Question about Alpine TDM-7561 Cassette Player

Open Question

Alpine car stereo - security code

We have a '94 Toyota with factory fitted Alpine stereo 7510T
We do not have the player manual - after we changed the battery we need to enter the code. Toyota dealer advised code would be last 3 digits of chassis number.
How is this entered? There are numbers on the stereo (1 to 6) - our chassis number includes a nine.
What is the process to restore our stereo to working state?
cheers, Leon

Posted by on

  • 1 more comment 
  • Anonymous Dec 27, 2008

    CODE NOMPER ERROR

  • beckregina Jan 20, 2009

    I have a 1996 jaquar, the battery was dead, when I purchase the car, but can not locate the security code to the stereo system

  • Anonymous May 10, 2009

    Sam problem as Leov8

×

3 Suggested Answers

blueextc3221
  • 15935 Answers

SOURCE: removing my alpine 7510T

The trim ring around the radio must be removed, then slide alpine head unit removal heys in each side.

Posted on Dec 26, 2008

  • 1 Answer

SOURCE: Security code for Car Radio cassett Alpine 7510T

I have a manual for this type of stereo and it states:
Turn ignition switch to accessory position and enter code: 2 3 3 5 6
I have tried but not had any luck!!

Posted on May 09, 2009

  • 4706 Answers

SOURCE: need to reset alpine 7510T

If this is the model fitted in a TOYOTA then the code is only available from the Main Dealer or a Decode Specialist (or your local Car Radio / Audio Store) who will connect a laptop to read/recode the memory chip

Posted on Sep 21, 2009

Testimonial: "thanks we had no idea what or where to go so that is great "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Alpine 7510T recevier/cassette player in my Toyota Town Ace. The battery was replaced & the unit has locked. I have the security code but can't enter it correctly to unlick the unit. What...


put the ignition on to just before starting the engine then add each number while u wait for the flash in between each number ie 1 flash 2 flash 3 flash 3 flash 4 flash 5 flash.

Sep 06, 2010 | Alpine TDM-7561 Cassette Player

1 Answer

94 Honda Prelude Factory Car Stereo/CD Player


The BUS wires are a serial data link, probably incompatible with other makes of CD player. I'd hesitate to connect it to +12v, this may cause damage. If anything try connecting it to BUS.C through a 1kohm resistor to start with.

Perhaps you need something like this to make it work. http://www.caraudiocentre.co.uk/product_m-alpine-kcm-122b_p-20941.htm

 

 

Oct 21, 2007 | Car Audio Receivers

1 Answer

Want to install alpine system in 1997 toyota corolla. i need a wiring diagram for the cross over change


if you want to put a new car stereo in ur car you can buy a plug from wal-mart that is color coded to do the change for you

May 10, 2010 | Alpine CDM-7874 CD Player

1 Answer

Hi i have brought a second hand car, which was fitted with an Alpine cda9830r stereo, but no user manual, i have found one for a cda9830 stereo, is there a lot of difference in the two, as i have amps,...


Hi stephen my names Josh. Its great you could find a second hand manual for the cda9830 and theres not any difference your manual will tell you need to know about the cda9830r as well. Your amp hook up will be very standard speakers and sub will match very well with the that alpine in your car.

Mar 05, 2010 | Alpine CDA-9830 CD Player

1 Answer

Need to reset alpine 7510T


If this is the model fitted in a TOYOTA then the code is only available from the Main Dealer or a Decode Specialist (or your local Car Radio / Audio Store) who will connect a laptop to read/recode the memory chip

Sep 21, 2009 | Alpine TDM-7561 Cassette Player

2 Answers

I am trying to install a Alpine CDE-7822S stereo into my 1996 Toyota T100. What do I need?


ok here is what you need to install>>>>you will need an install kit which is for the after market stereo to fit in the space your factory one was in also you will need the WIRE HARNESS for that year and model of vehicle...sometimes when you buy the insatll kit it will come with one....once you get that all you have to do is remove the stock radio and then wire the wires from harness to your wires on aftermarket radio and just plug the harness into the black picece behind dash

Jun 04, 2009 | Kenwood KDC-MP228 CD Player

1 Answer

Removing my alpine 7510T


The trim ring around the radio must be removed, then slide alpine head unit removal heys in each side.

Dec 26, 2008 | Alpine TDM-7561 Cassette Player

1 Answer

Security code for Car Radio cassett Alpine 7510T


I have a manual for this type of stereo and it states:
Turn ignition switch to accessory position and enter code: 2 3 3 5 6
I have tried but not had any luck!!

Nov 01, 2008 | Alpine TDM-7561 Cassette Player

2 Answers

Instaling alpine car/cd stereo cda 9807


Its probably your wiring harness that came with the stereo. Which can cause many more problems. alpine changed their wiring harness around that time. But they used the same plug, just wired different. So now there are crossed wires, but the plug fits, causing the amp chip to fry. maybe even further than the amp chip. an amp chip replacement runs about 80$ at a repair shop. if its just that.

Nov 18, 2007 | Alpine CDA-9807 CD Player

Not finding what you are looking for?
Alpine TDM-7561 Cassette Player Logo

Related Topics:

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Alpine Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...