Question about NetGear WGR614 Wireless Router
If you cannot remember the usrname and password, you will need to perform a "hard reset", which will restore the router to the factory defaults.
Write down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)
Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
Release the button.
Wait for the router to reboot.
Log in with the default password.
If the router was not cleared, try these additional steps AFTER the router has finished rebooting.
Unplug the router's power.
Press and hold the reset button. While the button is held down, reconnect router's power.
Continue to hold the reset button for 20 seconds after reconnecting the power.
Wait for the router to reboot.
Log in with the default password. Source(s): http://kbserver.netgear.com/kb_web_files… Please post your feedback and Vote if the problem resolved as per your satisfation.
Posted on Aug 30, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 16, 2013 | NetGear Computers & Internet
Feb 24, 2012 | NetGear WGR614 Wireless Router
Aug 27, 2011 | NetGear N300 Wireless Router
I understand that you would like to setup password on the wireless connection of the router DG834G. Please follow the below steps to enable security encryption:
1. Open a web browser (Internet Explorer, Mozilla Firefox or Safari) on a computer connected to the router.
2. Access the router's GUI by typing 'http://192.168.0.1' or 'http://www.routerlogin.com' in the address bar.
3. When prompted for Username and Password, please enter 'admin' for the Username and 'password' for Password.
4. Click on Wireless Settings (under Setup) from the left menu.
5. Select security options as WPA-PSK. Enter a Password in the passphrase box. Apply the settings.
Please use the password as set above on your wireless computers to connect to the wireless network.
I hope this information allows you to resolve this issue.
Feb 13, 2011 | NetGear DG834G Router
Dec 26, 2010 | Computers & Internet
Oct 01, 2010 | NetGear WIRELESS-G WGR614 802.11G WIRELESS...
Jul 25, 2010 | NetGear WGR614 Wireless Router
Jun 15, 2010 | NetGear WGR614 Wireless Router
Apr 07, 2010 | NetGear RangeMax NEXT WNR834B Wireless...
Feb 07, 2010 | NetGear WGR614 Router
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: