Question about Televison & Video

1 Answer

Hi just got manhattan plaza hd700 but got no manual with it plug all the leads in all i can get is fuzzy lines on the tv tryed pressing the buttons on remote but getting no reponse can you help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Hi.

The setup consists in connecting the freeview box to TV, then locating the box source/input channel on TV using the source select button on TV, and finally tuning the box to receive channels.

After connecting to TV and finding the source you already will see the box display before tuning cahnnels. To tune channels you have to go to setup menu, ensure that antenna cable is properly connected.

To get the manual register your account on manufacturer website, validation may take few hours before the account becomes active: Browse our selection of support downloads

If you want you can also submit a ticket to get in touch with company tech support:Contact us & receive support via our ticketing system

Try also registering the product:Register your product for one year full warranty

Posted on Aug 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn on manhattan freesat without remote


There are certain options not available without the remote, but you can download the Manuals/Guides here... http://www.manhattan-receivers.com/products/plaza-hd-s2-freesat-hd

Jul 14, 2014 | Televison & Video

1 Answer

Why are my channels fuzzy?


Hi Virginia,
I have the manual link for you for your TV, basically your issue falls into INPUT issue. Kindly check if the INPUT of your TV is correct. Steps below:

- INPUT SELECT button- Press to select
TV or the external input (VIDEO1,
VIDEO2) mode.
(See USING AUDIO/VIDEO INPUT JACKS.

- AUDIO (INPUT) L/R jacks- Connect to
the left/right channel audio output jacks of
a video camera or VCR.
Note: The AUDIO (INPUT)L jack is for
mono input. The sound is heard from both
speakers. Use this jack for monaural audio
equipment to be hooked up.

These steps is in page 2 of the manual. Hope it helps.



Emerson EWF2004 Owner Manual Page 2 Table Of Contents

May 05, 2014 | Emerson EWF2004 20" TV

1 Answer

Hello, i just bought an lcd Tv converter made by manhattan. the model is 176156. the problem is in the video section, don't let me change the standards (NTSC, PAL, PAL-NC, etc) want to know if there


I think you press the wrong button that change the settings of your TV to restore it original settings kindly go to menu and find factory settings then press enter..

hope it helps..

Dec 11, 2011 | Manhattan LCD TV Converter/Tuner (176156)...

2 Answers

Hi, I have a Manhattan Line Interactive UPS Model #168120 that needs a new battery. Is it replaceable in this unit? Thanks.


The battery is listed as replaceable. However, Manhattan indicates that the battery is not user-servicable. Since the company no longer seems to sell any UPS, getting it serviced may not be possible.

A copy of the manual is available here: http://www.comtekcomputers.com/manual/html/168120_manual.html . The relevant section is part of the trouble-shooting guide: "The battery is old or bad. Return for service."

I wish that I had better news for you.

Cindy Wells

Aug 22, 2011 | Computers & Internet

1 Answer

I have just brought ps3 and when i plug the leads into the tv ie red white and yellow leads i can not find the channel on my tv i have tried other tvs and same thing so i done away with the lead and just...


Hi, try not using the hdmi lead and plug the other lead back into the ps3 the normal av lead with the 3 color wires, now plug it into your telly now switch the ps3 on at the back so the red light is on at the front, now hold down the one button and it will bleep once then bleep twice and keep holding it down till it switches back off

so basically you switch it on at the back then press and hold down the on button until the ps3 turns itself back off, now what this does is reset the video mode so its not set to hdmi settings, now press the on button again and wait for it to come on if you still dont have picture on the telly make sure the video lead is fitted correctly and then get the telly remote and find one of the following buttons
av
source
input
or a rectangle with an arrow facing to the right.

once you have found this button make sure the ps3 is on and then press this button on the tv remote, you may need to press it more than once depending on how many inputs the telly has on it.

now when you press the button on the tv remote press it once then wait 5 sec before pressing it again just to give it chance to pick the signal up.

hopefully now you have the ps3 working through the normal av lead

let me know how you get on or if you need further assistance ok

please rate this solution as i have a whole page of unrated posts, thanks

Nov 28, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

On which channel on tv set can i see the wii image the remote control switches the console on & off but we can't do anythying further despite of our connecting it correctly


hi, once you have plugged the wii into a socket on the back of the telly you then switch the wii on and then get your telly remote then depending on how you have it plugged in would depend on what button to press, if its the rectangle scart lead fitting type then you need to press one of these buttons.
av
source
input
or a picture of a rectangle with an arrow facing to the right

so find these buttons on your remote and press it now depending on how many inputs the telly has would depend on how many times you press the button you may need to press it up to 5 times so bare this in mind, if it is scart lead then if you look on the back of the telly where you plug the lead in it should tell you if its av1 or av2 or av3 if it tells you this then thats how many times you need to press the button.

if your using the 3 color leads then these will be under one of these buttons.
source
input
or the rectangle with the arrow
or video button
or button that says ext
once you have found these buttons give it a press until you see the picture.

then to get back to your tv you keep pressing the button till you get the tv picture or press a button that says tv.

let me know if you have any problems ok

Jul 10, 2010 | Nintendo Wii Console

1 Answer

How can i hook up my play station to my element tv i have tryed all the out puts and inputs on the tv


hi, are you using the scart lead fitting from the play station into the telly if you are then make sure the scart lead is pushed in all the way on the back of the telly as if its slightly out you wont get any signal.
If your using the scart lead then make sure the playstation is switched on and all the leads are in properly then you need to get your telly remote and press either the AV or source button if your remote dont have source button or av button then you need to look for a button that has a picture of a square with an arrow running through it.
Now make sure the playstation is on then start pressing the button on the remote you may need to press it two or three times till its on the right av channel.

If how ever you are using the three colored leads and plugging them into the back of your telly then you may find that this might not work but its the same as the scart lead so try pressing the same button on the remote and see what happens. if you have no luck with the three colored wires then you may need to buy a converter that converts the three colors into a scart lead you can buy these of an auction site or from any electrical or gaming shop, they cost next to nothing to buy.

Let me know how you get on or if you need further assistance ok

Nov 06, 2009 | Element ELC-HS321 32 in. LCD TV

4 Answers

How to fix fuzzy pic & red,blue,green lines on your screen?


Typically this is due to a convergence chip failure. This repair can be done pretty easy with the proper instruction. Have a look at this video to help determine if you truly have a convergence problem.

Jan 26, 2009 | Toshiba 57H82 57" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...