Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

I have a kenmore 110.27082603 top load washing machine. When it runs the cycle signal volume keeps beeping and alternating between load and soft. Otherwise it seems to run fine

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

This symptom indicates a stuck key on the user interface control board.
Replacing this control board would most likely fix this type of problem.
The part number for the user interface for this model is 8564374.

You can order this part from SearsPartsDirect.com, RepairClinic.com, PartSelect.com etc.

The procedure for replacing this control board is shown in the images below.


Before buying any parts I suggest you access the interface ribbon and disconnect it and then connect it back and see if there is any improvement.


You might also remove the interface from the console and check the console for any stuck buttons.

Remember to unplug the washer first.


http://media.fotki.com/1_p,wkgbsdrbswtkdqwxgtqsskgwtqkq,vi/ksgtwdgrtxkrrffsdss/1/1303472/5961857/image29464img-or.jpg

http://media.fotki.com/1_p,sqrbbsbrrbwrbdtxgtqsskgwtqkq,vi/kbqtdwdswxkbswddwbg/1/1303472/5961857/image23056img-or.gif



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cycle Signal Volume beeps from loud to soft


This is a common and very well known problem with the Oasis. You will need to replace the operator interface board inside the control panel to resolve this issue. The board is located directly behind the control knob. If you post back with your model number, I can research a part number for you, give you info on where you can order a replacement, and give you guidance on how to replace the board yourself.

Feb 12, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Washing mchine stops during cycle and starts beeping


See if you are overfilling you machine or the load is out of balance. Even try running the machine empty

Jan 19, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Beeping


stuck key or bad control

Nov 09, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Cycle Signal beeping constantly


Hello dtaylorws,


You said,The cycle signal keeps alternating between loud and soft on its own and the other buttons will not function while this is happening, including the start button.


You could have a bed signal switch or control panel .
if the below suggestion failes or the problem returns you will need service!
Try unplugging the washer for 5 minutes and then restart it.
This should reset the system if there is a glitch like in a computer!
Sounds like we need to try to reset the system!

Huuum At your service!
Lets try this,
Like with an error code.
This can reset the system if it is electronic!
Unplug the washer and wait a 5 minutes then restart it.
If you can't reach the plug, use the breaker to cut the power for 5 minutes.

It's like rebooting your computer when its acting strange!
Usually it corrects some error problems if they are not serious.
Or they are sometimes just a glitch.

Let me know how it works! Waiting for your reply!
Please remember to leave a rating when you are done!
Thank You huuum




Sep 20, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

3 quick beeps during cycle if you can get it to stay in a cycle


MY KENMORE OASIS HE IS DRIVING ME CRAZY! THE CYCLE SIGNAL CONTINUES TO BEEP AT LEAST 25 TIMES, STOPS FOR MAYBE 20 SECONDS, THEN BEEPS AGAIN ABOUT 25 TIMES. THE WASHER WORKS GREAT, BUT IT WILL NOT STOP BEEPING! HELP!!!!!

Sep 13, 2008 | Kenmore Oasis HE 27062 Top Load Washer

1 Answer

F2 and beeping


The F2 error is the user control board gone south on you, a new board will fix the machine, as always do you own your home and does the insurance cover appliances?

Sep 05, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Clean Cycle


I had the same problem. After unplugging and plugged it in several times, I got it to switch to a wash cycle. But now it beeps every 20 seconds.

Aug 23, 2008 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Loud/Soft signal


all i can figure is it is a strange method by kenmore to alert the user to throw in an antistatic cloth that gives softer clothes (clothes softener sheets)

May 25, 2007 | Kenmore 67052 Dryer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5481 Answers

Mike Squire

Level 2 Expert

391 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...