains
the rear tub bearing is shot and will have to be replaced you have to replace the whole rear tub. the brown marks are coming from the spider shaft assembly its rusted out you will have to replace the whole stainless steel tub.
Posted on Jul 09, 2008
This often is called "lint" but is really a "whiting" left by un-dissolved soap and can be seen at it's worst on dark colored clothes. This is made worse in a colder climate where the cold water entering the washer is much colder than normal. Things that can effect the quality of the finished washed products.
Too much soap: ( we have a test for this further down the page ) If you follow the manufactures instructions on the box, then chances are you ARE using too much soap. They like to sell you their product, I find cutting usage in 1/2 of what the box says will still wash good and also cut your chances of getting "whiting" on your clothes.
Posted on Nov 18, 2008
I have the feeling that faded from the clothes .. so that there are brown marks .. or .. we have washing machines ber rust .. until that happens
Posted on Jun 16, 2009
Spots on clothing in a washer are usually caused by a reaction between detergent and fabric softeners, but to check and see if these spots are petroleum based (oil), try removing the spots with solvent. If the spots will come out with solvent, but not with soap and water, then it could be transmission oil that is leaking into the tub and this is very bad news. This was a common problem on the older GE and Hotpoint washers. Sorry to hear about the problem that you are having and I hope this helped. Best wishes.
Posted on Aug 02, 2009
Tips for a great answer:
Aug 08, 2012 | Furniture
Aug 02, 2009 | Washing Machines
Jun 12, 2009 | Kenmore 3.8 cu. ft. HE3t Front Load Washer
Jun 06, 2009 | Kenmore 44102 Front Load Washer
Apr 14, 2009 | Frigidaire Gallery Series GLHS269ZDB 36"...
Apr 10, 2009 | Frigidaire Gallery 30" Self-Cleaning...
Feb 09, 2009 | GE WPXH214A Front Load Washer
Aug 18, 2008 | GE Profile WPSR3120WWW
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: