Question about Kodak EasyShare C310 Digital Camera

1 Answer

When i try taking a picture the camera turns off and theres nothing but a blinking red light everytime.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I mistakely deleted pictures from my camera (Kodax Esay Share M340) Move picture to internal memory.How can i get the pictures back


If Try one or more of the following

Ready light does not turn on and the camera does not work.

Ready light blinks green.

  • Camera is operating normally.

Ready light blinks amber.

  • Wait. Resume picture taking when the light stops blinking and turns green.

Ready light blinks red and camera turns off.

Ready light glows steady red.

Ready light is off or glows steady green.

  • Camera is operating normally

Mar 10, 2011 | Kodak Cameras

2 Answers

Should the power light be green or red, when I turn camera on it shows a green light then turns red


Red light indicates that the camera is out of charged., Try to charged your battery for 3-4 hrs if you encounter flashing red on a fully charged battery you need to call kodak 1 800 235 6325 ext 12

You can charged you camera using 5V AC Adaptor or a USB cable taht attached into the computer

Nov 16, 2009 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

Red light blinking, when on Standby


If you have a warrenty take it back. but thats the sound itmakes when you try to eject the disk and nothing is in there.

Aug 23, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Well a few years ago I purchased a Nikon Coolpix 4600 4MP Digital Camera and everytime I try to take a picture the AF light flashes red. Why is that?


Hello Winniethe383,
AF stands for "Auto Focus", When you are clicking a snap, the camera is trying to bring the subject into focus and the Red light blinking is to show the status that the camera is busy Focusing.
Please let me know in case you need any further details and I would be glad to assist you further :)

Regards,
Srinivas

Apr 07, 2009 | Nikon Coolpix 4600 Digital Camera

1 Answer

Broken?


check out the memory card... try taking pics without the memory card in and see if it is still doing the same thing

Dec 15, 2008 | Olympus FE-210 Digital Camera

1 Answer

Red light keeps blinking when I try and take a picture


actually the flash ckt is having problem that is the reason the red indicater blinks. you can take photographs with flash off mode,to solve this problem you will have to contact service centre

Dec 08, 2008 | Casio EXILIM ZOOM EX-Z60 Digital Camera

1 Answer

Blinking red indicator light


Hey pollyannac,
The red blinking light probably means either the flash is recharging, or the camera buffer is full and it is writing files to your memory card which the lcd monitor should read Busy while the camera is writing the files. If it is the flash recharging then you could try using more powerful batteries such as the Canon NiMH AA batteries. If the problem ends up being the camera is writing images to the memory card you could try getting a memory card that has a high write speed. These memory card are usually more expensive, but in my opinion well worth it. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.

Jun 04, 2008 | Canon PowerShot A720 IS Digital Camera

1 Answer

I CANNOT TAKE PICTURES WITH MY CYBER-SHOT DSC-W35... HELP!!!


Check Mode-Dial of camera. it has set on Movie mode. Select Auto mode to take snaps. this idea is for cysber-shot camera.

May 28, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

2 Answers

Cant get it right


Here's a couple things to try. It has an auto focus. This may require you to hold the camera's shutter button half way down to get the focus. Then press it all the way down to get the picture. Make sure the flash is working or that you have enough light. It's really hard to get a pic in the dark. Resolution may also be a problem. Resolution is how many pixels it takes to make a picture. Bump it up to the highest resolution on this cam. 2.11 Mega pixels If nothing else it will make prints look sharper. I hope this helps.

Jul 13, 2007 | Vivitar ViviCam 3615 Digital Camera

Not finding what you are looking for?
Kodak EasyShare C310 Digital Camera Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...