Question about Honeywell 5804 Ademco Wireless Security watch

1 Answer

I disconnected the ademco from the wall to paint. not sure which slots to put the hot wire and ground in from the transformer. have a LYNXR-1 model

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

The AC power wires for a Lynx (actually, almost any alarm panel) are from a transformer--there is no "hot and ground". It doesn't matter which wire you put to which terminal, as long as you connect them to the AC connections.

Posted on Oct 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to turn off the alarm. I hit func/stay by mistake


without knowing the system type I can only guess. try entering 4 digit code then 1. if you don't know the code and have never really used system try 1234 then 1. this is assuming you have an ademco panel.

Apr 27, 2010 | Honeywell 5804 Ademco Wireless Security...

1 Answer

On a ademco vista 20p why is zone one and two not bridged


Zone 1 is separated to allow for two wire smokes that go on zone 1.

Feb 25, 2010 | Honeywell 5804 Ademco Wireless Security...

1 Answer

HI! I BOUGHT NEW CONDO WITH ADEMCO SECURITY SYSTEM MODEL 6128RF. I DON'T KNOW THE CODE TO ACTIVATE IT.IS ANY WAY TO FIND THE CODE? THANK YOU!


Yes but, what you have described is a basic keypad that can receive signals from wireless components of your system. What you need to find is 1) the transformer for the system ( usually tan about 2.5" square) and the main control box 15"tall by 12" wide (inside will be the back up battery) You will need an owners manual and a installation/programming manual for your system. The manuals are available online or post your info here. The door of the main control will have sticker saying which model you have. Now you should be able to follow the directions and be up and running in less than an hour if everything is working properly. If not, you may have a variety of batteries to replace.

Oct 28, 2009 | Honeywell 5804 Ademco Wireless Security...

1 Answer

How can we use the Honeywell alarm LYNXR series without the service if we dont know the installer code. Where would the code be found anyway?Thanks


you have get into programming by disconnecting the power then reapplying it (battery first) within30 seconds press1and 3 ( same time ) until you see 20 flashing. press #20 and the installer code will be displayed one number at a time. If you want to change it press *20and whatever 4 digit code you want the installer code to be. Next Press *99 The system will reset and come out of programming

Oct 22, 2009 | Honeywell 5804 Ademco Wireless Security...

1 Answer

I have a security system lynxr-1 i want to use it with out servive i have a 103 fault i cant get out of


Log in if you know the installer code and go to field 43 by pressing *43 and press #. Then press *41 and press #, then *99.

Sep 06, 2009 | Honeywell 5804 Ademco Wireless Security...

1 Answer

Need to know which pole is positive and which is negative for honeywell transformer for alarm system (120VAC 60 HZ .30 AMPS)


If it is a VISTA or a LYNX then it doesn't matter as the transformer puts out AC current instead of DC. This is done so you can have very long wire runs of very thin wire without causing problems.

Think of your house power, it comes from the high tension lines over many dozens of miles and they power entire city sections (AC-Power). But if you're on DC (when the poles matter) such as in a car, you'll then need a HUGE wire just to run a subwoofer amplifier by itself. Yet power tools can run on a 50' extension cord that's 1/4 the thickness and be fine! the AC power delivery is much more efficient in that respect, and alarm systems usually have wire runs that span the whole house and they're usually all around 18 to 22 guage wire (very thin) to save on installation costs...

Jun 23, 2009 | Honeywell 5804 Ademco Wireless Security...

Not finding what you are looking for?
Honeywell 5804 Ademco Wireless Security watch Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honeywell Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Honeywell Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...