Me too. it usually just says "please wait" for about 20 seconds and then "check camera connection" then goes back to the home screen. But a few minutes ago it went all pixilated white and pink after saying "please wait"
None of the buttons worked and my phone just went back to the home screen when i shut it :( good luck with yours! xxx
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try to do a hard reset and then try again to open your camera. If still doesn't work, and you are experiencing software error, I suggest to bring your pda to a service center to further check your pda.
Hm, this is a difficult one. I have a F700 and there is no option for it to auto lock on slide closure. U might have a different firmware so look around the settings for it. Disable it if you can find it.
This might also sound stupid but make sure the lock key on the right hand side has been slid up. Slid down locks touchscreen.
My f700 does NOT launch the camera upon pressing the camera button at home screen. It does nothing if i do that. I need to goto into the menu and then the camera for the camera button to work and to take pictures. I think this was a smart move for Samsung to design it like this. I could see myself accidently pressing that many times.
do a reset on the phone take out the batery and put it back in, if you have already doen that and it doesnt work still i would reset the settings byy goign into security options in your settigns tab and to reset settings to factory settings. but put all your pics, rigntones and contacts saved on your computer first. do you have a memory card? if you get one this could fix the issue as well
I have been working on Camera cell phones and see these kinds of issues. I am afraid that your camera interface was bad and the phone main board is not recognize the connected camera. I don;t think this is a software isue when it error message said connect the camera or reset pc.. If you are not think my suggestion is correct, you may try the other way by flashing the ROM as updating the new ROM version, it may also hlep to solve this issue and if it is still not, then I am sure th efaulty is from your camera. This is an comment issue in most camera phones I have been fixed before. I hope it help.
Quite simple, and t-mobile was no help: This solution worked for me, YMMV. Hit the menu key > System settings. Within system settings, press menu, shift, and d key. This will open up the diagnostics program. Run all of the checked options. When that completes, return to the diagnostics program again, and select only "Battery disconnect." I left the phone in this state overnight, and the camera worked the next morning. Hopefully this is helpful.