- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure your tape tab is open. See if this works. Sometimes the tab should be closed to prevent eraser or recording over existing film but sometimes the tape tab has to be open to allow for playback or dubbing?
If you mean no picture during camera mode(that is all black screen), Something must be done to your camera. Iris motor unit fails to open causes the problem of no picture since iris is close. Solution, clean iris curtain, needs skill. I suggest have it checked by qualified person. Hope it helps, Good luck
Just bought the exact one from a yard sale for 20 bucks.
Had the very same problem with the blue screen on playback. What i did is replace the battery in the small bay when you open the viewfinder. Try playing your tape again and it will work!
I believe sometime when you insert the AC Adaptor while the power switch still on in CAM mode or VTR mode the sparking cause the micro fuse protection blew up it require a qualifier and trained from Sony to repair it
I had this service manual how do I post to you it big about 15MB
I sugges to bring it to Sony for repair it sometime they can not repair at component level they replace a complet PCB and it need the computer to setup and adjust and highly cost
I hope that give you some ideas
You can see an image in a camcorder viewfinder any time the camera's actually on in record mode, whether or not the camcorder is actually recording. So that's no guarantee.
Assuming the obvious (you have the right kind of tapes, they're not in write-protect mode, you rewind before playing, etc). I recommend that you borrow a tape of the same kind from someone else and check it on playback in your camcorder. This should lead you know understand if you have a playback problem or a recording problem.
The Switch block control is a problem after non use or after use in beaches and Humid places.
We can help you in spares and service manuals.
Pl.let us know after an examination at your end.Pl.confirm the defective part.