Question about Acer AL1916W 19" LCD Monitor

1 Answer

I have to turn monitor on and off 10-12 times before it kicks in

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Look for bad DC filter caps as shown in my albums here:
If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.
http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Posted on Aug 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Letter are spaced too close. How do I change.


There should be a lever marked : "10,12,Pica" depending on the model machine ut should asjust the characters per inch.

Mar 01, 2015 | Office Equipment & Supplies

1 Answer

How to reduse vibration disel bullet


Engine was not properly tuned, there might be missetting, or most of parts exploited. you have to rebuild it , I only do it fully ,
my garage is at - lamba
ta- kalyanpur, dist- devbhumi dwarka
mo.9998075794 Hemat bharadva
days to service-10,12

Mar 04, 2014 | Enfield Taurus diesel Motorcycles

1 Answer

Is it safe to use a fetal hear monitor at home?


It is 100% safe to use a prenatal heart monitor at home. They tend to give a lot of comfort to expecting moms who don't yet feel their baby kicking. Most expecting moms can feel the baby kicking by 18 to 20 weeks. Since miscarriage is so common before this time, it can be a real comfort to use a fetal monitor every now and then. Ultrasound machines, however, are not recommended to be used of a doctor's office.

Dec 26, 2013 | Health & Beauty

1 Answer

Viewsonic vx2235vm does not turn on


This really sounds like you have a power supply board that is having problems with the filter capacitors which are causing it to not start up correctly. Here is a like to a repair guide including video instructions showing how to open and repair the monitor.

http://www.ccl-la.com/blog/index.php/repairing-the-viewsonic-vx2235wm-lcm-monitor/

Part one of the video guide:

Feb 07, 2013 | ViewSonic VX2235wm LCD Monitor

1 Answer

How do I get the automatic return off?


Try adjusting your right hand margin to be set as far across as possible and take the typewriter off proportional spacing and set it at 10,12 or a set spacing,this should stop it from doing this if not let me know

Nov 16, 2011 | Lexmark Wheelwriter 1500 Typewriter

1 Answer

Am tryng to change the front brake pads from a 2003 town and country limited, but i need to know wich size of hex wrench do i need


Metric Size --- 10,12 what ever it takes

All vehicles from 1980 on ,use mostly Metric
Wrenches,Sockets & Torx drivers

Jul 19, 2011 | Chrysler Town and Country Cars & Trucks

1 Answer

Adler Royal Typewriter Satellite 80 just types random symbols and letters


On the lhs of the keyboard check the Pitch Sel slide switch position;...it may be in the PS position...change it to 10,12 etc, to match your print wheel.

Dec 29, 2010 | Royal Office Equipment & Supplies

1 Answer

Faulty LCD Monitor ?


off hand it sounds like a power supply issue. sometimes fixable sometimes not.

Robert

Aug 26, 2008 | Scanport Computers & Internet

2 Answers

Swintec 7040


Look for a slide showing 10,12,and 15 select 10. to bold hold down the code key and press the bold key. to capatlize hold down the shift key.

Jan 10, 2008 | Swintec 7040 Typewriter

Not finding what you are looking for?
Acer AL1916W 19" LCD Monitor Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

586 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...