Question about Astar LTV-3201 32 in. LCD Television

1 Answer

Do you fix Astar POWER SUPPLY UNIT for a ltv-32asb I had 4 caps. replaced and it is still dead?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 211 Answers

Sorry, But we don't take boards in to finx them without the sets. Thanks for asking and I am sorry I can't help in this one. A quick suggestion is to chack all the doides on the PS Board. I find that a dead diode is the major cause is a failure.
Good Luck
Ed ( Radio Man )
NC Electronic
Mills, Wyo
307-266-4675

Posted on May 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv come but after it gets warm it turns off and doesnt come back on


Hello
Check the power supply regulator board, for any loose soldering points. If found desolder them by applying a little more solder, whout making any solder bridge short in between adjecent solder terminals. If this does not help you, replace the power supply board as card basis. OK.

Jan 02, 2012 | Astar LTV-32ASB 32 in. LCD Television

1 Answer

My Astar LTV-32ASB 32 in. LCD Television changes channels on its own. Everything else works fine. Is this a capacitor issue? Is this difficult to fix?


Hello
Check its front panel switches. If any one among them get strucked, this type of fault can occur. The switches are directly soldered to a printed circuit board. Replace all of the at the same time. They are not too costly. They are microswitches. Can be bought from most of the electronic spare part selling shops at your town. OK.

Jul 09, 2011 | Astar LTV-32ASB 32 in. LCD Television

1 Answer

Need power supply for astar ltv-32asb tv


Click here to find the power supply for you LCD. I would suggest to check the power supply part number from your LCD before ordering.

Nov 03, 2010 | Astar LTV-3201 32 in. LCD Television

1 Answer

Screen not working


The backlight or power supply for it has failed. Use a strong light next to the screen and look for a faint picture. If it is out of warranty, take it to a repair shop.

Apr 07, 2010 | Astar LTV-32ASB 32 in. LCD Television

2 Answers

My ASTAR LTV-32ASB will not power on.


Your going to have to check the voltage coming from the PS and see if the inverter is killing it or if the PS is defective.

Feb 26, 2009 | Astar LTV-32ASB 32 in. LCD Television

1 Answer

LTV-32ASB ASTAR -BLUE POWER LIGHT TURNED TV OF AND ON TWICE- AND


Hello Sir,
I need more details for these problem,
Please call 323-767-6030 and I will go through with you for the astar tv, model LTV-32ASB.

Jan 21, 2009 | Astar LTV-3201 32 in. LCD Television

2 Answers

Need Help With My 32" AStar TV


Hello,
I can help you test your power suppy for the Astar LTV-32ASB and try to repair it. But if you know the defective power for sure then I know where to get this original Astar power board. I worked in Astar Company as an electronics technician before till they are clossing down and I know all model of the Astar TV.
Please call me 323-767-6030 I will go through the trouble shotting, with you.

Jan 05, 2009 | Astar LTV-32ASB 32 in. LCD Television

1 Answer

Astar LTV-32ASB will not power on.


The power board is defectived, just e-mail me the power supply picture and I will help you go throuth the problem. tietivan@yahoo.com or call 323-767-6030

Oct 07, 2008 | Astar LTV-32ASB 32 in. LCD Television

1 Answer

Astar Plasma


I had the same problem... Astar 30" LTV 3001 ....These TV's have a cooling problem that causes premature electrolytic capacitor failure. De-solder and Test all the 2200uF-25v, 3300uF-35v and 1000uF-10v caps in the power supply (center board, back of TV). Use a good LCR meter that will read 3300uF or better, Replace all bad caps with 105c rated caps. If you don't have an LCR meter, replace all the mentioned caps on the PS. If fuse on board is blown, also replace the F9222L regulator IC chip. Mounting a small cooling fan on rear of TV over the PS will help keep your new caps from failing again. This requires holes in the stand bracket and the rear of the TV, power can be supplied from a 14V source near the bottom of the PS board.

Jan 13, 2008 | Astar LTV-3001 TV

7 Answers

Astar LTV-3001 30 inch


It's easily to fix the problem. Just replace the buffed capacitors on your power supply board.

Dec 03, 2007 | Astar LTV-3201 32 in. LCD Television

Not finding what you are looking for?
Astar LTV-3201 32 in. LCD Television Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Astar Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Theo Nikolaidis
Theo Nikolaidis

Level 2 Expert

89 Answers

Are you an Astar Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...