Question about Chamberlain 1/2-HP Whisper Drive Belt Drive Garage Access System

1 Answer

I need to change the key pad to my chamberlain whisper drive garage door opener. Recently got divorced and ex has the origional key pad entry number. I can not find anywhere that knows how to change it. HELP!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 143 Answers

Press the colored learn button on the motor head until the led light by it goes out. This erases all old codes out. Make sure you have all the remotes handy too. -----Press and release the learn button and then press the button on the remote. For multiple remotes repeat from -----. For a keypad press and release the learn button and then within 30 seconds enter in the 4 digit code(different than the old one) and enter. This should do it. Thanks BB

Posted on Sep 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the code on my keypad outside the garage door on my chamberlain whisper drive? someone stole the sticker from the pad... thanks


Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to the keypad and key in any 4 digit code you like and press enter.

Nov 09, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Forgot pin for key less entry pad


You just have to reset everything on the opener itself. Re-program all you hand held remotes as well as create a new pin for your keypad. This should take of it.

Sep 19, 2010 | Chamberlain 1/2-HP Whisper Drive Belt...

2 Answers

(Chamberlain 1/2 hp Whisper Drive garage door opener) the garage mounted opener will open the door, but none of the remotes now work. batteries have been changed already. Is there a way to reprogram the...


If the wall button will operate the door up but none of the devices do then look at the wall button. Find the lock button and push it for 2 seconds and then try the remotes again. This is your vacation lock. You can get a manual at chamberlain.com. Now if the door does not open or close with the remotes you can reprogram them. Press the colored learn button on the motor head and then press the button on the remote. Repeat for each remote. If they fail to program you will need a new logic board. Thanks BB

Aug 18, 2010 | Chamberlain 1/2-HP Whisper Drive Belt...

1 Answer

We have installed a chamberlain wireless keyless entry. The problem is that when our neighbors house uses their keyless entry our garage door opens without us using our code. We have checked this seveal...


We have a Chamberlain Whisper Drive Plus. The keyless entry stopped working, suddenly. I have changed the battery, not the problem. I cannot get it to work, and cannot get it to reprogram. The keypad lights up when buttons are pressed, but when I press "Enter" the whole keypad flashes for about 30 seconds and then just goes dark.

May 10, 2010 | Universal Garage Wireless Keyless Entry...

1 Answer

Chamberlain Whisper Quiet garage remote won't work


There isn't a trick but you must make sure you got the right remotes for your opener. The receiver which is part of the logic board can quit working and it sounds like this may be the case in your situation.

Sep 14, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Changed code on the wireless chamberlain security key pad


Does it work from wall button? Hit learn button for 10 seconds. Hit again for 1 second and code keypad.Opener lights should blink 2x. Hit learn again for a second and hit button on a remote (Any button you chose). Again, lights should blink. Now should work. Repeat for any other remotes.

Jul 24, 2009 | Chamberlain 950CB Remote Control

1 Answer

Need to change my remote code after divorce


Follow this link for the manual and look on page for programming.
http://www.google.com/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=oMg&q=liftmaster+garage+door+openers+manual&btnG=Search

Dec 16, 2008 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Keyless entry pad for garage door opener


THE FREQUENCY OF THE UNITS ARE PROBABLY NOT COMPATABLE THEY CHANGED ABOUT 2 YEARS AGO.

SORRY - I THINK YOU NEED A NEW KEYPAD TO GO WITH THE NEW OPENER.

Oct 22, 2008 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Belt Noise for Chamberlain HD600 1/2 HP Whisper Drive Garage Door Opener


You could always use "Belt Ease" from an Auto Parts store. It's made for squeeky belts.
-Lonnie

Jul 29, 2008 | Electrical Supplies

Not finding what you are looking for?
Chamberlain 1/2-HP Whisper Drive Belt Drive Garage Access System Logo

767 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chamberlain Building Materials Experts

Terry Smith

Level 1 Expert

59 Answers

Joseph Hoffmann

Level 3 Expert

1746 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Chamberlain Building Material Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...