Question about Uniden BCD996T Base Scanner

1 Answer

Uniden BCD996t Hi. The name is Bevil. Just bought a Uniden BCD996t trunktracker scanner. Problem is i Live in Cape Town, South Africa. Need to default my scanner because it has all US details loaded by default. Not helping me much in SA. Want to prog from scratch.

Posted by on

  • Bevil Cupido Jun 06, 2010

    Found the solution.
    Turn power off.
    Turn power back on while holding down 2+9+HOLD buttons.
    Thanks again for the help.

  • Bevil Cupido Jun 06, 2010

    Found the solution.
    Turn power off.
    Turn power back on while holding down 2+9+HOLD buttons.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I went through the manual page by page and found no info on how to doa complete system reset.You might join the BCD996T Yahoo user group and ask your question there or look through this easier to use guide I found on the internet.(http://marksscanners.com/996/996.html)

Posted on Feb 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need manuel for uniden bearcat trunktracker iii police scanner


Check your scanner for a model number. I have found an online manual for the Uniden BCT15X from Uniden: http://info.uniden.com/twiki/bin/view/UnidenMan4/BCT15X . This model has the TrunkTracker III logo to the upper left of the LCD screen. The Uniden logo is to the lower left of the LCD screen. The model number is given above the upper right of the LCD screen. Then the Bearcat logo is below the right side of the LCD screen. Some other Uniden scanner manuals are available here: http://info.uniden.com/twiki/bin/view/UnidenMan4/UnidenScannersUsersGuides . Scroll down to the Individual Scanners section to find the links.

I hope these links help.

Cindy Wells

Dec 13, 2015 | Uniden Radio Scanners

1 Answer

Power supply failure


hi .need to change the battery whit lithion battery or nimh to last longer cuz the battery comes whit id nicd short life .

Mar 16, 2014 | Uniden Bc-296d Trunktracker Iv W/apco P25...

1 Answer

I need to delete one frequency at a time from a uniden BCD996T scanner.


it scan run all nuber threw all exct there 3 numbers wont scan it like there stuck they wont move at all then weather radio come on and it turend off


t

Feb 24, 2014 | Uniden BCD996T Base Scanner

1 Answer

How to edit a frequency on a bcd996t


if you don't have the manual, go to the UNiden site and download a copy

Sep 12, 2012 | Uniden BCD996T Base Scanner

1 Answer

Unable to program trunking after uniden download was completed


I would try redownloading and reflashing the firmware on the scanner. If this doesn't work, you may want to try downgrading to the previous version of the firmware. If you are unable to redownload the firmware from Uniden, there is a Yahoogroup dedicated to this radio.

http://groups.yahoo.com/group/BCD996T/join

Also in the files section, there are older versions of the firmware.

Hope this helps!

Feb 10, 2010 | Uniden BCD996T Base Scanner

1 Answer

My pc is not recognizing the scanner


In your printer and fax folder you probably have more than one printer installed and your default printer is not the one you just installed, Select the printer you just installed and set it as your default and try again

Jun 19, 2009 | Uniden BCD996T Base Scanner

1 Answer

Uniden bcd996t


Hello wfd88,

You need a copy of Uniden Advanced Scanner Director software. You can download the software from http://www.uniden.com in the Customer Service Downloads link.
Also, as a reminder, you need to use the cable supplied with the scanner and, if I recall correctly has a Uniden custom connector on one end and a serial connector on the other. If you do not have such a cable, Uniden sells a USB to Serial converter under the model USB-1.
If, during transfer, you get an error message, reduce the scanner’s serial port speed setting and start again until you get reliable, complete transfer of data.
Let me know if this helps.

cancerags

Dec 28, 2007 | Uniden BCD996T Base Scanner

1 Answer

1.2.3.Guide


Try this link: http://myweb.cableone.net/marksscanners/996/996.html

The scanner memory is different than others in the way that it is organized. But the basic syntax is: SYSTEM/GROUP/CHANNEL.

Don't give up. It's a great little scanner.

Sep 07, 2007 | Uniden BCD996T Base Scanner

Not finding what you are looking for?
Uniden BCD996T Base Scanner Logo

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Scanners Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

473 Answers

Are you an Uniden Radio Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...