Question about Maytag PAV2300 Top Load Washer

1 Answer

Maytag performa PAV2300AWW does not spin (wash cycle works fine). During the spin cycle the tub does not rotate...but i can hear the motor running...water drains...Pls help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 43,501 Answers

Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Posted on Aug 29, 2010

  • 1 more comment 
  • c_vamsi Aug 29, 2010

    Thanks Heatman for the information...
    One question -- During the wash cycle I see that the agitator is rotating in both directions, but the wash tub doesnt rotate at all...is that how it is supposed to be...?

  • D. Floyd Kolb
    D. Floyd Kolb Aug 29, 2010

    Yes, that is normal operation...

  • c_vamsi Aug 30, 2010

    Thanks again....Any idea if "Maytag performa PAV2300AWW" is a drive type or belt type or clutch type or coupler type...?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag Performa pav2300aww stops and starts


If it's stopping during a wash cycle, suspect the heater elemant not heating up and moving the controller on. See if it runs fine during a spin/drain cycle. If it is very slow on all programs, try the noise filter capacitor before condemning the controller.

May 18, 2012 | Washing Machines

1 Answer

MAYTAG PERFORMA MODEL# PAV2300AWW, REVISION#12, SERIAL#12296390ZM Washer filled but made loud grinding sound while agitating. I couldn't drain water on spin cycle. Now it has stopped working, I smelled...


hello you need to change drum rollers but if u remarked water dawn the washer and burn smell it could be the motor OR THE BELT because when the drum stop turning or turn slowly the motor turn fast on the belt when spin time it make this smell .

Sep 11, 2010 | Maytag Performa PAV3200

1 Answer

Maytag Performa, Noisey spin cycle, now does not work


the belt may be old and stretched/slipping...if it is stretched and slipping it will cause the squealing .............otherwise, check the pulley for the belt/motor to see if it is okay and the motor itself copuld be worn out if the belt looks ok............be careful, you can get zapped if you touch a wire and also if the motor is burned up it can cause a fire so watch carefully and you should be able to see which of these possibilities are the problem..............

Feb 13, 2010 | Maytag PAV2300 Top Load Washer

2 Answers

Maytag PAV2300AWW Washer makes grinding sound when agitating


Sounds like it is the bearing on the water pump. Take off back plate and replace and remove 3 screws and two hoses (the one hose is a waste line so make sure you have a bucket to empty our waste water) after removing these remove belt on bottom of pump.

Sep 29, 2009 | Maytag Performa PAV3200

1 Answer

Grinding sound during agitation cycle on my Maytag Performa


Its probably you stator plate and rotor. But you need special tools for this repair. There a spring that is under 200 pounds of pressure and if you take the screws off that hold the plate its going to fly into you face if your dont use the special tools to depress the spring. Is it more of a clanking kinda of noise? DOes it olnly happen with heavy loads? Try this out. Fill the washer with water only. and get it into a wash cycle with water only. If there is no noise then put in like a load of towels. A heavy load. Now if you hear the noise now then its for sure you stator plate and rotor..hope this helps, but like i said you need those special tools to do this repair or injury can result from the spring part.

Jul 27, 2009 | Maytag Performa PAV3200

1 Answer

Maytag performa PAV2300AWW will not spin but sounds like it is.


I think you have guessed it right. There is probably something stuck between the tubs. I have seen this caused by a lot of things. You should look for things as small as coins, shirt buttons, cufflinks etc., Also I advice you not to turn on the machine until the blockage is removed.

Good Luck,
Sai.

Mar 15, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Maytag Performa PAV2300AWW Wahing Machine


Banging side to side during spin cycle.

Dec 31, 2007 | Maytag Performa PAV3200

Not finding what you are looking for?
Maytag PAV2300 Top Load Washer Logo

732 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...