Question about Bakers Pride Y-600 Gas Single Oven

1 Answer

Too hot just replaced thermastate on my y600 bakers pride deck oven. i have a good flam but i can nor get then tempature down past 500 even with the controll turned all the way down it still wont get less than 500 degrees i am not sure if it needs to be calbrated or not. i have replaced them before on other ovens and this never happend please help if you can

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 125 Answers

Hi, not sure if you ever received a reply, but there is a setting known as "bypass" on commercial thermostats, if you took the cover off to replace it, you can access this screw, it is part of the body of the thermostat, either to the left or the right of the knob shaft, usually has a "B" stamped, or molded into the body. What this setting does is when the thermostat reaches temperature, it would normally close, shutting off the supply to the burner, thus the temp would begin to fall, by the time it opened back up, the temp would have fallen too much, causing a large temp swing. The bypass setting opens or shuts a passage that "bypasses" the thermostat main valve, keeping just a little burner, making the swing, or fluctuation smaller. So, you probably have a setting too big, causing your bypass flame to be too big, raising, or keeping the temp too high, try turning it in (cw) to lower it slightly, a small turn makes a huge difference, so go easy. Hope that helps, and thank you.

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to get 2 slates for y600 pizza ovens do you sale them.


When your looking for this part it is called the "Stone Deck"

36" X 60" for most Y600 Models. FixYa is a "help you" site not a full blown retail outlet.

This is the Y-600-(old style) manual:
http://www.bakerspride.com/pdfs/Y-600%20Parts%20List%20OLD%20STYLE%207-05.pdf

This is the Y-600 manual: http://www.bakerspride.com/pdfs/PartList/Y-600%20Parts%20List%20U6050A%208-08.pdf

This is the Y-600-DSP manual:
http://www.bakerspride.com/pdfs/Y-600%20DSP%20%20Parts%20List%20U6051A%202-07.pdf

Their website went down for maintenance as I was doing this. But their phone number is on the website. http://www.bakerspride.com/

Thier manuals list is here. Note the price list for parts is at the very bottom block top of 3rd row.
http://www.bakerspride.com/manuals.asp

Thanks for choosing FixYa.

Kelly

Sep 14, 2010 | Bakers Pride Y-600 Gas Single Oven

1 Answer

Bakers pride electric deck ovens aprox 10 yrs old


It depends on the ampere rating, you will not normally be able to get a single phase supply in the UK at more than 100 amps total.

If the total oven rating is not more than 60 amps you may be ok.

Conversion would involve altering the wiring in the oven which may be costly and not worthwhile on a 10 year old oven.

Jan 06, 2010 | Bakers Pride CO11-G2 Gas Double Oven

1 Answer

One of our ovens has part of the bottom pealing off inside the oven. Is there a fix for this?


Unplug the unit, remove the conveyor belt and replace the bottom of the oven with a Stainless Plate from Bakers Pride or from a local machine shop

Nov 30, 2009 | Bakers Pride APC-18-1 Electric Single Oven

2 Answers

Baker's Pride P-44s P44s


You can get parts here at this link.

http://www.tmeinc.biz/xbpride.htm


Good luck and please rate

Sep 24, 2009 | Bakers Pride P-44S Oven

1 Answer

Pilot light still going out


If this oven has a "stack" (where the hot gases & heat vent to your hood) air could be blowing down the stack affecting the pilot. Simple test, Bic lighter lit at the top of the stack in the middle of the opening. If the flame is being sucked down the stack, then you have air blowing the pilot out. How old is the thermocouple on this unit ? Pilot flame heats this up to send a signal to your main gas valve to open up so the burners light. A weak t-couple could be your problem. Hope this helps

Jul 23, 2009 | Bakers Pride FC-616 Gas Single Oven

1 Answer

Bottom oven pilot light goes out intermitantly.


adjust the flame so that it stays on the thremal couple and keeps it hot if it is off by 1/4 inch it will not work.

Jul 22, 2009 | Bakers Pride FC-616 Gas Single Oven

1 Answer

Automatic oven starter-timer


Hi there. If you have an older oven, it most likely does not have a combination valve with a thermopile, not the same as a thermocouple, or a hydraulic safety. If there is a red button sticking out the panel where your thermostat is, you have a hydraulic safety. What you want can be done with wiring, solenoids,timers, and the correct location in the gas line, but would require a bit of modification. I would only use a servicer for this type of modification, if they will even do it, could you find someone to do it, with little concern about safety? sure, but it must be understood, you are taking the risk, and responsibility. This is definitely not a do it yourselfer task.

Jan 23, 2009 | Bakers Pride Y-600 Gas Single Oven

1 Answer

Thermostat setting for bakers pride y600 oven.


Hi, those screws are for the calibration of the knob to the thermostat, so your calibration is correct. Most likely you will have to contact a servicer to check the calibration, and set you knob and plate where they will align with the actual temp again.
Hope that helps, and thank you.

May 19, 2008 | Bakers Pride Y-600 Gas Single Oven

2 Answers

Door on my bakers pride y600 pizza oven


Theses are called 3/4 door busings and should be changed when you replace the left side door rod (complete)and are available from any parts depot that sells bakers pride parts

Jan 20, 2008 | Bakers Pride BAK-DS805 Gas Single Oven

Not finding what you are looking for?
Bakers Pride Y-600 Gas Single Oven Logo

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bakers Pride Ovens Experts

paulcarew

Level 3 Expert

1904 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Bakers Pride Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...