Question about Office Equipment & Supplies

2 Answers

Repair manual Neopost Folder inserter Series One 7755 Folding not parallel to page

Posted by on

  • john_hendry Aug 29, 2010

    Hi - the service manual is impossible to download without subscribing to Facebook and allowing access to that account and my personal information.
    Anyway round it or can you tell me the fix for paper inserting into machine at a slant angle?
    Regards,
    John

  • john_hendry Aug 29, 2010

    Insert feeder is pulling document for folding through at a slant causing foldng to be uneven and not parallel to the page.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

There are gears which spins and that makes the paper to enter the unit.But when you place the paper at there feeder side ,if the spin gears are cracked or threading on the gears is rubbed or any of the threading got cracked on the slanting side then the timing to pull the paper will be slow.there are rollers.on the side of the rollers there are gears.Now on one side the paper go slanted and other side the paper goes proper.So on the slanted side the gears needs to be checked.In some cases the gears and rollers all are actually proper.But there is a problem of any of the gear out of its setting alignment .So first thing to do is to check the rollers beneath the feeder where you place the paper. There you will see both the roller and the gears.check out that and continue troubleshooting from there. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Aug 29, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Here is the website to download your service repair manual


http://www.scribd.com/doc/36359094/Duplo-MD430-Service-Manual

Posted on Aug 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Neopost si 68 stops after loading paper.


Go To Below official Canon Printer Page For Your problem
http://software.canon-europe.com/files/soft35401/Manual/Canon%20MP270%20_MP250%20series%20EN.pdf Hope It's resolve all Your Printer Problem,
Or

Still having Problem Then follow Us For Canon Printer Support

Mar 12, 2014 | Office Equipment & Supplies

1 Answer

Printing autocad


Hi kevin,
Go To Below official Xerox Printer Page For Your problem,
Xerox 510 Series Print System with AccXES Controller serial number HFT... Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For Xerox Printer Support

Mar 07, 2014 | Xerox Office Equipment & Supplies

1 Answer

What are the different types of folds that a paper folding machine can do?


There a few different types of folds that a paper folder can do. All the different kinds of folds can be found on this site. Before you get excited about all the different folding options that are available you want to make sure that your folding machine is capable of doing those folds.

Sep 24, 2013 | Office Equipment & Supplies

1 Answer

Repair / replace trimmer on braun 9585 shaver


This part is only available from a Braun repair center. You can call a repair center at 847-869-7755

Sep 03, 2010 | Braun Series 7 9585 Hair Trimmer

1 Answer

How do i install 2 ckicker cvr to my amp


Here are a couple of diagrams 2+4 ohm dual voice coil wiring.

Option 1 (parallel/parallel) = 1 ohm load
Voice coils wired in parallel, speakers wired in parallel
Recommended Amplifier: Stable at 1 ohm mono 2_4ohm_dvc_1ohm.gif
Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_4ohm_dvc_4ohm.gif

Option 1 (parallel/parallel) = 0.5 ohm load
Voice coils wired in parallel, speakers wired in parallel
Recommended Amplifier: Stable at 1/2 ohm mono 2_2ohm_dvc_05ohm.gif
Option 2 (series/parallel) = 2 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono 2_2ohm_dvc_2ohm.gif
Option 3 (series) = 8 ohm load
All voice coils wired in series
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_2ohm_dvc_8ohm.gif

Apr 12, 2010 | Kicker CVR12 Car Subwoofer

1 Answer

How do i hook up kicker solo baric in the box


Option 1 (parallel/parallel) = 0.5 ohm load
Voice coils wired in parallel, speakers wired in parallel
Recommended Amplifier: Stable at 1/2 ohm mono 2_2ohm_dvc_05ohm.gif
Option 2 (series/parallel) = 2 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono 2_2ohm_dvc_2ohm.gif
Option 3 (series) = 8 ohm load
All voice coils wired in series
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_2ohm_dvc_8ohm.gif Option 1 (parallel/parallel) = 1 ohm load
Voice coils wired in parallel, speakers wired in parallel
Recommended Amplifier: Stable at 1 ohm mono 2_4ohm_dvc_1ohm.gif
Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_4ohm_dvc_4ohm.gif

Apr 10, 2010 | Kicker Solo-Baric L5 Car Subwoofer

1 Answer

How do i install my L5 solo barics to a 2 channel amp if there is only one connection on the enclosure next to the vent? If I bridge the amp to 1x1000W will the power distribute evenly between both...


Option 1 (parallel) = 2 ohm load
Speakers wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono 2_4ohm_svc_2ohm.gif
Option 2 (series) = 8 ohm load
Speakers wired in series
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_4ohm_svc_8ohm.gif
Option 1 (parallel/parallel) = 1 ohm load
Voice coils wired in parallel, speakers wired in parallel
Recommended Amplifier: Stable at 1 ohm mono 2_4ohm_dvc_1ohm.gif
Option 2 (series/parallel) = 4 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_4ohm_dvc_4ohm.gif Option 1 (parallel/parallel) = 0.5 ohm load
Voice coils wired in parallel, speakers wired in parallel
Recommended Amplifier: Stable at 1/2 ohm mono 2_2ohm_dvc_05ohm.gif
Option 2 (series/parallel) = 2 ohm load
Voice coils wired in series, speakers wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono 2_2ohm_dvc_2ohm.gif
Option 3 (series) = 8 ohm load
All voice coils wired in series
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_2ohm_dvc_8ohm.gif
Option 1 (parallel) = 2 ohm load
Speakers wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono 2_4ohm_svc_2ohm.gif
Option 2 (series) = 8 ohm load
Speakers wired in series
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_4ohm_svc_8ohm.gif
Option 1 (parallel) = 2 ohm load
Speakers wired in parallel
Recommended Amplifier: Stable at 2 or 1 ohm mono 2_4ohm_svc_2ohm.gif
Option 2 (series) = 8 ohm load
Speakers wired in series
Recommended Amplifier: Stable at 4, 2, or 1 ohm mono 2_4ohm_svc_8ohm.gif

Apr 09, 2010 | Kicker Solo-Baric L5 Car Subwoofer

1 Answer

How do i wire two 15 inch subs to 2 ohms


Hello familia_gome,

Those MOFO-15's have dual 1ω voice coils. So the only way you can get 2 of them to present a 2ω load is to use 1 voice coil on each one with the two of them wired in series. Using both voice coils, you can get a 1/4ω load by wiring the voice coils in parallel and then wiring the subs themselves in parallel. You'll get a 1ω load with the voice coils in series and then parallel the subs. Or you'll get a 4ω load with both the voice coils and the subs in series.

Here's a link to Power Acoustik's PDF for the MOFO's. I recommend that you check out the wiring diagrams on page 3.

http://www.poweracoustik.com/SUPPORT/MANUALS/PA-MOFOWoofer.pdf

Hope this helps.

Apr 05, 2009 | Power Acoustik MOFO-15 Car Subwoofer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...